still crashing

[SynC_Nightmares]

game still crashing my entire laptop on the cutscene between sequence 2 and 3 preventing me going any further.

please fix this

[T-wRecks]

Set the process affinity to only a few cores (something like half or 8, whatever's lower) any session you think you're going to run into a cutscene. Or just do it every launch, or make a batch file shortcut (I haven't done that, but the info is out there.)

[SynC_Nightmares]

sorry but i have no idea what you mean

Originally posted by T-wRecks:

Set the process affinity to only a few cores (something like half or 8, whatever's lower) any session you think you're going to run into a cutscene. Or just do it every launch, or make a batch file shortcut (I haven't done that, but the info is out there.)

[Basil Brush]

he means if you are running 8 core boot game up hit windows key then right click on the Taskbar click on services than right click on assassin creed unity then you will see it so if you have 8 cores untick four of them its that simple hope it helps

[Ubi-WheelyDuck]

Originally posted by SynC_Nightmares:

game still crashing my entire laptop on the cutscene between sequence 2 and 3 preventing me going any further.

please fix this

Hey SynC_Nightmares,

Thank you for kindly reaching out after crashing between sequence 2 and 3.

If the kind advice shared by others does not resolve this for you, I would recommend to complete the steps in our dedicated troubleshooting guide [ubi.li] to configure your device for the game.

If you then continue to have trouble, would it be possible to share your system specs?

Many thanks

[SynC_Nightmares]

Originally posted by Ubi-WheelyDuck:

Originally posted by SynC_Nightmares:

game still crashing my entire laptop on the cutscene between sequence 2 and 3 preventing me going any further.

please fix this

Hey SynC_Nightmares,

Thank you for kindly reaching out after crashing between sequence 2 and 3.

If the kind advice shared by others does not resolve this for you, I would recommend to complete the steps in our dedicated troubleshooting guide [ubi.li] to configure your device for the game.

If you then continue to have trouble, would it be possible to share your system specs?

Many thanks

Operating system: Microsoft Windows 11 Home, Version 10.0.26100
DirectX runtime version: DirectX 12
Driver: Game Ready Driver - 572.47 - Thu Feb 20, 2025
CPU: Intel(R) Core(TM) Ultra 9 185H
RAM: 32.0 GB
Storage (4): SSD - 953.9 GB,HDD - 3.6 TB,+2 more

Graphics card
GPU processor: NVIDIA GeForce RTX 4070 Laptop GPU
Direct3D feature level: 12_1
CUDA cores: 4608
Graphics clock: 1605 MHz
Max-Q technologies: Gen-5
Dynamic Boost: No
WhisperMode: No
Advanced Optimus: Yes
Maximum graphics power: 125 W
Memory data rate: 15.80 Gbps
Memory interface: 128-bit
Memory bandwidth: 252.8 GB/s
Total available graphics memory: 24314 MB
Dedicated video memory: 8188 MB GDDR6
System video memory: 0 MB
Shared system memory: 16126 MB
Video BIOS version: 95.06.37.00.03
IRQ: Not used
Bus: PCI Express x8 Gen4
Device ID: 10DE 2860 17291025
Part number: 3757 0010

Display (1): Microstep MSI G27C4 E2
Resolution: 1080p, 1920 x 1080 (recommended)
Refresh rate: 120 Hz
Desktop colour depth: Highest (32-bit)
HDCP: Supported

[Swifty404]

"pls fix this" i almost finished the game and the game is more like a pre Alpah version then a AAA game.

So much bugs, problems, bad performance etc.
Enemies in building has X Ray vision
i teleport outside the map when i open a chest
Keyboard inputs dosnt react on climbing most the time
enemies can shoot around a corner
NPC flying in the air
Cant climb up even is there a way to get up there it dosnt react.
sometimes he dosnt drop to the ground and stuck in the wall
enemies spawn in front of me and attacking me instant

but dude we need to bring microtransaction thats more important then gameplay

[verbose]

Originally posted by SynC_Nightmares:

Originally posted by Ubi-WheelyDuck:

Hey SynC_Nightmares,

Thank you for kindly reaching out after crashing between sequence 2 and 3.

