Multiple Baggage Hub Question

[HunterJohn]

I am stuck on this. I found that you can only have 5 producers along the conveyor to the hub. So I have 5 ticket desks that use a conveyor that goes to a baggage hub. That hub then sends to a depot and the depot then sends back to the hub and one output to the carousel. All good; but now I add another 5 ticket desks and I want to use the same depot.

I can't figure out how to make this work... The screenshot has my bottom 2 conveyors coming from the two ticket lines one floor up. The hub in the center, then the depot at the right, and the carousel at the top. Can I get both ticket lines to the same depot?

https://steamcommunity.com/sharedfiles/filedetails/?id=2028730843

Thanks.

[chick10000]

Hi,

Yes it should be no problem just connect that one way conveyor to one of the 2 open ports on the hub. The port on the hub has to be changed to consumer. click hub then right click on port and change it. The hub will do all the sorting for you.

I would leave one port on the hub open for future connections to other hubs so if you add more ticketing desk and a new hub and connect the 2 together.

That should do it

[HunterJohn]

Originally posted by chick10000:

Hi,

Yes it should be no problem just connect that one way conveyor to one of the 2 open ports on the hub. The port on the hub has to be changed to consumer. click hub then right click on port and change it. The hub will do all the sorting for you.

I would leave one port on the hub open for future connections to other hubs so if you add more ticketing desk and a new hub and connect the 2 together.

That should do it

OK, thanks. I also got it to work by adding the second hub and realizing the conveyor section between the two hubs has to be a two-way conveyor. Haven't thought that one through yet, but it is working!

John