Walther P99 AS decocker

[Antti-san]

I noticed an interesting bit when I was reading the wiki article for the P99 AS:

Introduced in 2004, this variant comes closest to a traditional Double-Action/Single-Action trigger with a decocker. In Double-Action mode the internal striker is at rest with no pre-load and the trigger travel is 14 mm (0.55 in) long at approximately 38 N (8.5 lbf) trigger pull. When the slide is racked completely to the rear upon (re)loading, the internal striker is manually pre-♥♥♥♥♥♥ to Single-Action mode and the trigger remains in the forward position for the first shot and the Anti Stress mode is activated. The trigger travel is 14 mm (0.55 in) long in the Anti Stress mode at approximately 20 N (4.5 lbf) trigger pull. On all subsequent shots, the P99AS is automatically pre-♥♥♥♥♥♥ and the trigger travel is reduced to 8 mm (0.3 in) at the same 20 N (4.5 lbf) trigger pull. For manually deactivating the Anti Stress mode and setting the pistol to Double-Action mode the P99AS features a decocking button recessed into the top of the slide, rather than a conventional lever usually found on the side. The Anti Stress mode can also be manually activated by moving the slide approximately 10 mm (0.4 in) back.

The decocking/double action feature would be interesting to have, think you could update the model in the future to include this? The decocking button is on the model, it just doesn't have any function in the game currently.

[-=NE=-]

yep.. now it is available and we could do it possible....but all time we have we put into the production of the new models and new project.

[Antti-san]

Sure, I understand. Just something that I hope can be looked into in the future, when there is time.