If the kind advice shared by others does not resolve this for you, I would recommend to complete the steps in our dedicated troubleshooting guide [ubi.li] to configure your device for the game.

If you then continue to have trouble, would it be possible to share your system specs?

Many thanks

Operating system: Microsoft Windows 11 Home, Version 10.0.26100
DirectX runtime version: DirectX 12
Driver: Game Ready Driver - 572.47 - Thu Feb 20, 2025
CPU: Intel(R) Core(TM) Ultra 9 185H
RAM: 32.0 GB
Storage (4): SSD - 953.9 GB,HDD - 3.6 TB,+2 more

Graphics card
GPU processor: NVIDIA GeForce RTX 4070 Laptop GPU
Direct3D feature level: 12_1
CUDA cores: 4608
Graphics clock: 1605 MHz
Max-Q technologies: Gen-5
Dynamic Boost: No
WhisperMode: No
Advanced Optimus: Yes
Maximum graphics power: 125 W
Memory data rate: 15.80 Gbps
Memory interface: 128-bit
Memory bandwidth: 252.8 GB/s
Total available graphics memory: 24314 MB
Dedicated video memory: 8188 MB GDDR6
System video memory: 0 MB
Shared system memory: 16126 MB
Video BIOS version: 95.06.37.00.03
IRQ: Not used
Bus: PCI Express x8 Gen4
Device ID: 10DE 2860 17291025
Part number: 3757 0010

Display (1): Microstep MSI G27C4 E2
Resolution: 1080p, 1920 x 1080 (recommended)
Refresh rate: 120 Hz
Desktop colour depth: Highest (32-bit)
HDCP: Supported

Pretty sure it has to do with Windows 11 version 24H2, there's another thread talking about it, only fix I found for right now is to use Battle Encoder Shirase (BES) and limit ACU.exe's CPU usage to 80-90%

[SynC_Nightmares]

Originally posted by verbose:

Originally posted by SynC_Nightmares:

Operating system: Microsoft Windows 11 Home, Version 10.0.26100
DirectX runtime version: DirectX 12
Driver: Game Ready Driver - 572.47 - Thu Feb 20, 2025
CPU: Intel(R) Core(TM) Ultra 9 185H
RAM: 32.0 GB
Storage (4): SSD - 953.9 GB,HDD - 3.6 TB,+2 more

Graphics card
GPU processor: NVIDIA GeForce RTX 4070 Laptop GPU
Direct3D feature level: 12_1
CUDA cores: 4608
Graphics clock: 1605 MHz
Max-Q technologies: Gen-5
Dynamic Boost: No
WhisperMode: No
Advanced Optimus: Yes
Maximum graphics power: 125 W
Memory data rate: 15.80 Gbps
Memory interface: 128-bit
Memory bandwidth: 252.8 GB/s
Total available graphics memory: 24314 MB
Dedicated video memory: 8188 MB GDDR6
System video memory: 0 MB
Shared system memory: 16126 MB
Video BIOS version: 95.06.37.00.03
IRQ: Not used
Bus: PCI Express x8 Gen4
Device ID: 10DE 2860 17291025
Part number: 3757 0010

Display (1): Microstep MSI G27C4 E2
Resolution: 1080p, 1920 x 1080 (recommended)
Refresh rate: 120 Hz
Desktop colour depth: Highest (32-bit)
HDCP: Supported

Pretty sure it has to do with Windows 11 version 24H2, there's another thread talking about it, only fix I found for right now is to use Battle Encoder Shirase (BES) and limit ACU.exe's CPU usage to 80-90%

possible but due to me not knowing stuff like this, i'd rather have a solid solution than a temporary fix

[Boggi]

Originally posted by Ubi-WheelyDuck:

Originally posted by SynC_Nightmares:

game still crashing my entire laptop on the cutscene between sequence 2 and 3 preventing me going any further.

please fix this

Hey SynC_Nightmares,

Thank you for kindly reaching out after crashing between sequence 2 and 3.

If the kind advice shared by others does not resolve this for you, I would recommend to complete the steps in our dedicated troubleshooting guide [ubi.li] to configure your device for the game.

