Thrustmaster T150 FFB Settings

[Hip]

Hello was wondering if some kind soul could post their T150 setttings for Assetto Corsa. At present I have FFB set to 100 in profiler and within game i have tried other settings but steering feels too light when entering corners

gain set at 80 within the game. and yet i see other players saying their FFB is set at 50??

please advise as i bought this to replace project cars FFB Simulator

thank you in advance

[BruceCheE]

Driver Settings:

Wheel Rotation : 1080 degrees

http://www.pic-upload.de/view-32329629/ThrustmasterSettings.jpg.html


Use Wheelchek and create a LUT file for a much better FFB experience:

http://www.racedepartment.com/downloads/lut-generator-for-ac.9740/


Ingame Settings:

http://www.pic-upload.de/view-32329635/SettingswithLut.jpg.html

or

http://www.pic-upload.de/view-32329640/SettingswithLutalt.jpg.html

max gain should be 55 otherwise it will give you clipping

checked enhanced understeer gives you a light feeling when the cars is understeering in the corner. uncheck it , if you don´t like that feeling.

[Hip]

thank you so much will try later

[Axsom]

thank you also, i will check this out - i'm new and just getting familiar with the game but use a T150 also…is there somewhere I can lookup/read about other in game setting options?

[Hip]

Hi Again Just wanted to check, is the cfg folder th one contained within my steamapps/assetto corsa file to put myLUT.lut file into Thank you again

[Axsom]

what i see no - go to " My Documents\Assetto Corsa\cfg\" fou9nd it there and made all the changes...easy pezy...
where can i go to learn this stuff? or is there guilds in this game that will accept an experienced gamer, but noob to racing?

[BruceCheE]

Another tip:

The resistance of the standard t150 brake pedal is too weak to get a good feeling for the lockup point. especially if you wearing shoes when driving. i´m using total linear braking (Brake Gamma 1.0). you can increase it a little bit to make the braking less sensitive but i don´t recommend it.
To reduce lockups when braking without ABS you should work a little bit with the car´s setup instead. Look out for the tab " generic" in the car setup menu. You can set the brake bias a little bit towards the rear (move slider left) if you like a oversteering car and you should also lower the brake power/pressure setting from 100% down to a range from 80% to 90% to reduce lockups. for god´s sake the implemented the brake power settings in the setup menu since the last patches.

Anyway I´m totally done with the standard pedals after a year with lot´s of lockups. Today i ordered the T3PA Pro Pedals to get a better feeling on the brake but there is also a much cheaper solution to improve the brake pedal feeling.

Here you can find a video guide to mod the T300 brakes with a cheap conical brake mod. The T300 pedals are almost similar to the T150 except the metal plates on the pedals and this mod works on them too .

https://www.youtube.com/watch?v=Idil5wuI33U

[Axsom]

Ursprünglich geschrieben von BruceCheE:

Another tip:

The resistance of the standard t150 brake pedal is too weak to get a good feeling for the lockup point. especially if you wearing shoes when driving. i´m using total linear braking (Brake Gamma 1.0). you can increase it a little bit to make the braking less sensitive but i don´t recommend it.
To reduce lockups when braking without ABS you should work a little bit with the car´s setup instead. Look out for the tab " generic" in the car setup menu. You can set the brake bias a little bit towards the rear (move slider left) if you like a oversteering car and you should also lower the brake power/pressure setting from 100% down to a range from 80% to 90% to reduce lockups. for god´s sake the implemented the brake power settings in the setup menu since the last patches.

Anyway I´m totally done with the standard pedals after a year with lot´s of lockups. Today i ordered the T3PA Pro Pedals to get a better feeling on the brake but there is also a much cheaper solution to improve the brake pedal feeling.

Here you can find a video guide to mod the T300 brakes with a cheap conical brake mod. The T300 pedals are almost similar to the T150 except the metal plates on the pedals and this mod works on them too .

https://www.youtube.com/watch?v=Idil5wuI33U

Ty for the advice - and I'm going to check out the cheaper solution for now, i do want to upgrade but just need to do it slow...first pedals, then the stearing - i9 want to be able to change wheels - i also race F1
is there anywhere i can learn out the car setups - I'm learning in F1 - but here there are so many typs of cars one can learn about

[BruceCheE]

My T3PA Pro Pedals arrived today. after one or two hours of training the lap times became up to 2,5 seconds faster as with the standard pedals. i think the wheel itself ist absolutely ok and competitive enough to fight with the pros on track. a conical break mod which gives you a good progressive feeling is the key for good, confident trail braking into the corner. the cheap do-it-yourself- mod from the video guide is almost as good as buying a t3pa oder t3pa pro pedal set.

here are 2 little car setup guides
http://www.racedepartment.com/threads/assetto-corsa-car-setup-guides.99049/

https://www.youtube.com/watch?v=TAZNJIgnpnY

[бутылка чифкифа]

вот мои настройки руля клипинга нету и руль более менее тяжелый
https://ibb.co/D8WSNqM
https://ibb.co/DbnpVjP
https://ibb.co/12pPkjC