Nitrous problem

[Piston Master]

I activate the NOS. The bar turns green and i get the message 'Nitrous armed''. Although it doesn't engage while on full throttle anymore. I don't know why

[Black flag without the L]

it depends on what gear it is
(tuning menu for what gear and RPM it can be set to)

[Piston Master]

Originally posted by someone say thicc girls?:

it depends on what gear it is
(tuning menu for what gear and RPM it can be set to)

I've tested the nitrous in all gears and rpm's. It just doesnt want to engage or something

[Hugo]

There is a button in the options to manually activate it somewhere. Holding down that button when bound will force it to activate regardless of gear/RPM.

[Frank ツ]

Originally posted by Hugo:

There is a button in the options to manually activate it somewhere. Holding down that button when bound will force it to activate regardless of gear/RPM.

yes you can set it up in the keybinding, personally i use ''manually activate nitrous'' i find it better

[Piston Master]

Well i set up the keybinding and the nitrous finally works only when i press the button. Otherwise it wouldn't engage itself despite being armed

[Nadeox1]

'Armed' means it's ready.
The system will then activate itself when you reach the target RPM, which you can tune in the Part Selector > Tuning menu.

[Piston Master]

Originally posted by Nadeox1:

'Armed' means it's ready.
The system will then activate itself when you reach the target RPM, which you can tune in the Part Selector > Tuning menu.

I know that armed means ready. Although as i said, even if i hit the target RPM and gear, the nitrous will still not activate

[Jaidensky]

Originally posted by Frank ツ:

Originally posted by Hugo:

There is a button in the options to manually activate it somewhere. Holding down that button when bound will force it to activate regardless of gear/RPM.

yes you can set it up in the keybinding, personally i use ''manually activate nitrous'' i find it better

Just be careful NOT to put 20 lbs of nitrous in a single cylinder........ at once.........

[Nadeox1]

Originally posted by Piston Master:

Originally posted by Nadeox1:

'Armed' means it's ready.
The system will then activate itself when you reach the target RPM, which you can tune in the Part Selector > Tuning menu.

I know that armed means ready. Although as i said, even if i hit the target RPM and gear, the nitrous will still not activate

Provide a video please.
Show your Nitrous Oxide settings in the tuning menu, and then the issue

[Piston Master]

Check you DM's in Beamng drive website!

[Nadeox1]

I'd prefer if you keep everything in one place, it makes it easier for me to keep track of things.
Are you using a keyboard, or a controller?

Even if you are at the target RPM and Gear, the system will engage only if your accelerator pedal is fully pressed (100%)
https://media.beamng.com/8ITQeUTT3FUCIfas

If your input method is not giving the game that 100%, the system will not kick in.
So please check that, there's a 'PEDAL' app you can use.

[Piston Master]

Originally posted by Nadeox1:

I'd prefer if you keep everything in one place, it makes it easier for me to keep track of things.
Are you using a keyboard, or a controller?

Even if you are at the target RPM and Gear, the system will engage only if your accelerator pedal is fully pressed (100%)
https://media.beamng.com/8ITQeUTT3FUCIfas

If your input method is not giving the game that 100%, the system will not kick in.
So please check that, there's a 'PEDAL' app you can use.

I've checked that and it showed me that it was at 100%. I'll check it again and send you a screenshot though

[Piston Master]

Here it is: https://imgur.com/aIwlIOR

[Piston Master]

Update: I found the problem. It wasn't enganging because of the clutch interfering a bit despite it being at 4%. Nitrous engaged when i wiggled the clutch button a little and the clutch position went to 0%.