No Post Stall Maneuver with XBOX 360 Controller ?

[Forneus]

Maybe I'm dumb, but I can't get Post Stall Maeuvers to work with my XBOX 360 Controller. Anyone with the same problem ?

[Draconyum]

Get below 500 km/h then press both brake and thruster buttons after you did that push back the left stick, at first it's a bit tricky and not every aircraft can do PSM

[[NcK]MasterShake|CM]

Probably easier if you switch the yaw to analog and the throttle to digital control.

[Mr.Gentlespy]

Do what Draconyum said, but try to stay around 450km/h. I have an X360 controller and I'm managing to do it.

[kitsunelegendXx]

Why do I feel like the only person using knots/feet for the HUD....?

[Unaimed Player]

Here is a video explaining how to do it and saying which aircrafts can do it.

https://www.youtube.com/watch?v=zbebkgZjx7A

[Corvus]

Not all aircrafts are capable of doing it either.

[MasterX]

Originally posted by kitsunelegendXx:

Why do I feel like the only person using knots/feet for the HUD....?

I do the PSMs at about 250 knots

[BrySkye]

Yeah, somewhere between 230/270kts should get you in the ball park.

The really really important detail that the 'big' video tutorials didn't really make clear enough is that after hitting the triggers/shoulder buttons together for High-G, wait for a few moments, half a second or so, before pulling back on the stick.

Apart from being limited to certain aircraft, pressing the buttons and pulling back on the stick at the same time is going to cause high amounts of frustration.

[Draconyum]

Also I might add that you need to press the thrust button after pushing the back the left stick otherwise the aircraft might stall

[Neel Yekk]

Originally posted by BrySkye:

Yeah, somewhere between 230/270kts should get you in the ball park.

The really really important detail that the 'big' video tutorials didn't really make clear enough is that after hitting the triggers/shoulder buttons together for High-G, wait for a few moments, half a second or so, before pulling back on the stick.

Wow, thank you for shating this! I've been trying to figure out the solution for at least twenty minutes, as I (thought I) did exactly what the turorials suggested, but failed to notice this delay.