Steam Link Hardware Patch Notes :: Steam Link Algemene discussies

Winkelpagina

Steam Link

Alles Discussies Beeldmateriaal Video's Nieuws Gidsen Recensies

Steam Link > Algemene discussies > Details van topic

Dit topic is vastgepind, dus het is waarschijnlijk belangrijk

slouken

17 dec 2021 om 15:54

Steam Link Hardware Patch Notes

This thread contains patch notes for the Steam Link hardware.

< >

1-6 van 6 reacties weergegeven

slouken

17 dec 2021 om 15:54

Changes in build 388:

Greatly improved audio latency
Increased the maximum bitrate on wireless networks to match wired networks
Temporarily disabled estimated bandwidth calculation and automatic bitrate tuning
Temporarily reduced default resolution on wireless networks to 1600x900. This fixes audio crackling on good wireless networks and can be adjusted in the advanced streaming client settings before starting to stream.
Added UI to adjust the delay before the Steam Link goes to sleep
Added UI to opt in and out of the Steam Link beta firmware
Fixed Dual Shock 4 Bluetooth controller pairing
Moving the mouse will no longer wake the Steam Link
Fixed buzzing sound after a background system update

Changes in build 390:

Re-enabled bandwidth estimation for better performance on wireless networks

Changes in build 398:

Re-enabled 1080p streaming on wireless networks
Increased "Beautiful" settings bitrate to 30 Mbit/s, wireless networks should use "Balanced" or "Fast" settings if this causes problems
Fixed audio latency and crackling on most wireless networks
Fixed issue with XBox 360 wireless controllers being unable to wake Steam Link
Fixed pairing with Wii-U controllers (re-pairing in the Bluetooth menu is necessary)
Fixed issue where Steam Link would go to sleep immediately on some CEC TVs
Fixed black screen at boot for some HDMI receivers and are continuing to work on this issue for others

Laatst bewerkt door slouken; 17 dec 2021 om 15:59

slouken

17 dec 2021 om 15:55

Changes in build 400:

Added experimental support for sharing a single USB device with the remote computer, using VirtualHere, which can be enabled in the system settings.

Changes in build 406:

Fixed black screen after the boot logo on some TVs and AV receivers
Fixed D-pad functionality on wireless XBox 360 controllers
Added support for some third party XBox One wired controllers
Fixed WiFi not working correctly after system reset
Added additional logging to track down WiFi timeout and driver failure issues
Fixed packet loss and additional latency when connected to Gigabit networks
Added advanced streaming option not to stream audio from the remote computer (requires Steam client dated 12/8 or newer)
Added advanced streaming option not to send input to the remote computer
Added experimental support for sharing a single USB device with the remote computer, using VirtualHere, which can be enabled in the system settings.

Changes in build 410:

Disabled burst bitrate limiting to isolate whether it is causing stuttering for some customers

Changes in build 412:

Updated HDMI startup sequence to avoid black display after boot logo on more TVs and AV receivers
Added the ability to lock the firmware to a specific build by putting that build number in a file on a USB drive at \steamlink\config\system\update_branch.txt, inserting it into the Steam Link and then power cycling the Steam Link

Changes in build 414:

Enabled 32-bit CRC checking to detect corrupt network packets

Changes in build 430:

Updated WiFi driver from Marvell
Improved firmware update speed for future updates

Changes in build 433:

Fixed occasional sound hitch while streaming

Changes in build 435:

Fixed menu audio latency regression in build 433

Changes in build 437:

Added audio settings panel (in preparation for future 5.1 surround support)
Set the name of the device to "Steam Link" in TV source menus

Changes in build 441:

Stabilized HDMI signal during boot, which may help some systems that show black screen after boot.
Added an option to save debug logs from the system settings panel

Changes in build 447:

Re-enabled burst bitrate limiting to fix packet loss on Gigabit networks
VirtualHere support has been improved with an optimized build
Added support for Steam Link apps, built with a forthcoming SDK

Changes in build 449:

Added the ability to force 720p output by putting the word 720p in a file on a USB drive at \steamlink\config\system\display_resolution.txt, inserting it into the Steam Link and then power cycling the Steam Link

Changes for build 456:

Fixed Steam Controller config customization with the latest Steam beta client
Added the ability to "forget" a wireless network in advanced network settings
Put the factory reset option back in the system settings

