Steam Community :: Sign Craft: Simulator

Store Page

Sign Craft: Simulator

All Discussions Screenshots Artwork Broadcasts Videos News Guides Reviews

Sign Craft: Simulator

Store Page

0 in Group Chat

View Stats:

Global Achievements

0 in Group Chat |

View Stats

Global Achievements

Get ready to step into the steel-toe boots of a Sign Technician, in this 3D first-person sign building simulator! Utilize a variety of power tools, hand tools, equipment and materials to construct signs to work order specifications! Measure, cut, weld, squeegee and drill!

$1.99

Visit the Store Page

Most popular community and official content for the past week. (?)

Full version update 1.3.1, yay!

Jan 10

Hey everyone! This update brings us to the full version of Sign Craft: Simulator! I've been working on this game for quite a while. It always is a cool feeling finishing a game.

It's not a super long game, perhaps about an hour or so, depending on playstyle. A bit longer if you go for 100% achievements.

Anyways, this is not a huge update. It adds an ending sequence that can be seen when clocking out on Friday, in Week 3 in Job Mode. I added a bit of stuff to the shop environment, like a pickup truck, the player's car and a big sign truck. They can't be driven, they are just decorative. The update also has some various bug fixing and whatnot.

An ending has been added to the game!
1 achievement for completing the game;
New cat character (dialogue in Week 3);
New setting for V-Sync and max framerate. Turn V-Sync off to manually set max framerate;
Extra shop environment stuff, like overhead lights, vehicles (cosmetic only), etc;
Various improvements, glitch fixes, etc;

Thank you for your support and I hope you enjoy the full version update!

P.S.
I think I might try to see about creating some new capsule art before 'officially' releasing on Steam as the full version. But might just release it as is, soon. But for now, the full version content is available for download.

Sign Craft: Simulator

Unable to Pick Up Last Piece of Trash

I am completing the last task for Friday which was to pick up all the trash. I picked up and threw out every piece except for one that spawned under the wooden stand that holds the ACP 4x8 boards. I can't complete the task unless I pick up the piece but I can figure out a way to get to it. Is this a glitch or am I supposed to use a certain tool?...

StepStep

Jan 25 @ 10:01am

General Discussions

Patch 1.3.0 makes an electrifying entrance!

Dec 9, 2025

This patch brings new content! It includes Week 3 gameplay. This new week of gameplay adds the electrical side of sign fabrication, which is something I've been wanting to include for a long time. I feel that I'm getting close to releasing the full version of the game. Depending on how things go, it might be the next update. It will probably be a small update, to add a little ending and maybe a few other things.

Patch version 1.3.0 notes:

Week 3 Gameplay: introduces the electrical side of sign fabrication;
Introduction Sequence: Now Job Mode has a little introduction when starting a new file;
New Character: In Week 3, a new cat character is introduced. She is there to discuss the electrical stuff;
New Basic Tasks: There are two new Basic Tasks, recycling wire and trimming overgrowth;
New Work Orders: There are two new Work Orders for the two new sign types;
New Achievements: There are several new achievements;
New Tools: SawsEverything Reciprocating Saw, Wire Strippers and a 1" Paint Brush;
New Supplies: Saw blade, F60T12 DL Lamp, Lamp Socket, Lamp Ballast, LED 60W Power supply, LED single-sided stick, Neon lights, Neon Transformer 5KV and Neon blackout paint;
More sound effects;
Widget improvements;
New Signs: Extruded Cabinet and Neon "Beer" Sign;
New Materials: Aluminum Extrusion and Aluminum 2x2 angle;
Updated Player Arms graphics;
Shop layout: Added a new sign face rack that has polycarbonate faces;
Reduced player capsule radius from 40 to 24, moved player camera to be in the middle of capsule, instead of at the back. Allowing for player to get closer to objects, to be able to see them better;
Various other glitch fixes and improvements;

As always, thank you for checking out these notes and for your interest and support!

Sign Craft: Simulator

Update 1.2.0 has arrived at last!

May 3, 2025

Hello again! I apologize for the long delay between updates.

Week 2 focuses on completing Work Orders. They are where you build signs to required specifications to earn experience points for leveling up. The leveling system is barebones as of this update, but there are at least some achievements tied to leveling up.

Update version 1.2.0 notes:

Week 2 gameplay;
10 new achievements;
Added new Job type: Work Orders! Use the Work Order folder to complete Work Orders. These orders are specifications for creating signs, such as sign faces and vinyl types, quantity, measurements, etc. You can view the sign blueprint for help with building the sign;
More sound effects for actions/menus;
Level Up/Exp gained widgets;
Saw cut size menu. If you use the primary action key on the base of either the wall saw or drop saw, a menu will open. This menu allows you to set what measurement you want the cut to be at. This makes it much easier to cut materials.
New Material: White Aluminum Sheet Metal. These can be used as sign faces. They are the ones that have a pink plastic backing;
Added level blockers to prevent objects from escaping the bounds of the fence;
New Equipment: Phone. When a work order is selected, use the phone to order vinyl for the job. Located on the desk that has the Basic Task and Work Order folders;
New Equipment: Time Clock. Use this to clock out and progress to the next work day/week. Located by the desk that has the Basic Task and Work Order folders;
New Equipment: Sign Zone. This is in the shop's middle room. Use this area to complete Work Orders. Place a sign that has passed evaluation in the zone. Interact with the zone. If the sign disappears, it was successfully completed;
New Equipment: Frame Zone. This is also in the shop's middle room. When a frame is welded, place the frame in the zone and interact with the zone. If a Work Order is selected, and the frame is the right size, it will align the frame to the proper set up;
Made vinyl application easier. Now the sprays don't dissipate as fast;
Clipboard tool new ability: Sign Frame Aligning!

First you need a Work Order in progress that requires a sign frame. With the clipboard tool held, switch to the sign blueprint by using the tool mode change button. Defaults are "[" and "]" keys. With a metal frame constructed, right click the sign. This aligns the frame properly and will allow the Work Order to be completed correctly.
Clipboard tool new ability: Sign Evaluation!

With a Work Order in progress, and the clipboard tool held, right click the sign to see if it passes or fails the Work Order specifications. Make sure the Work Order is displayed on the clipboard. Press the tool mode change button if necessary. Defaults are "[" and "]" keys;
Fixed sign frame wonkiness. Now it is easier and smoother to pick up, manipulate and move frames;
Updated some tutorials. Added two new tutorials for Sign Fabrication and Work Orders;
Added a white border to the screw mouse cursor, for better visibility;
Adjusted shop layout: Drill and screws now on table with welding tool. Made Vinyl table a little bigger;
Fixed glitch where removing objects from a rack or saw would mess with proper functioning of the object's physics;
Fixed Clipboard glitch where Basic Task screen would get scrunched up;
Object description widget now shows metal bar size converted to units used, such as inches or centimeters. It also now shows the type of vinyl a vinyl print is. Example: "Vinyl Print - Main Logo";
Welder tool uses spool wire at a slower rate, deducts every 2 seconds instead of every 1;
Adjusted drop saw model blade to be oriented how it would be in real life [lol]. Other improvements to wall saw and drop saw to make them work smoother;
Various other glitch fixes and improvements;

Thanks for checking out these notes. And thanks for your support!

Sign Craft: Simulator

Welcome to the board!

If you have any questions or comments, feel free to make a post! :-)

IndiemaniaDev

Oct 21, 2023 @ 8:05am

General Discussions

See More Content

No more content. So sad.

You can help: share a screenshot, make a video, or start a new discussion!

Returning to where you were last on this page...

Cancel