Washroom Loop Not Working

[LivinFusionz]

I'm setting up my Washroom Loop ie sink lavatory and showers however when i've pumped the clean water into the loop the lavatories are stuck on empty pipes and the water sieve is stuck on blocked pipe (which i'm assuming is that ive cut that loop off for now. This is the state of my loop currently https://gyazo.com/04f119c21f96194534b4f4f8c4460ed4.

Any help or known bug please help as it's basically stopping my progress without sticking to the old outhouses

[JadeFalcon]

it looks like you have the clean water coming from the pump from the left and from the sieve into the same line but moving in opposite directions. Also the line coming in from the pump on the left run it underneath the input points of the sinks and toilets and up instead of directly across them all it seems to work better that way.

[LivinFusionz]

Originally posted by JadeFalcon:

it looks like you have the clean water coming from the pump from the left and from the sieve into the same line but moving in opposite directions. Also the line coming in from the pump on the left run it underneath the input points of the sinks and toilets and up instead of directly across them all it seems to work better that way.

Thanks so i've done this for now however the Water Sieve is still stating pipe blocked not sure if its waiting for the excess to clear through
https://gyazo.com/fb1160bc34b3d0991e91a1a2f32edda5

[LivinFusionz]

Nvm all sorted now, when i was rebuilding the sieve a few times i forgot to rotate it so all works thanks for the assist :)

[JadeFalcon]

Oh I didnt catch this on the first one but it looks like you also have the inlet pipe on the sieve going into the inlet of the carbon skimmer it should be polluted going into the sieve then the clean going into the carbon skimmer from the green outlet of the sieve,

[Chogathmainop]

Originally posted by LivinFusionz:

Thanks so i've done this for now however the Water Sieve is still stating pipe blocked not sure if its waiting for the excess to clear through
https://gyazo.com/fb1160bc34b3d0991e91a1a2f32edda5

The first reason is that your pipe isn't connected to your liquid pump. Once you've fixed that, you might want to look into the pipe running under the bedroom platform - I have no idea where it's going.

[fractalgem]

Ok, here's the REAL problem:
The output of the water seive CANNOT get to the the bathrooms. It cannot flow backwards through a bridge. Remove ALL those liquid bridges next to it because they're just confusing you at this point, then connect the water seive output DIRECTLY to the bathroom inputs, and loop the bathroom output way around to go into the input.

Move the electrolyzer elsewhere.

If that's a carbon skimmer, not an electrolyzer, i still recommend moving it elsewhere and giving it a separate water seive, just to clean up the bathroom piping.

[fractalgem]

Originally posted by LivinFusionz:

Nvm all sorted now, when i was rebuilding the sieve a few times i forgot to rotate it so all works thanks for the assist :)

Ohhhh you intended to rotate it. that would probably work much better, yes hahah!