Changes in build 462:

Fixed regression pairing Steam Controllers directly with Steam Link (holding down X while powering on the controller when the Steam Link is prompting to connect a controller)
Added support for Logitech racing wheels using the beta VirtualHere feature
Updated recovery image

Changes in build 484:

Added low latency audio and video APIs for native development

Changes in build 487:

Updated WiFi driver from Marvell to resolve dropped wireless connections while streaming
Added initial support for audio output to USB headsets
Logitech racing wheels no longer show up as XInput devices when streaming

Changes in build 494:

Fixed garbled 5.1 audio after several hours of play
Fixed blank display after boot on some AV receivers and projectors
Fixed an issue with wired Steam Controllers occasionally keeping the right pad in mouse mode

Changes in build 497:

Added display information to the display settings panel
Fixed a regression causing update and factory reset failure if the resolution has been overridden.

Changes in build 499:

Fixed a memory leak causing Steam to crash on the host after a while
Added support for various Mad Catz fightsticks for Street Fighter V

slouken

17 dec 2021 om 15:55

Changes in build 503:

Added support for a network test with new Steam clients
Added dynamic MTU discovery with new Steam clients
Increased receive buffer size to reduce dropped packets on wireless networks
Cleanly disconnect from wireless networks when restarting for updates
Added boot logs to the debug logs uploaded from the system settings
Fixed potential audio corruption in the Steam Link main menu
VirtualHere is automatically enabled while streaming while opted into the beta, allowing connections of up to 1 device.

Changes in build 507:

Added display settings configuration to the out of box experience
The TV is only turned on in response to input
Wireless 360 controllers are turned off when going to sleep
Fixed host memory corruption when turning on performance graph

Changes in build 513:

Reduced audio latency for USB headsets
Added support for Bluetooth audio headsets (output only)
Added support for the PowerA Mini XBox One wired controller
Added support for the PDP Afterglow XBox One wired controller
Enabled USB suspend for mice and keyboards when Steam Link goes to sleep
Added restore logic for a corrupt recovery image

Changes in build 515:

Fixed several bluetooth pairing issues
Fixed several bluetooth audio interoperability issues
Fixed some audio devices not showing up in the bluetooth screen
Disconnect bluetooth devices when going into sleep mode
Logitech F710 can now be used to wake the system up
Fixed bug causing the TV to power on after a silent update

Changes in build 516:

Fixed Steam Link menu UI showing up while stream is in progress

Changes in build 517:

to 5 GHz wireless networks

Changes in build 518:

VirtualHere have completed their beta test and have released their product on the Steam Store
Fixed USB audio output when waking from sleep
Fixed performance issues when using USB audio output with 5.1 surround HDMI setup
Fixed issues connecting to Bluetooth LE devices
Added support for multiple partitions on USB thumb drives

Changes in build 522:

Added support for spectating Steam VR games running on the Steam beta client
Greatly reduced wake time coming back from low power mode
Steam Controller and XBox Controllers wake the Steam Link by pressing the center guide button to wake the controller
Updated Steam Link hostname to uniquely identify multiple Steam Links on the network

Changes in build 524:

Switched default audio to stereo to avoid compatibility issues
Fixed regression causing 5.1 surround sound to be used even if stereo was selected
Fixed XBox controllers occasionally not working after wake
Fixed issue with unpaired bluetooth devices waking the Steam Link
Fixed issue with updates not downloading while the Steam Link is in low power mode

Changes in build 528:

Added support for the USB wired XBox One S controller
Added support for connecting the XBox One S controller via Bluetooth, once the controller has been updated to firmware revision 3.1.1215.0. The center XBox button is not functional in Bluetooth mode.
Added logic to detect when Steam has been reinstalled on the host computer and replace the old entry on the Steam Link main menu. More work will be done in the future to catch some edge cases here.

