Loading the Shaker

[Muskrat2k9]

Ok, SO I must be doing something wrong... I have a tier 3 setup at The first claim, old arnolds I think. But when I go to dump dirt in to the shaker, I can not dump the dirt all out cause I can not tip the bucket enough or it gets stuck, What am doing wrong and what can I do diffrently?

[farmer]

make sure you raise the boom al the way up and tip bucket couple of times it's good good for me

[jeff1963]

It works but it takes a little finagling to get it all in, River Town has a little better angle for the Front Loader.

[Ankua]

Drive up to the dump spot far right as possible..Tires pressed to washplant..I use the parking brake at this time..Make sure the arm is high as it will go.. I use a controller so here it is in that form.. Lower bucket arms about a half inch..Then angle the bucket down using B key. If it isn't dumping.. lower arms agian a quarter inch and the bucket should angle down enough to dump.

Now use the Y key to angle the blade back high enough over the shaker before making any other move.Like backing up..You should not get caught or stuck...If you do go forward and worm the maching left and right as you lift and angle the blade upwards to get off...Movement in forward or reverse makes the machine greasy to get off those tough spots.

[Mavs]

Maybe this will help. If not it seems like a new loader will do the job.

https://youtu.be/j3mdXkuTITM

[Muskrat2k9]

Thank you all. Apparently it was a bugged front loader and I needed to get anouther one. Its working now. Good thing, Thought I was going nuts! :>) Again thank you for your responses!