Store Page
ACE COMBAT™7: SKIES UNKNOWN
All Discussions Screenshots Artwork Broadcasts Videos News Guides Reviews

ACE COMBAT™7: SKIES UNKNOWN

Store Page
View Stats:
Global Achievements
flying bandit May 27, 2019 @ 2:41am
T16000M and TWCS Throttle
it took me three weeks to figure out how UCR works
awsome it works and set all sellings to my favorite position's
on the T16000M and TWCS Throttle
but nou im sad and 😢😡😡😡😡
I have completely set UCR and yet the program returns all settings to standard
since the last update last week

I hope sameone has a solution for this Thanks

SOLUTION FINALLY FOUND !!!

THANKS TO lobomart


Thanks to lubomart i finally found out how to set up my Thrustmastrer T16000M and TWCS Throttle

Run AC7 to update Input.ini file.
Close AC7.
Open Input.ini file in notepad. Located in
C:/USER/YOURNAME/AppData/Local/BANDAI NAMCO Entertainment/ACE COMBAT 7/Config/input


this is my set up

[JoystickSetting]
EnableJoystick=True
EnableDeviceJoystick=True
EnableDeviceFlight=True
EnableDevice1stPerson=True

[JoystickMappingFormat]
HelpComment=" ObjectFormat"
HelpComment=" X, Y, Z, Rx, Ry, Rz, Slider[1-2], POV_[U, D, L, R][1-4], Button[1-32]"
HelpComment=
HelpComment=" ValueFormat"
HelpComment=" Object, Object:[P, N, R, C]...[P, N, R, C]"
HelpComment=" P:PositiveValue / N:NegativeValue / R:ReverseSign / C:ConvertRange(+1.0~-1.0 -> 0.0~1.0)"
HelpComment=
HelpComment=" MappingFormat"
HelpComment=" Value, Value1 [&, !, +, >, <] Value2"
HelpComment=" &:IfValue2!=0 / !:IfValue2==0 / +:AddValue / >:SelectLarger / <:SelectSmaller"
HelpComment=
HelpComment=" Example"
HelpComment=" Flight_Pitch=Y:R !"
HelpComment=" Flight_HatSwitchRight=POV_R1"

[Joystick-B10A044F-0000-0000-0000-504944564944]
ProductName=T.16000M
Flight_Gun=Button1
Flight_Missile=Button3
Flight_Weapon=Button4
Flight_Target=Button2
Flight_Radar=Button15
Flight_Flare=Button16
Flight_View=Button14
Flight_AccelerationDeceleration=
Flight_AutoPilot=Button6
Flight_Pause=Button13
Flight_HatSwitchUp=POV_U1
Flight_HatSwitchDown=POV_D1
Flight_HatSwitchLeft=POV_L1
Flight_HatSwitchRight=POV_R1
Flight_Pitch=Y:R
Flight_Roll=X
Flight_Yaw=Rz
Flight_Throttle=
Flight_CameraPitch=POV_U1
Flight_CameraPitch=POV_D1:R
Flight_CameraYaw=POV_L1
Flight_CameraYaw=POV_R1:R
UI_B=Button3
UI_A=Button1
UI_X=Button4
UI_Y=Button2
UI_LB=
UI_RB=
UI_LT=Z
UI_RT=Z
UI_LeftStickPress=
UI_RightStickPress=
UI_DPadUp=POV_U1
UI_DPadDown=POV_D1
UI_DPadLeft=POV_L1
UI_DPadRight=POV_R1
UI_LeftStickUp=Y:N
UI_LeftStickDown=Y:P
UI_LeftStickLeft=X:N
UI_LeftStickRight=X:P
UI_RightStickUp=
UI_RightStickDown=
UI_RightStickLeft=
UI_RightStickRight=
UI_Menu=Button13

[Joystick-B687044F-0000-0000-0000-504944564944]
ProductName=TWCS Throttle
Flight_Gun=
Flight_Missile=
Flight_Weapon=
Flight_Target=
Flight_Radar=Button2
Flight_Flare=Button1
Flight_View=Button6
Flight_AccelerationDeceleration=Button5
Flight_AutoPilot=Button3
Flight_Pause=
Flight_HatSwitchUp=POV_U1
Flight_HatSwitchDown=POV_D1
Flight_HatSwitchLeft=POV_L1
Flight_HatSwitchRight=POV_R1
Flight_Pitch=
Flight_Roll=
Flight_Yaw=Rz
Flight_Yaw=Slider2
Flight_Throttle=Z
Flight_CameraPitch=Y
Flight_CameraYaw=X
UI_B=
UI_A=
UI_X=
UI_Y=
UI_LB=
UI_RB=
UI_LT=
UI_RT=
UI_LeftStickPress=
UI_RightStickPress=
UI_DPadUp=POV_U1
UI_DPadDown=POV_D1
UI_DPadLeft=POV_L1
UI_DPadRight=POV_R1
UI_LeftStickUp=Y:N
UI_LeftStickDown=Y:P
UI_LeftStickLeft=X:N
UI_LeftStickRight=X:P
UI_RightStickUp=
UI_RightStickDown=
UI_RightStickLeft=
UI_RightStickRight=
UI_Menu=
Last edited by flying bandit; May 30, 2019 @ 6:20am
< >
Showing 1-14 of 14 comments
bingbean May 27, 2019 @ 4:09am 
You don't need UCR anymore. Just edit input.ini file.
#1
flying bandit May 30, 2019 @ 1:46am 
Thank have to figure it out but i think i will
now i can finaly play how i want to
You made my day THANKS !!!!!
Last edited by flying bandit; May 30, 2019 @ 1:46am
#2
MrCrowMHX May 30, 2019 @ 6:51am 
have the same controller, but it does not run. I have followed your instructions. Did I forgot something ? Thank you!!!
Last edited by MrCrowMHX; May 30, 2019 @ 6:52am
#3
bingbean May 30, 2019 @ 9:48am 
Originally posted by flying bandit:
Thank have to figure it out but i think i will
now i can finaly play how i want to
You made my day THANKS !!!!!

I really don't understand why Bandai Namco didn't tell us, there is this option?


Originally posted by MrCrowMHX:
have the same controller, but it does not run. I have followed your instructions. Did I forgot something ? Thank you!!!

So then maybe you have somting wrong in {steam} - {settings} - {controller} - {general controller settings}. Don't know why , but when is {Generic Gamepad Configuration Support} check, then joystick don't work in game.

So uncheck that, if you have checked.




#4
MrCrowMHX May 30, 2019 @ 10:08am 
Thanks a lot! it runs!
#5
flying bandit May 31, 2019 @ 2:06am 
Originally posted by MrCrowMHX:
Thanks a lot! it runs!
that's awsom have fun :-))
#6
shawzy007 Jun 30, 2020 @ 12:19pm 
Wow saved me I just came across this and its now working. The thrustmaster website says this setup is plug and play and officially supported but its clearly not. One question does the throttle actually work as intended or is it fully off or on with a slight movement? as it seems to me its at 100% when its only say 50% the way if you get me? thanks
#7
bingbean Jun 30, 2020 @ 2:28pm 
Originally posted by danielshaw007:
Wow saved me I just came across this and its now working. The thrustmaster website says this setup is plug and play and officially supported but its clearly not. One question does the throttle actually work as intended or is it fully off or on with a slight movement? as it seems to me its at 100% when its only say 50% the way if you get me? thanks

Slider on t16000m control throttle to in default. Copy paste the OP seting in yours input.ini and it will work corect.
#8
shawzy007 Jun 30, 2020 @ 2:30pm 
all sorted thanks guys
#9
dodovici Jan 7, 2021 @ 12:09pm 
Originally posted by flying bandit:
it took me three weeks to figure out how UCR works
awsome it works and set all sellings to my favorite position's
on the T16000M and TWCS Throttle
but nou im sad and 😢😡😡😡😡
I have completely set UCR and yet the program returns all settings to standard
since the last update last week

I hope sameone has a solution for this Thanks

SOLUTION FINALLY FOUND !!!

THANKS TO lobomart


Thanks to lubomart i finally found out how to set up my Thrustmastrer T16000M and TWCS Throttle

Run AC7 to update Input.ini file.
Close AC7.
Open Input.ini file in notepad. Located in
C:/USER/YOURNAME/AppData/Local/BANDAI NAMCO Entertainment/ACE COMBAT 7/Config/input


this is my set up

[JoystickSetting]
EnableJoystick=True
EnableDeviceJoystick=True
EnableDeviceFlight=True
EnableDevice1stPerson=True

[JoystickMappingFormat]
HelpComment=" ObjectFormat"
HelpComment=" X, Y, Z, Rx, Ry, Rz, Slider[1-2], POV_[U, D, L, R][1-4], Button[1-32]"
HelpComment=
HelpComment=" ValueFormat"
HelpComment=" Object, Object:[P, N, R, C]...[P, N, R, C]"
HelpComment=" P:PositiveValue / N:NegativeValue / R:ReverseSign / C:ConvertRange(+1.0~-1.0 -> 0.0~1.0)"
HelpComment=
HelpComment=" MappingFormat"
HelpComment=" Value, Value1 [&, !, +, >, <] Value2"
HelpComment=" &:IfValue2!=0 / !:IfValue2==0 / +:AddValue / >:SelectLarger / <:SelectSmaller"
HelpComment=
HelpComment=" Example"
HelpComment=" Flight_Pitch=Y:R !"
HelpComment=" Flight_HatSwitchRight=POV_R1"