Changes in build 532:

Fixed issue where the PS4 gyro would wake the Steam Link

Changes in build 538:

Fixed a cause of streaming audio being gradually delayed over time
Fixed system hang when the Logitech G920 racing wheel is plugged in
Added support for the Thrustmaster T150 racing wheel using VirtualHere
Improved the algorithm for linking host computers to existing entries in the main menu when Steam has been reinstalled
Apps are now installed in /home/apps with 1 Gigabyte of storage available
Apps can be installed by packing them in zip or tar.gz archives and placing them in the steamlink\apps folder of a USB drive
The Kodi SDK example now supports hardware accelerated video playback

Changes in build 540:

Fixed bug causing audio to mute during the streaming session

Changes in build 546:

Added support for the DS4 Slim controller, model CUH-ZCT2U
Added an option to stream the desktop when connecting, in the advanced streaming settings
Added support for specifying a network proxy in the advanced network settings
Automatically configure the date and time, as well as timezone, when starting up
Use ALSA instead of Pulseaudio for USB headsets, improving performance and reducing latency

Changes in build 550:

Added volume settings for external USB and Bluetooth headsets
Fixed regression in 5.1 audio output to USB headsets
Added rumble support for the DS4 Slim controller, model CUH-ZCT2U
Fixed kernel crash when using the XBox One Elite controller

Changes in build 554:

Fixed audio crackling in the main menu
Added support for pairing PS3 controllers for wireless use (must pair over USB cable by pressing the PS button)

Changes in build 560:

Allow pairing with the XBox One S controller updated to the latest firmware version, 3.1.1221.0
Added support for full Steam Controller personalization when connected to the latest Steam beta client
Added support for full PS4 controller personalization when connected to the latest Steam beta client
Use HDMI audio output when the PS4 slim controller is plugged in
Fixed HDMI audio buzzing after waking the Steam Link with a USB headset connected
Fixed issue with some Bluetooth devices waking the Steam Link immediately after going to sleep
Updated VirtualHere with performance optimizations

Changes in build 562:

Added support for personalization of PS4 controllers connected via Bluetooth
Added support for the DS4 Wireless USB Adapter
Added support for the OUYA controller

Changes in build 564:

Added mouse sensitivity settings
Added support for the Nostromo n45 Dual Analog Gamepad
Fixed loading controller mappings from /etc/controller_map.txt
Fixed offset video in the MAME4ALL app

Changes in build 565:

Added support for the DragonRise Inc. Generic USB Joystick
Fixed apps crashing at startup

Changes in build 566:

You can now turn on the performance graph with Options+Triangle when using the PS4 controller with Steam configurator support enabled in Big Picture
Fixed turning on the Steam Link with the Logitech F310 controller
Show an error message if the static IP configuration isn't completely filled out
Upgraded VirtualHere support to version 3.1.8

Changes in build 572:

Disabled Bluetooth headsets by default, because of performance issues
Added audio settings to change output (allowing use of Bluetooth headsets and PS4 controller headphone jack when it's plugged in via USB)
Added controller settings to setup third party game controllers
Automatically re-pair with Bluetooth devices that have been paired before and are put back in pairing mode while on the Bluetooth or connect input screens
Added support for the XiaoMi Bluetooth controller (??????)
Stopped waking when USB devices are unplugged
You can add the USB VID/PID of devices that don't wake the Steam Link by putting them in the file \steamlink\config\system\usb_blacklist.txt on a USB drive, inserting it in the Steam Link and power cycling it. The lines are in the form VID,PID, e.g. 0x2378, 0x1008
Fixed re-connecting to a network via WPS
Increased the timeout for WiFi password entry to 5 minutes
Increased the Wake On LAN wait time to 5 minutes

Changes in build 574:

Upgraded to BlueZ 5.43 for improved Bluetooth device compatibility
Automatically pair with the PS4 controller when it's plugged in via USB
Fixed pairing with the Microsoft Foldable Keyboard
Fixed delay on button presses when using the Steam Controller with local apps
Fixed occasional difficulty connecting to wireless networks

Changes in build 575:

Added an option to disable video streaming in the advanced streaming settings
Added an option to reset advanced streaming settings to default
Added support for using the Logitech G920 racing wheel with VirtualHere
Fixed a cause of the PS3 controller being unable to connect wirelessly
Fixed Wake On LAN timing out early in some circumstances

Changes in build 578:

Added support for entering a PIN code to start streaming
Improved controller mapping UI to support more third party controllers
Added support for the Mayflash GameCube controller adapter
Added support for some third party SNES controllers
The Steam Link no longer wakes up when plugging in non-sound / non-input devices

Changes in build 581:

Made it possible to cancel the controller mapping UI
The controller mapping UI comes up if you connect an unknown Bluetooth controller
Added support for the 8Bitdo NES30 Pro and iBuffalo SNES Controller
Switched the default Wii U Pro Controller button mapping to match the physical layout of a Steam Controller

Changes in build 582:

Implemented support for rumble over Bluetooth with the XBox One S controller

Changes in build 584:

Fixed increasing audio latency when the remote computer is sending audio faster than expected
Implemented rumble support for the XiaoMi Bluetooth controller
Prompt the user to put their Bluetooth controller in discoverable mode if the controller thinks it's paired with the Steam Link but the pairing has been removed (or factory reset)

Changes in build 585:

Fixed occasional problem with Bluetooth no longer scanning on the Bluetooth settings panel.

Changes in build 587:

Fixed timeout connecting to the remote computer when Big Picture starts slowly
Updated streaming audio to opus 1.1.4 for a small performance improvement

Changes in build 589:

Fixed sharing the Thrustmaster TX with the remote computer using VirtualHere
Fixed using the PS4 controller locally after sharing it with the remote computer using VirtualHere

Changes in build 597:

Upgraded Qt to version 5.8.0 and now the complete runtime environment is available for native applications

Laatst bewerkt door slouken; 17 dec 2021 om 16:00

slouken

17 dec 2021 om 15:56

Changes in build 600:

The HDMI port is powered down when the Steam Link goes to sleep, and should have better compatibility with CEC enabled TVs
Steam Controller right pad and triggers act as a mouse for native applications

Changes in build 606:

Improved performance for Bluetooth audio
Added support for the Razer Wildcat controller

Changes in build 607:

Experimental change to reduce latency and frame stuttering
Fixed reset on wake when connected to a Sharp TV
Added support for the wired Power A controller (thanks to Thomas L)
Fixed hang when unplugging USB headset

Changes in build 609:

Fixed issue with the XBox 360 wireless controller not waking the Steam Link
Fixed rare continual crash when connecting to the local network
Fixed occasional audio dropout on the main menu after waking

Changes in build 610:

Saving debug logs also saves them to a USB thumb drive in steamlink\logs, if connected
Increased initialization speed of wireless Steam Controllers when starting Big Picture on the remote computer
A native app's home directory is saved and restored when reinstalling it

Changes in build 613:

Fixed regression causing unexpected latency when connected to WiFi
Added display options to change resolutions and enable/disable CEC support
Switch the TV to the Steam Link when a button is pressed, if CEC is enabled
Added support for the Nintendo Switch Pro Controller
Added support for the Cyborg V.3 Rumble Pad and the Mad Catz FightPad PRO
Updated VirtualHere server to version 3.2.9

Changes in build 614:

Backed out latency reduction and frame smoothing change to see if that fixes reports of wireless packet loss and frame freezing
Improved robustness of CEC support

Changes in build 615:

Fixed regression in CEC support if the setting hadn't been modified
A One Touch Play message is sent to the TV if a button is pressed on the controller after 5 minutes of inactivity
Fixed starting stream after the network test on the very first connection

Changes in build 617:

Added the ability to stream from a specific computer, not on the local network (streaming over the Internet is not officially supported)
Always use the Ethernet network when it's plugged in

Changes in build 620:

Fixed bricked units caused by scratch partition filling up with log files

Changes in build 623:

Added better UI when ethernet is plugged in
Fixed regression in WiFi coming back online when waking from low power mode
Added streaming setting to specify whether to connect to 2.4 GHz or 5 GHz networks or both
Added error message if you check for updates and the Steam Link can't contact the update server

Changes in build 624:

Added missing localized strings for several languages
Fixed Bluetooth no longer working after wake from low power mode

Changes in build 626:

Added experimental microphone support which can be enabled in the Steam Link audio settings (requires Steam beta client dated July 26 or newer running on Windows 10)

Changes in build 628:

Enabled HFP support for Bluetooth headsets
Fixed rare crash in Bluetooth settings

Changes in build 630:

Added support for more third party Xbox controllers
Updated Qt to version 5.9.1
Added root certificates for HTTPS web view support

Changes in build 637:

Updated Xbox controller driver to the latest Linux kernel release
Fixed issue being unable to use controller after mapping buttons
Made it possible to skip network setup at startup

Changes in build 639:

