Villa area FPS problem

[瑞骐首领]

Villa area FPS problem
After completing the story, I bought villas in areas A, B, and C. There was a little lag before building the villas. I thought it was because they were not completed. Later, after building villas in all three areas, it was still lagging. As long as I reached the villas in the three areas, the FPS would drop to 20-30, but I never had FPS drop in other places. I also found a lot of posts about FPS drop, lowered all options of game graphics, Update Graphics Drivers, Update Operating System, Adjust Graphics Settings: Lower the in-game graphics settings, ini is also set to
sg.ViewDistanceQuality=0
sg.AntiAliasingQuality=0
sg.ShadowQuality=0
sg.PostProcessQuality=0
sg.TextureQuality=0
sg.EffectsQuality=0
sg.FoliageQuality=0
Also limit FPS to 60
But, it still has no effect, because I didn't experience FPS drop anywhere else, only in the villas in area A, B, and C, the FPS dropped to 20-30. Has anyone encountered the same problem?

My computer configuration
Device name Satan_Cheung
CPU 12th Gen Intel(R) Core(TM) i5-12450H 2.00 GHz
RAM 32.0 GB
Graphics card NVIDIA GEFPRCE RTX 3070 LAPTOP GPU


Key point: There is no frame drop in other places. Only in the villas in areas A, B, and C, the FPS will drop to around 20-30.

[Zeno]

The FPS drop in the villa areas is probably due to unoptimized game assets or too many objects loading at once in those zones.

Basically, even a solid PC like yours can get bogged down if the game engine struggles with certain areas.

A quick fix to try would be lowering the draw distance even more if possible or, if the game allows, reducing the object density. You could also check if there are community patches or mods, as sometimes other players create fixes for these exact kinds of issues. I haven't checked if this is possible in settings.

[瑞骐首领]

Originally posted by Furchenlurch:

The FPS drop in the villa areas is probably due to unoptimized game assets or too many objects loading at once in those zones.

Basically, even a solid PC like yours can get bogged down if the game engine struggles with certain areas.

A quick fix to try would be lowering the draw distance even more if possible or, if the game allows, reducing the object density. You could also check if there are community patches or mods, as sometimes other players create fixes for these exact kinds of issues. I haven't checked if this is possible in settings.

I have tried to set all the adjustable image quality options in the game options to the lowest, but as soon as I go to the villas in area A, B, and C, the FPS will drop to 20-30, sometimes only a pitiful 18......... Especially when facing a certain direction, for example, when I just enter the villa wall of area A and face the villa, the FPS is only 18-19...

I also want to reduce the drawing distance, but I can't find a way to reduce the drawing distance in the game options. Do I need to add something to the INI file?

[Zeno]

Originally posted by 瑞骐首领:

Originally posted by Furchenlurch:

The FPS drop in the villa areas is probably due to unoptimized game assets or too many objects loading at once in those zones.

Basically, even a solid PC like yours can get bogged down if the game engine struggles with certain areas.

A quick fix to try would be lowering the draw distance even more if possible or, if the game allows, reducing the object density. You could also check if there are community patches or mods, as sometimes other players create fixes for these exact kinds of issues. I haven't checked if this is possible in settings.

I have tried to set all the adjustable image quality options in the game options to the lowest, but as soon as I go to the villas in area A, B, and C, the FPS will drop to 20-30, sometimes only a pitiful 18......... Especially when facing a certain direction, for example, when I just enter the villa wall of area A and face the villa, the FPS is only 18-19...

I also want to reduce the drawing distance, but I can't find a way to reduce the drawing distance in the game options. Do I need to add something to the INI file?

Try adding or adjusting these lines in the INI file (usually found in the game's configuration folder, often under AppData or the game’s directory):

[SystemSettings]
r.ViewDistanceScale=0.5 ; Set between 0.1 (low) to 1.0 (high)
r.LODDistanceFactor=0.5 ; Lowering this can help with object detail at distance

[瑞骐首领]

Originally posted by Furchenlurch:

Originally posted by 瑞骐首领:

I have tried to set all the adjustable image quality options in the game options to the lowest, but as soon as I go to the villas in area A, B, and C, the FPS will drop to 20-30, sometimes only a pitiful 18......... Especially when facing a certain direction, for example, when I just enter the villa wall of area A and face the villa, the FPS is only 18-19...

I also want to reduce the drawing distance, but I can't find a way to reduce the drawing distance in the game options. Do I need to add something to the INI file?

Try adding or adjusting these lines in the INI file (usually found in the game's configuration folder, often under AppData or the game’s directory):

[SystemSettings]
r.ViewDistanceScale=0.5 ; Set between 0.1 (low) to 1.0 (high)
r.LODDistanceFactor=0.5 ; Lowering this can help with object detail at distance

Thank you very much.
Is it added to "GameUserSettings.INI"?or "Engine.INI"?

