sli profile

[halal tekken]

currently ass for me running gtx 980's in sli

let's try to find a working sli bit with nvidia inspector

[Eva Kizo]

I'm getting 100+ on my 980s... I guess that's not fantastic considering

[Sur_GalaHad]

sli works pretty great in this game..... whats your issue?

[MaJiK NiNjA]

Originally posted by UUDDLRLRBA:

sli works pretty great in this game..... whats your issue?

processor?



also it says you do not own the game DOOM downloaded copys can be junkie.

[FeryCZ]

I have 770 4gb in SLI and running in ultra 2560x1440 perfectly!

[halal tekken]

Originally posted by UUDDLRLRBA:

sli works pretty great in this game..... whats your issue?

very low fps i'll reinstall drivers

my processor is i7 4770k

[MaJiK NiNjA]

Originally posted by Kogyaru:

Originally posted by UUDDLRLRBA:

sli works pretty great in this game..... whats your issue?

very low fps i'll reinstall drivers

my processor is i7 4770k

that processor is holding back the full potential of a SLI setup because it only has 16 PCI-E lanes meaning you can only run 2 cards @ 8x / 8x and IF you have anything else like a soundcard ect that also takes up some lanes so it would knock 1 of the 2 cards down to 4x. other then that man idk when i played beta i did not have any issues with it.

[sk0tch]

About 40fps@1600p. Have 3x GTX Titan SLI, but judging from MSI Afterburner - SLI doesnt work.

[Nemesis]

Originally posted by MaJiK NiNjA:

Originally posted by Kogyaru:

very low fps i'll reinstall drivers

my processor is i7 4770k

that processor is holding back the full potential of a SLI setup because it only has 16 PCI-E lanes meaning you can only run 2 cards @ 8x / 8x and IF you have anything else like a soundcard ect that also takes up some lanes so it would knock 1 of the 2 cards down to 4x. other then that man idk when i played beta i did not have any issues with it.

Don't listen to this guy his full of ♥♥♥♥ your cards will not be running at 4x pcie with a soundcard installed.

[NicoZ]

A dev on twitter said something about this though
https://twitter.com/idSoftwareTiago/status/731018336847306752

Tried AFR and AFR but I get flickering glitch

[danielscaf]

SLI is not available with 365.19 driver, one GTX 980 gets solid 80 fps@144Hz with 99% usage ,the other one is idle 0% usage according to msi afterburner, i'm not sure but I think that the engine does'nt support SLI

[Dorota]

I downloaded the newest Nvidia inspector. I opened "nvidiaProfieInspector" (you'll find it inside the nvidiaInspector folder). In "Profiles" I chose "Doom" profile. I changed "Sli compability bits" to "The Witcher 2" or "Mad Max 3". That made my sec graphic card to work at 46-50% load. It's not optimale, but it did work for me. Good luck!

[Dorota]

The newest NVIDIA Inspector ver. is: 1.9.7.6

[trak49]

Using HWMonitor, both my GPUs are running at 90+ percent in game. Latest Nvidia driver ver. 365.19 and I have not tweaked anything.

running @ 7560x1440 with everything maxed out and FOV @ 120. FPS varies usually 60 but does dip to 35-40 in intense situations.

I7 6700k oc to 4.6
Corsair H110GTX CPU Liquid Cooler
Gigabyte GA-Z170X-Gaming G1 (rev. 1.0)
GTX 980 Ti Gigabyte G1 Gaming 6GB Edition SLI (x2)
G.SKILL Ripjaws V Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200
Qnix 2710 Monitors (x3)
Res: 7680x1440

BTW: This board runs two SLI slots at 16x and will run four at 8x.

[O1]

Originally posted by trak49:

Using HWMonitor, both my GPUs are running at 90+ percent in game. Latest Nvidia driver ver. 365.19 and I have not tweaked anything.

running @ 7560x1440 with everything maxed out and FOV @ 120. FPS varies usually 60 but does dip to 35-40 in intense situations.

I7 6700k oc to 4.6
Corsair H110GTX CPU Liquid Cooler
Gigabyte GA-Z170X-Gaming G1 (rev. 1.0)
GTX 980 Ti Gigabyte G1 Gaming 6GB Edition SLI (x2)
G.SKILL Ripjaws V Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200
Qnix 2710 Monitors (x3)
Res: 7680x1440

BTW: This board runs two SLI slots at 16x and will run four at 8x.

SLi was working for me last night prior to updating to new driver. You're able to get 90% from your 2 GPUs after the new driver?

[VultureX]

Originally posted by O1:

SLi was working for me last night prior to updating to new driver. You're able to get 90% from your 2 GPUs after the new driver?

Same.
I force AFR2 through the control panel with the new drivers and got a decent but not very high increase in performance. Sometimes I see flickering.