Fixed Blueborne Bluetooth security vulnerability
Updated VirtualHere to version 3.4.3 with improved performance over WiFi

Changes in build 640:

Fixed sending controller serial numbers to Steam

Changes in build 644:

Added support for some third party PS3 wired controllers
Security update to prevent the WiFi KRACK attack
Use MD5 instead of DES for passwords, fixing CVE-2017-17878
IPv6 is turned off, fixing CVE-2017-17877
Updated VirtualHere to version 3.4.5

Changes in build 645:

Fixed regression in controller support while streaming

Changes in build 646:

Reverted recent changes in Xbox and PS3 controller drivers

Changes in build 648:

Fixed regression using some third party Xbox One controllers

Changes in build 651:

Enabled Steam Controller support in native applications

Changes in build 653:

Added the ability to change Xbox controller drivers in the System Settings (the modern driver is recommended for Xbox One controllers)
Added support for the GameSir G3w controller
Native applications can turn off Steam Controller mouse mode by setting the environment variable SDL_ENABLE_STEAM_CONTROLLER_MOUSE_MODE=0 before initializing SDL

Changes in build 655:

Added streaming support for the new Nintendo Switch Pro Controller configuration support in the latest Steam client beta.

Changes in build 656:

The controller test UI can be cancelled by double-tapping B

Changes in build 661:

Updated VirtualHere to version 3.6.6 with slight performance improvements
Restored European Portuguese localization

Changes in build 664:

Fixed lockup after 10 minutes of streaming
Added predefined controller mappings for over a hundred different controllers

Changes in build 667:

Fixed regression with Xbox controllers in the modern Xbox driver
Smoothed and reduced audio dropouts

Changes in build 669:

Fixed regression causing long rumble vibrations

Changes in build 672:

Fixed spurious input from some PS3 controllers

Changes in build 673:

Fixed regression causing audio and video frame stutters and drops on busy networks

Changes in build 678:

Added IPv6 kernel modules (not enabled by default)

Changes in build 679:

Added IPv6 netfilter modules (not enabled by default)

Changes in build 680:

Added Latin American Spanish and Vietnamese language options
Added support for the upcoming Razer Raiju Mobile (wired)
Re-enabled streaming from Mac OS X Mojave (requires upcoming Steam Client update)

Changes in build 682:

Updated Latin American Spanish localization

Changes in build 683:

Fixed regression detecting wireless Steam Controllers

Changes in build 688:

Added support for Steam Link Anywhere

Changes in build 689:

Fixed mouse sensitivity when connecting to the most recent Steam client

Changes in build 692:

Fixed mouse jumping when the cursor is hidden
Fixed stuck green screen when launching SCS Software Truck Simulator games

Changes in build 693:

Added the device form factor for an upcoming Steamworks API

Changes in build 694:

Added option to disable performance icons in advanced streaming settings

Changes in build 695:

Fixed performance regression on WiFi networks

Changes in build 698:

Checking for computer status is now more responsive
Added a loading screen while the connection is being established
Fixed network warning icons never going away
Show the red network icon when we stop receiving video from the host
Steam Link Anywhere now runs over the Steam Datagram Relay network, which ensures that the best route over the Valve backbone is always used.

Changes in build 699:

Improved support for Xbox One wired controllers
Fixed support for Nintendo Switch Pro wired controllers
Added support for various third party Nintendo Switch Pro wired controllers
Nintendo Switch Pro controllers use buttons as they are labeled (e.g. the right face button is A) to match the Steam default configuration
Added support for the BDA PS4 Fightpad

slouken

17 dec 2021 om 15:56

Changes in build 701:

Fixed regression with the Xbox One S controller in Bluetooth mode

Changes in build 703:

Added support for the Xbox One Elite Series 2 controller in wired mode

Changes in build 706:

Added support for the PDP Battlefield One controller
Added support for the NVIDIA Controller v01.04
Added support for the MOGA XP5-A Plus controller

Changes in build 707:

Added controller tip screen when the guide button is used as a chord to emulate missing controller functionality
Use PlayStation controller button images when a PS3 or PS4 controller is connected
Added support for the PDP Versus Fighting Pad for PS3

Changes in build 709:

Fixed DragonRise Generic USB PCB showing up as a PS3 controller

Changes in build 710:

