Marijuana mix question.

[Anna-May T]

So I got the game a few days ago. Been loving it so far, very different from the usual survival games I play. But anyways, played around with it for a bit now I am doing a drug specific playthrough. I am starting with weed only, but obviously it is not addictive. I found a recipe called BlueGrass. 1g Acetone, 80g weed, 20g Viagra, but no actual directions. I have not dont any kind of mixes with liquids yet, so I wanted to ask before i waste product. Please let me know if I am accurate on my assumption and/or if I need to change. If I understand it, grind up V, put dry weed, ground V, and Acetone in the little dish mixxy thing. Not the flask, but the little white dish from the pharmacy. once there, I put it in the dryer or crystalizer. I am not so worried about product loss at this point, just that I understand the steps........ Thanks in advance

[v7]

So to answer some questions before I give you instructions on mixing; here's how the equipment works:
To mix weed you need to soak it, using preferrably a Large Flask or Lab Fluid Trays.
To use them; you must add 1g first everytime to start mixing (note that the Acetone will dry/evaporate once the mix is crystalised/dried; so you'll end up with a 399g total mix per Flask)
After adding 1g Acetone; add the drugs/additives (etc) and Apply Mix. Once that's done, you can either Dry or Crystalise the output. Crystalising will allow you to mill the mix to use for other mixes and all that which we won't get into now.
If you're intending to Sell the mix; dry it so it's concidered Marijuana again. You cannot sell weed in crystal/powder form. Only Dried form is accepted by the game.


Now for your mix, you'll need a lab fluid tray from the pharmacy, a dryer/large dryer and any milling equipment (mortar/electric coffee miller which is best)

1- Mill 20g Viagra in a mortar/electric coffee miller
2- Add 1g Acetone to a Flask/Lab fluid tray
3- Add 80g Weed
4- Add the 20g viagra you milled earlier (will be ~19.8g or so if milled with processing loss)
5- Apply Mix
6- Add that mix to a dryer/large dryer
7- Dry the mix
8- Package the mix/store it in a container
9- You're done; you can start selling the mix
(Note: You can crystalise the mix instead of drying it, and then mill the result from crystaliser to use it in another mix if you'd like to, depends on your drug cut; there's many better fillers/premixes though)

Hope this helped, glad you're enjoying the game! Have fun.

[LeepriesT]

Originally posted by v7x:

So to answer some questions before I give you instructions on mixing; here's how the equipment works:
To mix weed you need to soak it, using preferrably a Large Flask or Lab Fluid Trays.
To use them; you must add 1g first everytime to start mixing (note that the Acetone will dry/evaporate once the mix is crystalised/dried; so you'll end up with a 399g total mix per Flask)
After adding 1g Acetone; add the drugs/additives (etc) and Apply Mix. Once that's done, you can either Dry or Crystalise the output. Crystalising will allow you to mill the mix to use for other mixes and all that which we won't get into now.
If you're intending to Sell the mix; dry it so it's concidered Marijuana again. You cannot sell weed in crystal/powder form. Only Dried form is accepted by the game.


Now for your mix, you'll need a lab fluid tray from the pharmacy, a dryer/large dryer and any milling equipment (mortar/electric coffee miller which is best)

1- Mill 20g Viagra in a mortar/electric coffee miller
2- Add 1g Acetone to a Flask/Lab fluid tray
3- Add 80g Weed
4- Add the 20g viagra you milled earlier (will be ~19.8g or so if milled with processing loss)
5- Apply Mix
6- Add that mix to a dryer/large dryer
7- Dry the mix
8- Package the mix/store it in a container
9- You're done; you can start selling the mix
(Note: You can crystalise the mix instead of drying it, and then mill the result from crystaliser to use it in another mix if you'd like to, depends on your drug cut; there's many better fillers/premixes though)

Hope this helped, glad you're enjoying the game! Have fun.

Hi, dried the formula and now its classified as crystal therefore I cannot sell it as marihuana. Did I do anything wrong? Ratio 10% Viagra to Marihuana and I dried it.

[Mathias Kane]

Yeah, I'm having the same issue. This was in a video I saw, which is making me think that it used to work but doesn't now for some reason.

