Clutch Pedal Combined with throttle (G27)

[Flyin' Italian]

Hello, i have this issue where my clutch (without being pressed physically) stays to 50% input
When i press the gas pedal, it goes up to 100%
i have seen another user have the same problem in the "Discussions" tab, but didn't find a fix.
The wheel works in other games aswell as in the profiler.

I have tried the following:
1) Deleting the BeamNG.Drive Documents folder
2)Rebound the clutch pedal to the brake axis (and viceversa) and that time the brakes went off, so i assume it's a problem with the axis called "Slider"

Hope i don't ruin your day. :D

[Nadeox1]

You should disable the 'Combined Pedals' option in the Logitech Software.
Then in-game in the Options > Controls menu, press the 'RESET ALL' button.
If done correctly, the game should use the correct default mapping for the G27.


For reference, here you can find the solution to the most common problems:
https://wiki.beamng.com/Steering_wheel_setup

[Flyin' Italian]

Hi Nadeox, i have the Combined pedals setting turned off, and i dont think it would affect anyways, since it combines the gas and brake.
Thanks for the link, but i dint think this is a common problem.
I will anyways try to turn on combined pedals and turn it off, and press the reset all button see what happens

[Benjabad]

I have this problem to.
Do you have Logitech gaming software? If so-
Uninstall it, and then install it back on. This should fix it.

[Flyin' Italian]

kyle, i have fixed it by changine the USB port and reinstalling the driver, one or the other alone did not fix it.
Thanks for the Feedback tho :D

[Benjabad]

Originally posted by マッティア:

kyle, i have fixed it by changine the USB port and reinstalling the driver, one or the other alone did not fix it.
Thanks for the Feedback tho :D

Glad i could help, and glad that you got it fixed!
Happy trails.

[TheHuskyGT]

Also, go into the gameplay options and make sure the clutch assist and throttle assist are ticked off. With that on, the clutch will be automatically applied.

[Flyin' Italian]

thehuskygt, thanks for the heads up, but i do not use any assists, and the issue was shown not only in the "Pedals" app but in the "Hardware" tab aswell

[NightCrawlerZ69]

I have a G27 also and I find for some reason the pedals AXIS get reversed in BeamNG and also in SpinTires! So all I have ever had to do is click reverse AXIS and apply then is fine! it may not make alot of sence but I have had my Logitech G27 with Peddels 6 Speed Shift for a very Long time. So if for instance you press the gas and it reves up but you dont go anywhere? it because the Brake is on full so try Reversing the Brake AXIS!

[Blu]

I have this problem just now and I can't seem to get it to stop

[TheHuskyGT]

Originally posted by Blu:

I have this problem just now and I can't seem to get it to stop

I have a similar problem but with another game: American Truck Simulator. I just can't play it anymore. The pedals are all reversed, or don't work. I tried everything at no avail. BeamNG, My Summer Car and Forza Horizon 4 are working just fine (clutch and H-shifter), which are the only other driving games I play.

I do have a G920 now though.

[Beeman]

I know this this thread is very old but it popped up as the first result on google.

What fixed it for me is unplugging the USB to the wheel, while in game, waiting a couple seconds then plugged it back in, allow the wheel to calibrate and dont push anything during calibration, once it does the game will relearn all the settings.

If this doesnt fix it completely uninstall it from the device manager and reinstall it

[♦Yung Jaxx ♦]

clutch not working. Tried all of this...

[Brianna666]

Originally posted by Flyin' Italian:

kyle, i have fixed it by changine the USB port and reinstalling the driver, one or the other alone did not fix it.
Thanks for the Feedback tho :D

Hey, do you remember what driver you reinstalled?

[Flyin' Italian]

Originally posted by Brianna666:

Originally posted by Flyin' Italian:

kyle, i have fixed it by changine the USB port and reinstalling the driver, one or the other alone did not fix it.
Thanks for the Feedback tho :D

Hey, do you remember what driver you reinstalled?

Hey, just go to the logitech site and download the latest one