If you then continue to have trouble, would it be possible to share your system specs?

Many thanks

I am running into another issue that is probably game performance related and I cant figure it out right now. The issue is that I'm running the game alright but i'm just not getting the fps up to sync my monitor, even if disable some stuff like txaa and so on. The game just stays around 120-130fps as opposed the 180 i expected. For comparison, Cyberpunk is running in 1440p on medium settings at around the same rate.

specs below

------------------
System Information
------------------
Time of this report: 3/14/2025, 16:51:06
Machine name: BEQUIET-R7
Machine Id: {911EAA26-B8F0-4B7D-86E6-75F06D44300F}
Operating System: Windows 11 Pro 64-bit (10.0, Build 26100) (26100.ge_release.240331-1435)
Language: German (Regional Setting: German)
System Manufacturer: Micro-Star International Co., Ltd.
System Model: MS-7E26
BIOS: 1.G0 (type: UEFI)
Processor: AMD Ryzen 7 7800X3D 8-Core Processor (16 CPUs), ~4.2GHz
Memory: 32768MB RAM
Available OS Memory: 31850MB RAM
Page File: 13253MB used, 21796MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
DirectX Database Version: 1.6.7
Auto Super Res Version: Unknown
System Mux Support: Mux Support Inactive - Ok
Mux Target GPU: dGPU
Mux Incompatible List:
DxDiag Version: 10.00.26100.3323 64bit Unicode

Display Devices
---------------
Card name: AMD Radeon RX 7800 XT
Manufacturer: Advanced Micro Devices, Inc.
Chip type: AMD Radeon Graphics Processor (0x747E)
DAC type: Internal DAC(400MHz)
Device Type: Full Device (POST)
Device Key: Enum\PCI\VEN_1002&DEV_747E&SUBSYS_2427148C&REV_C8
Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
Device Problem Code: No Problem
Driver Problem Code: Unknown
Display Memory: 32075 MB
Dedicated Memory: 16150 MB
Shared Memory: 15924 MB

[verbose]

Originally posted by SynC_Nightmares:

Originally posted by verbose:

Pretty sure it has to do with Windows 11 version 24H2, there's another thread talking about it, only fix I found for right now is to use Battle Encoder Shirase (BES) and limit ACU.exe's CPU usage to 80-90%

possible but due to me not knowing stuff like this, i'd rather have a solid solution than a temporary fix

Same tbh here's hoping they fix it soon

[JTM]

My game keeps freezing after replaying Sequence 11 Memory 2 where you have to assassinate La Touche. It freezes after the cutscene ends. Tried it 4 times in a row and every time it keeps freezing... It's so annoying. I had it with other similar missions as well.

[SynC_Nightmares]

ubisoft advised me change my internal refresh rate of my system to 60hz as i was on 165hz.
this helped me get past the problematic freezing of the cutscene i was on.

i advise others to possibly try the same thing

[Brokensword]

Disabling the ubi connect overlay fixed it for me.

Tried all the other work arounds (limit cpu to 90%, core counts, lower settings, refresh to 60hz only etc.) none fixed the issue.

Hope this helps others.

[Delyr]

I FOUND A SOLUTION FOR AC UNITY ON WINDOWS 11, search ac valhalla in dodi-repacks.site (https://dodi-repacks.site/assassins-creed-valhalla/) scroll down and there is a link named: "Windows 11 24H2 CrackFix" despite being for valhalla it works on unity (works on cracked and original copies of the game too), after downloading it, just put on the ac unity main folder and launch the game.
It worked smoothly on free roam to me, but on certain missions/coop missions i was having major lag and sometimes even crashes, for that open the game and taskmanager, right click on ACU.exe and "Go to details", right click again on ACU.exe and set CPU Affinity up until CPU 5 or CPU 7 (uncheck everything else that is not CPU 0 to CPU 5 or 0 to 7), this will limit the amount of cores the game can use, for me only leaving CPU 0 to CPU 5 worked the best.
YOU'LL HAVE TO SET THIS EVERYTIME U OPEN THE GAME, (there are ways to make a script for this but i don't know how :p)