Added support for the Google Stadia Controller
Added support for the PowerA FUSION Pro Controller
Added support for the PowerA XB1 Fusion Fight Pad
Added support for the Hori Fighting Commander
Added support for the Hyperkin X91
Added support for the Mad Catz FightPad Pro

Changes in build 711:

Fixed regression with 8bitdo SN30 Pro controller

Changes in build 716:

Increased rumble reliability for wired Xbox controllers
Enabled Xbox One LED on PowerA controllers
Added support for the HORI PAD A
Added support for the BDA XB1 Classic Controller
Added support for the BDA XB1 Spectra Pro
Added support for the 8Bitdo NES30 GamePad in wired mode
Fixed streaming disconnect while using the PowerA mini Xbox controller

Changes in build 717:

Fixed suspending and waking with PowerA Xbox One controllers

Changes in build 718:

Added support for the SteelSeries Stratus Duo controller
Fixed regression waking with Xbox 360 wireless controllers

Changes in build 719:

Added support for the Mayflash GameCube controller adapter
Increased rumble reliability for wireless Xbox 360 controllers

Changes in build 721:

Added support for the Nintendo Wii U/GameCube controller adapter
Fixed regression waking with wireless Xbox 360 controllers

Changes in build 731:

Experimental support for the latest firmware update for the Xbox One S and Xbox One Elite Series 2 controllers
Added support for the Hyperkin Duke Xbox One controller
Added support for the 8BitDo M30 GamePad
Updated VirtualHere to version 4.0.8, including some performance fixes

Changes in build 734:

Fixed Xbox One Bluetooth controller immediately waking Steam Link after sleep (you need to wait for the controller to time out and turn off before it can wake the Steam Link)
Fixed rumble reliability for Xbox One Bluetooth controllers

Changes in build 736:

Fixed video and input freeze when using a wired controller
Added D-PAD binding for Steam Controllers while in the Steam Link UI
Don't show the controller tips panel for Steam Controllers

Changes in build 737:

More improvements for initializing wired Xbox One controllers

Changes in build 739:

Fixed regression connecting to host in previous build

Changes in build 740:

More improvements for initializing wired Xbox One controllers
Updated libusb to version 1.0.23

Changes in build 742:

Added support for more third party Xbox 360 and Xbox One controllers

Changes in build 743:

Added experimental support for the Xbox One wireless adapter

Changes in build 744:

Fixed mapping for the Xbox One Elite Series 2 controller with updated firmware, connected over Bluetooth

Changes in build 746:

Fixed race condition where restarting the stream quickly could cause a spurious authorization dialog
Added advanced streaming setting to choose whether to show recent games after connecting

Changes in build 747:

Fixed regression with Xbox 360 controllers after waking from sleep mode

Changes in build 748:

Upgraded Qt to version 5.14.1

Changes in build 750:

Updated toolchain to use gcc 9.2.0

Changes in build 753:

Added a controller overlay with mouse mode, on-screen keyboard functionality and more!
The Start/Back/Guide buttons have their normal functionality now, the overlay is brought up with a long button press
Added loading screen tips for useful functionality, including which button opens the overlay
Added the ability to toggle the microphone from the controller overlay
Updated xow to the latest version, including support for the original Xbox One controller and connection stability fixes.

Changes in build 757:

Fixed controller overlay showing up automatically when connecting
Added a setting to change the controller overlay hotkey
Added the option to record/playback input from the controller overlay when on the Windows login screen

Changes in build 758:

Fixed Guide+Start Steam chord shortcut

Changes in build 760:

Fixed using the 8BitDo M30 in XInput mode, along with other older protocol wireless Xbox controllers
Added support for the Xbox One S controller in Bluetooth mode, with firmware version 3.1.1215.0
Implemented volume control in the controller overlay

Changes in build 761:

Fixed toggling the performance graph at runtime

Changes in build 762:

Switched the default controller overlay button to the Back button

Changes in build 763:

Added a tip to let people know they can change the launch mode in the settings
Updated xow to version 0.4

Changes in build 764:

Fixed the triggers being pulled while the controller overlay is up

Changes in build 767:

Fixed button clicks in the controller overlay when audio streaming is disabled
Updated xow to version 0.4-5

Changes in build 770:

Updated localization, fixed Chinese font issue

Changes in build 772:

Added support for the Razer Wolverine Ultimate controller
Added support for the Razer Atrox Arcade Stick
Fixed the default face button mappings on Nintendo Switch Pro controllers
Disable xow while the dongle is being shared via VirtualHere

Changes in build 774:

Added support for the following controllers:
* 8BitDo N30 Pro 2
* 8BitDo SN30 Gamepad
* 8BitDo SN30 Pro+
* 8BitDo Zero 2
* SZMY-POWER PC Gamepad
* ThrustMaster eSwap PRO Controller
* ZEROPLUS P4 Wired Gamepad

Changes in build 776:

Improved detecting changed Steam clients when the host computer's MAC addresses are updated

Changes in build 778:

Added tooltip descriptions for buttons in the controller overlay

Changes in build 779:

Fixed typo in Turkish localization of the performance graph

Changes in build 780:

Updated xow to version 0.5, for improved compatibility and stability

Changes in build 781:

Fixed audio being muted after updating to recent firmware builds

Changes in build 782:

Added support for the MOGA XP5-X Plus controller

Changes in build 783:

Added initial support for the PS5 DualSense Controller, and the Xbox Series X controller connected over USB. The Xbox Series X controller is not currently supported over Bluetooth.

Changes in build 786:

Added full support for the PS5 DualSense Controller. Support for the LED, trackpad, rumble and gyro are enabled when connecting to Steam beta dated November 18th or newer.

Changes in build 788:

Fixed bugs in the new PS5 controller support
Revamped Xbox controller support for improved reliability with new controllers

Changes in build 789:

Fixed guide button on Xbox One controllers connected via Bluetooth

Changes in build 791:

Fixed Xbox controllers generating mouse motion when connected over Bluetooth

Changes in build 792:

Added support for the EVORETRO GameCube Adapter in Switch/Wii U mode

Changes in build 793:

Added rumble support for the Google Stadia wired controller

Changes in build 794:

Added rumble support for the Google Stadia wired controller

Laatst bewerkt door slouken; 17 dec 2021 om 15:58

slouken

17 dec 2021 om 15:56

Changes in build 802:

Introducing new look for the UI with more informative dialogs
Improved audio range when using volume controls
Improved font rendering for Thai and Vietnamese

Changes in build 806:

Updated xow to version v0.5-26

Changes in build 807:

Reduced action button size so you can comfortably fit 6 actions without scrolling

Changes in build 809:

Fixed downloading files over HTTPS using Qt networking

Changes in build 812:

Added an option to change the overlay hotkey (by default ESC)

Changes in build 813:

Fixed black screen when plugging in unofficial Xbox 360 wireless adapters

Changes in build 814:

Added support for the Share button on the PowerA Fusion Pro 2 and the PDP Xbox Series X Afterglow controllers

Changes in build 815:

Fixed muting audio when plugging in the PS5 DualSense and Amazon Luna controllers
Added support for the Amazon Luna Controller in DirectInput mode
Added support for the Razer Wolverine Tournament Edition controller

Changes in build 817:

Added support for the full line of PowerA Series X controllers
Added support for the PowerA Nintendo Switch Fusion Arcade Stick
Added a reset button to the Bluetooth panel that clears all pairings and resets the Bluetooth radio

Changes in build 819:

Fixed Bluetooth regression in previous build where some controllers wouldn't complete a connection.

Changes in build 820:

Added experimental support for the Xbox Series X controllers over Bluetooth. This requires you to upgrade your controller to the latest firmware using an Xbox or the Xbox Accessories App on a PC, and then perform a Steam Link Bluetooth reset. Initial pairing doesn't always work and Microsoft is working on a controller firmware update to make this more reliable.
Updated Xbox wired controller initialization, please report any regressions.

Changes in build 821:

Select low latency mode on wired Microsoft Xbox Series X controllers

Changes in build 822:

Added support for streaming from Windows 11

Changes in build 823:

Fixed getting input from older PowerA controllers

Changes in build 825:

Reverted previous change which didn't work.