[Bobby S]

it used to be that you add everything in the flask. But leave 1g space for 1g of dry weed, the same weed type as your wet weed. Then in the dryer it will make it a dry plant product.
it may not work now tho i did want to test it out will let you know

tested.. had to run to my other lab for the wet weed and got into a chase with the 5o
Not the only bad news.
It will not turn into dry plant product anymore (good thing i still have some)
And you cant add your cut from a flask into a dryer with wet weed,
Everything has to be one mix

[XOCE]

As far as I know, in order to get laced weed, which is categorized as "marihuana" or "dry plant", you have to use actual dried weed in the mix. i.e. when you harvest your plants, dry the material first and after that use the dried product (probably it works with cartel-bought weed also).
Then do the procedure described above and after that dry the mix again.
I've never done this myself, so I cannot 100% confirm it.
You can also check the guides section in this forum - there is a specific guide for weed mixing.

[v7]

If you use wet weed in your mix, it will have processing loss when you dry or crystalise it, so you would be adding half of the wet weed essentially depending on the seed.
To avoid messing up the recipe, you should always use dried weed in recipes, or use other methods to take it into account. For example, you can have the same amount of wet weed but put half the other ingredients.
You can also put the same mix ingredients but twice as much weed to take the loss into account, but the large flask might not fit the whole mix this way (400g max)

If this is still unclear or someone didn't understand what I'm talking about, let me know & I'll try explaining this in a simpler manner.

[halfbaked2001]

Add Weed last then dry.

[Imran Khan]

Just grow it and sell it. If you are somehow having a problem selling it, the psychedelic gang will buy unlimited quantities whenever you deliver it, but you have to package it in kilos for them.

[Big Jazza]

Originally posted by v7x:

So to answer some questions before I give you instructions on mixing; here's how the equipment works:
To mix weed you need to soak it, using preferrably a Large Flask or Lab Fluid Trays.
To use them; you must add 1g first everytime to start mixing (note that the Acetone will dry/evaporate once the mix is crystalised/dried; so you'll end up with a 399g total mix per Flask)
After adding 1g Acetone; add the drugs/additives (etc) and Apply Mix. Once that's done, you can either Dry or Crystalise the output. Crystalising will allow you to mill the mix to use for other mixes and all that which we won't get into now.
If you're intending to Sell the mix; dry it so it's concidered Marijuana again. You cannot sell weed in crystal/powder form. Only Dried form is accepted by the game.


Now for your mix, you'll need a lab fluid tray from the pharmacy, a dryer/large dryer and any milling equipment (mortar/electric coffee miller which is best)

1- Mill 20g Viagra in a mortar/electric coffee miller
2- Add 1g Acetone to a Flask/Lab fluid tray
3- Add 80g Weed
4- Add the 20g viagra you milled earlier (will be ~19.8g or so if milled with processing loss)
5- Apply Mix
6- Add that mix to a dryer/large dryer
7- Dry the mix
8- Package the mix/store it in a container
9- You're done; you can start selling the mix
(Note: You can crystalise the mix instead of drying it, and then mill the result from crystaliser to use it in another mix if you'd like to, depends on your drug cut; there's many better fillers/premixes though)

Hope this helped, glad you're enjoying the game! Have fun.

I put wet weed in a container and now I can't get it out, what do i do? :(

[Panophobe]

For anyone who stumbles upon this, here's the issue that you're running into:
You're trying to lace your fresh-grown weed. The weed you harvest is still wet. It needs to be dried first.

After you dry it (which, fyi, will cut its weight down significantly), you can use it with the flask, a solvent (Acethone) and any adulterant (pills, coke, amphetamine, whatever) that you want. Dry it again after the mix (it won't lose weight this time), and you're good to go.

[Imran Khan]

I played a weed only game and never had problems getting people addicted. It would be really weird to soak marijuana in acetone and put viagra in it in real life.

[Imran Khan]

Originally posted by Imran Khan:

Just grow it and sell it. If you are somehow having a problem selling it, the psychedelic gang will buy unlimited quantities whenever you deliver it, but you have to package it in kilos for them.

That's what I did in my weed only game. Sales were pretty slow, and I made most of my money growing and selling to the psychedelics gang.

[Deinsensai]

DDS1 is all about mixing right? I played some time and I tried it once, is it that much profit we can make for that effort? Grinding, mixing, packaging so many steps? Rather than just actually sell the 100% Dope to Clients - less headache and less effort right? Or am I wrong? I made a whole lot of Money by just selling pure Dope without mixing, so i´m not sure about that Feature, if anyone can enlightening me

Another Question, is there a set Limit for the max Price we can adjust for our Drugs to sell when we have that related Skill already on Max, is there anyway to increase the Price even further? What exactly determine that? Higher LvL too?