[瑞骐首领]

Originally posted by Furchenlurch:

Originally posted by 瑞骐首领:

I have tried to set all the adjustable image quality options in the game options to the lowest, but as soon as I go to the villas in area A, B, and C, the FPS will drop to 20-30, sometimes only a pitiful 18......... Especially when facing a certain direction, for example, when I just enter the villa wall of area A and face the villa, the FPS is only 18-19...

I also want to reduce the drawing distance, but I can't find a way to reduce the drawing distance in the game options. Do I need to add something to the INI file?

Try adding or adjusting these lines in the INI file (usually found in the game's configuration folder, often under AppData or the game’s directory):

[SystemSettings]
r.ViewDistanceScale=0.5 ; Set between 0.1 (low) to 1.0 (high)
r.LODDistanceFactor=0.5 ; Lowering this can help with object detail at distance

Thank you, it works now. I added it to Engine.ini, re-entered the game and went to the villa in area A. The FPS in the same location can now reach 40. Thank you very much.

[瑞骐首领]

Originally posted by Furchenlurch:

Originally posted by 瑞骐首领:

I have tried to set all the adjustable image quality options in the game options to the lowest, but as soon as I go to the villas in area A, B, and C, the FPS will drop to 20-30, sometimes only a pitiful 18......... Especially when facing a certain direction, for example, when I just enter the villa wall of area A and face the villa, the FPS is only 18-19...

I also want to reduce the drawing distance, but I can't find a way to reduce the drawing distance in the game options. Do I need to add something to the INI file?

Try adding or adjusting these lines in the INI file (usually found in the game's configuration folder, often under AppData or the game’s directory):

[SystemSettings]
r.ViewDistanceScale=0.5 ; Set between 0.1 (low) to 1.0 (high)
r.LODDistanceFactor=0.5 ; Lowering this can help with object detail at distance

I would also like to ask if there is any way to remove the grass on the ground. I suspect that the frame rate of the villa in area A is reduced because there is too much grass. I have already set the vegetation to 0 in the ini, but it doesn't help.

[Zeno]

Originally posted by 瑞骐首领:

Originally posted by Furchenlurch:

Try adding or adjusting these lines in the INI file (usually found in the game's configuration folder, often under AppData or the game’s directory):

[SystemSettings]
r.ViewDistanceScale=0.5 ; Set between 0.1 (low) to 1.0 (high)
r.LODDistanceFactor=0.5 ; Lowering this can help with object detail at distance

Thank you, it works now. I added it to Engine.ini, re-entered the game and went to the villa in area A. The FPS in the same location can now reach 40. Thank you very much.

Great. No worries.

Originally posted by 瑞骐首领:

Originally posted by Furchenlurch:

Try adding or adjusting these lines in the INI file (usually found in the game's configuration folder, often under AppData or the game’s directory):

[SystemSettings]
r.ViewDistanceScale=0.5 ; Set between 0.1 (low) to 1.0 (high)
r.LODDistanceFactor=0.5 ; Lowering this can help with object detail at distance

I would also like to ask if there is any way to remove the grass on the ground. I suspect that the frame rate of the villa in area A is reduced because there is too much grass. I have already set the vegetation to 0 in the ini, but it doesn't help.

No, I think if its set to 0, you cant remove it.

[瑞骐首领]

Originally posted by Furchenlurch:

Originally posted by 瑞骐首领:

Thank you, it works now. I added it to Engine.ini, re-entered the game and went to the villa in area A. The FPS in the same location can now reach 40. Thank you very much.

Great. No worries.

Originally posted by 瑞骐首领:

I would also like to ask if there is any way to remove the grass on the ground. I suspect that the frame rate of the villa in area A is reduced because there is too much grass. I have already set the vegetation to 0 in the ini, but it doesn't help.

No, I think if its set to 0, you cant remove it.

Finally... the problem was solved... It was really a problem with the new version of grass... Later I tried many methods... Finally... I was able to right click the game in library > go to Properties > then under Betas there should be an option to click on original visuals.... After restoring the original visuals, I also set all the graphic effects to the highest. Now I have reached the villas in areas A, B, and C. There is no frame drop...so happy

[kinekanek]

Originally posted by 瑞骐首领:

Originally posted by Furchenlurch:

Great. No worries.





No, I think if its set to 0, you cant remove it.

Finally... the problem was solved... It was really a problem with the new version of grass... Later I tried many methods... Finally... I was able to right click the game in library > go to Properties > then under Betas there should be an option to click on original visuals.... After restoring the original visuals, I also set all the graphic effects to the highest. Now I have reached the villas in areas A, B, and C. There is no frame drop...so happy

Man do i love you there was grass spot near east dessert lagging my game and overall it was going badly but now smooth like firt time i ever played thank you so much, (i know schedule 1 is better)