[Joystick-B10A044F-0000-0000-0000-504944564944]
ProductName=T.16000M
Flight_Gun=Button1
Flight_Missile=Button3
Flight_Weapon=Button4
Flight_Target=Button2
Flight_Radar=Button15
Flight_Flare=Button16
Flight_View=Button14
Flight_AccelerationDeceleration=
Flight_AutoPilot=Button6
Flight_Pause=Button13
Flight_HatSwitchUp=POV_U1
Flight_HatSwitchDown=POV_D1
Flight_HatSwitchLeft=POV_L1
Flight_HatSwitchRight=POV_R1
Flight_Pitch=Y:R
Flight_Roll=X
Flight_Yaw=Rz
Flight_Throttle=
Flight_CameraPitch=POV_U1
Flight_CameraPitch=POV_D1:R
Flight_CameraYaw=POV_L1
Flight_CameraYaw=POV_R1:R
UI_B=Button3
UI_A=Button1
UI_X=Button4
UI_Y=Button2
UI_LB=
UI_RB=
UI_LT=Z
UI_RT=Z
UI_LeftStickPress=
UI_RightStickPress=
UI_DPadUp=POV_U1
UI_DPadDown=POV_D1
UI_DPadLeft=POV_L1
UI_DPadRight=POV_R1
UI_LeftStickUp=Y:N
UI_LeftStickDown=Y:P
UI_LeftStickLeft=X:N
UI_LeftStickRight=X:P
UI_RightStickUp=
UI_RightStickDown=
UI_RightStickLeft=
UI_RightStickRight=
UI_Menu=Button13

[Joystick-B687044F-0000-0000-0000-504944564944]
ProductName=TWCS Throttle
Flight_Gun=
Flight_Missile=
Flight_Weapon=
Flight_Target=
Flight_Radar=Button2
Flight_Flare=Button1
Flight_View=Button6
Flight_AccelerationDeceleration=Button5
Flight_AutoPilot=Button3
Flight_Pause=
Flight_HatSwitchUp=POV_U1
Flight_HatSwitchDown=POV_D1
Flight_HatSwitchLeft=POV_L1
Flight_HatSwitchRight=POV_R1
Flight_Pitch=
Flight_Roll=
Flight_Yaw=Rz
Flight_Yaw=Slider2
Flight_Throttle=Z
Flight_CameraPitch=Y
Flight_CameraYaw=X
UI_B=
UI_A=
UI_X=
UI_Y=
UI_LB=
UI_RB=
UI_LT=
UI_RT=
UI_LeftStickPress=
UI_RightStickPress=
UI_DPadUp=POV_U1
UI_DPadDown=POV_D1
UI_DPadLeft=POV_L1
UI_DPadRight=POV_R1
UI_LeftStickUp=Y:N
UI_LeftStickDown=Y:P
UI_LeftStickLeft=X:N
UI_LeftStickRight=X:P
UI_RightStickUp=
UI_RightStickDown=
UI_RightStickLeft=
UI_RightStickRight=
UI_Menu=

Thank you man for this config. It works great.
#10
deathspeed Jan 9, 2021 @ 6:24pm 
Here is a guide I wrote that uses this method.

https://steamcommunity.com/sharedfiles/filedetails/?id=2210570616
#11
Ravvij Jan 31, 2021 @ 1:49pm 
So, got an issue. I'm using a TM 16.000M HOTAS and I'm having a problem with the throttle's output in game not being a 1 for 1 of what my throttle is at.

Throttle to In-Game:
0% throttle = 0% Output
100% throttle = 100% Output

Any values in between "OFF / 0" and "FULL / 100" are almost variable. I want to force it to use absolute outputs based on a linear curve. So 25% Z (throttle) actually equals 25% output in-game. Is there a way to add code to the output in the "input.ini" to fix this? Or, do I need to edit a different file?
#12
Maverick May 21, 2022 @ 9:18am 
Originally posted by Ravvij:
So, got an issue. I'm using a TM 16.000M HOTAS and I'm having a problem with the throttle's output in game not being a 1 for 1 of what my throttle is at.

Throttle to In-Game:
0% throttle = 0% Output
100% throttle = 100% Output

Any values in between "OFF / 0" and "FULL / 100" are almost variable. I want to force it to use absolute outputs based on a linear curve. So 25% Z (throttle) actually equals 25% output in-game. Is there a way to add code to the output in the "input.ini" to fix this? Or, do I need to edit a different file?

You need to make sure that the joystick's Flight_Throttle assigned line is blank. The game averages the two inputs together if you have both joystick and throttle Flight_Throttle= set to something. So only the TWCS Flight_Throttle should be set to Z.
Last edited by Maverick; May 21, 2022 @ 2:17pm
#13
Reckless Racoon Mar 13, 2024 @ 3:22pm 
THIS is what allowed me to play - thanks so much!
#14
< >
Showing 1-14 of 14 comments
Per page: 1530 50

ACE COMBAT™7: SKIES UNKNOWN > General Discussions > Topic Details
Date Posted: May 27, 2019 @ 2:41am
Posts: 14

Discussions Rules and Guidelines