Changes in build 826:

Fixed mouse functionality when the Remote Play overlay is up

Changes in build 827:

Fixed detecting hot-plugged controllers

Changes in build 829:

Improved UI highlighting on the controller overlay
Fixed being unable to turn off the Steam Link when left on for several hours
Fixed occasional controller disconnect while using the Xbox wireless dongle

Changes in build 830:

Fixed mouse cursor visibility that was broken in build 829

Changes in build 834:

Added the ability to pair with offline Steam clients
Fixed no audio playing on Bluetooth headphones

Changes in build 835:

Fixed pairing pin prompt showing up briefly after a successful pairing

Changes in build 836:

Added support for the Nintendo Online classic controllers
Added support for the Qanba Obsidian and Dragon Arcade Joysticks
Fixed triggers being pulled when pressing the controller overlay button

Changes in build 837:

Added enhanced rumble emulation for DualSense Wireless Controllers with updated firmware

Changes in build 838:

Fixed crash on startup for some users, introduced in the last update

Changes in build 842:

Added support for Nintendo Joy-Con controllers, both individually as a mini-gamepad and combined into pairs. Correct button mapping on the remote side requires a Steam client beta update dated 8/4/2022 or newer.
Improved support for the Nintendo Online classic controllers
Added support for the 8BitDo Pro 2 controller
You can now wake the Steam Link by pressing a button on a wired controller such as the PlayStation or Nintendo controllers.

Changes in build 843:

Added support for the HORIPAD FPS for Nintendo Switch

Changes in build 844:

PlayStation and Nintendo controllers turn off LEDs while Steam Link is sleeping, but can wake it by pressing a button on the controller.

Changes in build 845:

Fixed issue with Steam Link not shutting down correctly when Xbox 360 wired and wireless controllers are connected, introduced in build 844.

Changes in build 846:

Fixed connecting with the 8BitDo Pro 2 when in A mode over Bluetooth

Changes in build 848:

Added support for the Hori Fighting Stick α
Added support for the Kinvoca Joy-Con controllers

Changes in build 849:

Improved handling of controllers with built-in audio devices
Improved support for third-party PS3/PS4/PS5 controllers
Added support for Wii controllers
Added support for the HORI Fighting Commander OCTA (Xbox Series X and PS versions)

Changes in build 850:

Updated Steam Link support URL
Fixed regression preventing Steam Controllers from working
Disabled support for Wii controllers
Added support for the Qanba Drone Arcade Stick
Fixed crash when the performance graph is enabled with some languages

Changes in build 851:

Fixed regression in build 850 preventing connections to remote PCs

Changes in build 852:

Fixed PS4 controllers not being detected by Steam while streaming
Fixed freeze when a controller is connected or disconnected while streaming
Added support for the NVIDIA SHIELD controller v1.03

Changes in build 855:

Greatly improved performance at a small cost in bandwidth
Improved audio quality and reduced audio dropouts
Fixed controller rumble when connecting to the public Steam client

Changes in build 856:

Added a streaming option for uncompressed audio, enabled by default

Changes in build 858:

Added support for the "Use Nintendo Button Layout" setting in New Big Picture
Added button labels to the controller test and mapping screens
Fixed the Nintendo Switch Pro controller sometimes not being recognized after being reconnected

Changes in build 859:

Fixed system hard lock when connecting a wireless controller while streaming

Changes in build 861:

Fixed system not going to sleep with a wired Steam Controller connected
Fixed system not waking up with a wired Xbox One controller connected
Fixed rare Xbox One controller firmware crash while rumbling
Fixed initialization for older PDP Xbox One controllers and the Victrix Gambit Tournament controller

Changes in build 862:

Steam Link no longer unpairs from previous accounts when pairing to a new Steam account on the same computer

Changes in build 871:

Improved reliability of Remote Play Anywhere
Fixed rare case of the connection hanging when starting to stream
Fixed virtual controller buttons in the controller overlay
Fixed Xbox One LED not lighting up when waking from sleep mode
Added support for many controllers, including the 8BitDo Ultimate Bluetooth controller

Changes in build 872:

Fixed detection of Steam Controllers, which regressed in the last build

Changes in build 873:

Fixed audio latency introduced in build 871, adding improved resilience to variable network conditions

Changes in build 875:

Steam Link is more responsive when waking up in response to key presses and Bluetooth controller connections
Fixed issue where the sleep function would stop working after a period of time

Changes in build 876:

Continued to improve audio latency
Fixed crackly Bluetooth audio when microphone is disabled (still crackly when microphone is enabled)
Fixed USB audio going silent
Fixed Moonlight crashing at launch introduced in the previous build

Changes in build 877: