Won't work even though I am using DX12

[CNCharger]

No changes made to my PC, but take a look at this
[img]https://i.imgur.com/132SzEx.png[/img]

I have DX12, and I am using a quadro fx 880m integrated GPU and it use to run on my laptop (16 GB of DDR3 1333MHz). It ran on 800x600 60Hz, but it won't run anymore. I thought the issue was DX10.

[CNCharger]

Oh, just 2 days ago, I installed turbo boost, but BeamNG stopped working like 2 months ago. Should it work now?

[The Chicagoan]

Originally posted by CNCharger:

Oh, just 2 days ago, I installed turbo boost, but BeamNG stopped working like 2 months ago. Should it work now?

Your card isn't directx 12... Pretty sure they stopped supporting DX10, DX 11. So since your card is DX10 you can't run the game at all.

[VaderDFXB]

They're going to be dropping DX10 support, not DX11. If they dropped DX11 support they'd probably alienate at least 50% of players which would be a huge mistake.

[CNCharger]

click the link. I tried to install DX11 cause that was the minimum requiremrnt, and it said I had something newer so I typed in DXDiag and saw I already had DX12.

[CNCharger]

Originally posted by The Chicagoan:

Originally posted by CNCharger:

Oh, just 2 days ago, I installed turbo boost, but BeamNG stopped working like 2 months ago. Should it work now?

Your card isn't directx 12... Pretty sure they stopped supporting DX10, DX 11. So since your card is DX10 you can't run the game at all.

I know they don't support DX10 anymore. I know my card isn't supposed to have DX12, but there it is.

[The Chicagoan]

Originally posted by CNCharger:

Originally posted by The Chicagoan:

Your card isn't directx 12... Pretty sure they stopped supporting DX10, DX 11. So since your card is DX10 you can't run the game at all.

I know they don't support DX10 anymore. I know my card isn't supposed to have DX12, but there it is.

Well whatever software you're using it's wrong. You have DX 10.1

[CasualGamer]

you have instaled a dx12 software, doesnt mean now your card will run dx12 game because your quadro fx 880m only suport dx10.1, that mean even if you have dx11/dx12 installed it still wont suport DX12 game..

[Nadeox1]

Indeed as other said, that card is DirectX10.1 only.

It's possible you saw what 'Windows' is capable of, but it still depends on your hardware.
This page explains how to correctly check what DirectX your hardware supports:
https://wiki.beamng.com/Incompatible_DirectX

[CNCharger]

So it can't use DX12 is what you are saying. I don't have DX10 or 10.1 anymore, so its using DX12 to its best capacity is what I am getting, and the PC's capacity isn't enough to run BeamNG.

[CasualGamer]

Originally posted by CNCharger:

So it can't use DX12 is what you are saying. I don't have DX10 or 10.1 anymore, so its using DX12 to its best capacity is what I am getting, and the PC's capacity isn't enough to run BeamNG.

dude you dont get it or what.. look up on google for your quadro 880m you will see by your eyes that your quadro 880m max DX suport is the 10.1 -.-

[CNCharger]

But when installing DirectX, it removes the older versions cause it doesn't need them. What I am saying is that even though I have DX12, the laptop can't fully utilize it, so it seems more like DX10. You can't have DX10 if you got a newer version of Direct X.

I am looking at the site right now, yes it says it can support up to 10.1, but DXDiag says I am running DX12. You can't have both. Here it is again: [img]https://i.imgur.com/132SzEx.png[/img]

[The Chicagoan]

Originally posted by CNCharger:

But when installing DirectX, it removes the older versions cause it doesn't need them. What I am saying is that even though I have DX12, the laptop can't fully utilize it, so it seems more like DX10. You can't have DX10 if you got a newer version of Direct X.

I am looking at the site right now, yes it says it can support up to 10.1, but DXDiag says I am running DX12. You can't have both. Here it is again: [img]https://i.imgur.com/132SzEx.png[/img]

Installing a newer directx isn't going to get you DX 12... :| Your card has to support it. And your card probably was made like 10 years ago, and it probably has DDR3 VRAM.... Cards can't just get a new DX. Just like my card, the GTX 1070 has DX12. But if DX 13 comes out, will I get it? Nope. I have to upgrade. I honestly have no clue why DXDiag is saying that you have DX12. But it's clearly wrong. You're still running DX 10.1.

[CNCharger]

could it be that its reading what is installed on the PC, but not what is on the card? I am now thinking while its installed, its on the PC, not the card. DX is a driver, right?

[The Chicagoan]

Originally posted by CNCharger:

could it be that its reading what is installed on the PC, but not what is on the card? I am now thinking while its installed, its on the PC, not the card. DX is a driver, right?

Well if you did make an attempt at downloading the newest DX, which I've personally never done. Or needed to. Then there is a chance that the software is getting confused and it thinks you have DX 12, when you really don't. Now my card says it has DX12, but if you think about it... Do you really think a GPU from 2010 would actually have DX 12? Like come on, be realistic here..

https://imgur.com/a/I51PxWk

[CNCharger]

What's your card? I don't see it on there.

Originally posted by The Chicagoan:

Originally posted by CNCharger:

could it be that its reading what is installed on the PC, but not what is on the card? I am now thinking while its installed, its on the PC, not the card. DX is a driver, right?

Well if you did make an attempt at downloading the newest DX, which I've personally never done. Or needed to. Then there is a chance that the software is getting confused and it thinks you have DX 12, when you really don't. Now my card says it has DX12, but if you think about it... Do you really think a GPU from 2010 would actually have DX 12? Like come on, be realistic here..

https://imgur.com/a/I51PxWk