GUIDE Call of Duty: WW2 SLI fix / SLI Bits

[DasRegal]

Hello,
after a bunch of testing this is the best SLI profile for now:

Open your COD WW2 Profile with Profile inspector and edit the following settings:
Ambient Occlusion compatibility 0x00000004 (cod4)
SLI compatibility bits (DX10+11) 0x080020F5
Number of GPUs to use on SLI 0x00000002 (or 3 if your running triple sli)
Predefined GPUs DX10 0x00000002 (or 3 if your running triple sli)
Predifined SLI mode DX10 0x00000002
0x70F8E408 change to 0x00000009 (The Witcher 3) //look under Unknown

GPU usage is around 90% and there are no artifacts/flickering/buggy shadows.
Tested on Titan Black SLI (5120x2160 native resolution maxed out settings 60-70 FPS)

Important tips:
1. Temporal AA will lead to flickering. Only use FXAA or SMAA 1X to smoothen the picture
2. Use Nvidia DSR to downsample the resolution. Do not use ingame resolution scaling. It will lead to a lower GPU usage and there for a performance loss

The test: [Default SLI = AFR combined with 0x080000F1 (cod AW)]
Scene 1:
http://www.directupload. net/file/d/4896/736nqu6y_jpg.htm
Single GPU: 45fps

http://www.directupload. net/file/d/4896/rd7foksv_jpg.htm
Default SLI: 65fps (44%increase)

http://www.directupload. net/file/d/4896/h3bxoart_jpg.htm
SLI Fix: 77fps (71%increase)

Scene 2:
http://www.directupload. net/file/d/4896/hr3r7jen_jpg.htm
Single GPU: 32fps

http://www.directupload. net/file/d/4896/66qu4tby_jpg.htm
Default SLI: 46fps (43%increase)

http://www.directupload. net/file/d/4896/upwd7nn7_jpg.htm
SLI Fix: 57fps (78%increase)

Scene 3:
http://www.directupload. net/file/d/4896/26nbnx88_jpg.htm
Single GPU: 39fps

http://www.directupload. net/file/d/4896/xmeu262x_jpg.htm
Default SLI: 50fps (28%increase)

http://www.directupload. net/file/d/4896/sgholfjc_jpg.htm
SLI Fix: 65fps (67%increase)

[Team Triss]

As someone who used to SLI, boy am I happy about buying a single 980Ti and just having a single card.

But I also remember what it was like when it didn't work right out of the box, so thanks for putting in the time to play with the driver settings.

[KillingYourNumber]

Does it work better than manually setting AFR 2 in Nvidia Control Panel?

[MKS]

The problem is no performance gain in 1080Ti SLI

[Sym]

Thanks for sharing man, but I tried setting the values as you said and couldn't figure out where to put the last one (0x70F8E408 to 0x00000009); trying to start the game with just the first 4 values results in buggy rendering all over the place.

Would you mind specifying where to set that value?

EDIT: ok, I'm probably retarded. Just took a closer look and found it.

Performances are great, but still, there's something fishy about how the game is rendered.

[-l- Bathory -l-]

where do you put this value? the last one I cannot find it

0x70F8E408 change to 0x00000009 (The Witcher 3)

[heavyRain]

Originally posted by Billmi40:

where do you put this value? the last one I cannot find it

0x70F8E408 change to 0x00000009 (The Witcher 3)

same problem

[Alias]

Originally posted by HeavyRainnn:

Originally posted by Billmi40:

where do you put this value? the last one I cannot find it

0x70F8E408 change to 0x00000009 (The Witcher 3)

same problem

Bottom of the page there is a line with 0x70F8E408 where you have to change it's value to 0x00000009

[heavyRain]

Originally posted by Alias:

Originally posted by HeavyRainnn:

same problem

Bottom of the page there is a line with 0x70F8E408 where you have to change it's value to 0x00000009

ty m8

[DasRegal]

Originally posted by BOMBZz:

Does it work better than manually setting AFR 2 in Nvidia Control Panel?

Yes, I've made a comparison on the first post.

Originally posted by silentmarket:

The problem is no performance gain in 1080Ti SLI

Maybe you are running into the cpu limit. Two 1080ti's is overkill unless you game at 8K.

Originally posted by furryousSym:

Thanks for sharing man, but I tried setting the values as you said and couldn't figure out where to put the last one (0x70F8E408 to 0x00000009); trying to start the game with just the first 4 values results in buggy rendering all over the place.

Would you mind specifying where to set that value?

EDIT: ok, I'm probably retarded. Just took a closer look and found it.

Performances are great, but still, there's something fishy about how the game is rendered.

You probably have AA activated. TXAA is buggy on the profile. Use DSR instead. =)
I swear I have no glitches what so ever.

[DasRegal]

Updated the guide.

[KillingYourNumber]

Originally posted by DasRegal:

Updated the guide.

link doesnt work

[DasRegal]

Originally posted by BOMBZz:

Originally posted by DasRegal:

Updated the guide.

link doesnt work

For the screenshots? Just remove the space between the dot and the net. Otherwise Steam removes the links.

[stalkman]

Can COnfirm,the fix works.Still unoptimized fix but it does the trick.no more flickering in game.FPS varies from 65-100 LOL . im running 2x 1070. Thanks again.

[hyp36rmax]

Default profile actually works better for me. SLI GTX 1080Ti's FTW3 7680x1440P @144hz with 388.13 Drivers. This fix brought my performance down to a choppy 60-70 FPS comprared to 90-100 FPS. YMMV and glad to see this working for others.

[DasRegal]

Originally posted by stalkman ♥♥♥♥♥♥♥♥♥.com:

Can COnfirm,the fix works.Still unoptimized fix but it does the trick.no more flickering in game.FPS varies from 65-100 LOL . im running 2x 1070. Thanks again.

Yeah, scaling wise it is not perfect. For example the BF4 compatibility bits give 100% scaling...but also extreme flickering. I hate Nvidia for not caring anymore about their enthusiast customers.

Originally posted by hyp36rmax:

Default profile actually works better for me. SLI GTX 1080Ti's FTW3 7680x1440P @144hz with 388.13 Drivers. This fix brought my performance down to a choppy 60-70 FPS comprared to 90-100 FPS. YMMV and glad to see this working for others.

Interesting. Not sure why it's not working for you. Thanks for your feedback.