Game wont start.

[yarianclan]

As the game loads up, it will get to the screen with 3 engings on it, then at the bottom left, you will notice in small fonts, that its runn through its start up process. When mine gets to "ScanningScenario Database" it stops. And nothing happens from there on till i tap the ESC key to get out.
Did my game lose a file or two last night ???

[JJTimothy]

Sounds exactly like the problem I had starting just over a year ago. It began when I subscribed to a Workshop scenario which did not install correctly. Verifying wouldn't fix it, had I tried reinstalling wouldn't have fixed it (without going through the HD and deleting all trace of the Railworks folder). The solution was to find the broken scenario on disk and delete it. The thread detailing my woes (under a different log-in), including the solution, is here:
http://steamcommunity.com/app/24010/discussions/3/135510393194885346/

Hope this is useful.

[yarianclan]

Ok, I'll try to go in and try to remove what senario i think may have caused it.

[yarianclan]

Got rid of all the workshop subscriptions i up loaded, and still nothing.
I guess there is a broken link somewhere in the program starting up sequence.

[OldAlaskaGuy]

Originally posted by yarianclan:

Got rid of all the workshop subscriptions i up loaded, and still nothing.
I guess there is a broken link somewhere in the program starting up sequence.

Did you unsubscribe to them? If not they will reload when you start TS. Close TS, then unsubscribe by going to your profile tab on this page then to Workshop Items then to subscribed items. Unsubscribe to them all. Then restart TS. This will work if it is a workshop item that is corrupted. If it is a corrupted scenario that you may have modified you will need to start logmate then TS and when it dumps copy and paste your entire logmate log here for review.

[JJTimothy]

Or did you only unsubscribe to them? I had a problem recently with a corrupted scenario that didn't cause trouble at start-up but did crash TS when I tried to run it. As described in the other thread I had to find it on the disk and delete its folder. Unsubscribing is not the same thing. When I re-subscribed it was fine. It may sound a bit nuts do have done that but I knew the scenario was basically sound because it ran OK on another system. More likely than not a problematic scenario is OK and it's the installation that's gone wrong.

Good luck with this. It seems there are other problems that present in the same way and I don't mind admitting that rwaday is better at this than me. I have to say that my experience with TS has been largely trouble free (famous last words) which is good for me but does mean I don't have a great deal of trouble-shooting advice to offer.

[yarianclan]

Okay then, Ive unsubscribed from all Workshop uploads, even went as far as uninstalling the game, then reinstalling Train sim.
It get's to the same point, Scanning Scenario Database... and stops.
I'm not too happy.
My Truck Sim runs fine, and I've have had it since Thanksgiving of last year.
Not sure what else to do at this point. With the money I've spent and time creating unique routes, has gone down the drain.

[OldAlaskaGuy]

Did you follow the second part of my suggestion?

[yarianclan]

Yes, I've tried yours, and also from Steam Help too. Nothing has worked. so im going to try to un install TS again, go through all my files and compleatly remove it.
And, then try to re install from the original disk from 2012, and try that.
Thanks for your help, rwaday !

[OldAlaskaGuy]

You did not run logmate and post here. You have not done as I suggested.

[yarianclan]

[RunTimeError 11:18:59] Trace mdump.cpp : 422 = error handlers have been set
[Content 11:19:00] Trace cBlueprintLibrary.cpp : 417 = Blueprint set not found : Kuju, RailSimulatorCore
[Content 11:19:00] Trace cBlueprintLibrary.cpp : 448 = Blueprint set not found for: Cameras\EditCamera001.xml
[Content 11:19:11] Trace cEntity.cpp : 1272 = Missing blueprint "Editor\Gizmo\Scenario Markers\Tutorial Scenario Marker.xml"
[Content 11:19:12] Trace cBlueprintLibrary.cpp : 417 = Blueprint set not found : Kuju,
orCore[Content 11:19:12]
[Content 11:19:12] Trace cBlueprintLibrary.cpp : 448 = Blueprint set not found for: Editor\Gizmo\Scenario Markers\Standard Scenario Marker.xml
[Content 11:19:12] Trace cBlueprintLibrary.cpp : 417 = Blueprint set not found : Kuju,
orCore[Content 11:19:12]
[Content 11:19:12] Trace cEntity.cpp : 1256 = Missing blueprint set "Kuju\
orCore"[Content 11:19:12]
[Content 11:19:12] Trace cBlueprintLibrary.cpp : 266 = Blueprint set not found : Kuju,
orCore[Content 11:19:12]
[Content 11:19:12] Trace cBlueprintLibrary.cpp : 417 = Blueprint set not found : Kuju,
orCore[Content 11:19:12]
[Content 11:19:12] Trace cBlueprintLibrary.cpp : 448 = Blueprint set not found for: Editor\Gizmo\Scenario Markers\Standard Scenario Marker.xml
[Content 11:19:12] Trace cEntity.cpp : 1272 = Missing blueprint "Editor\Gizmo\Scenario Markers\Standard Scenario Marker.xml"
[RunTimeError 11:19:13] Trace mdump.cpp : 381 = Dump taken

[yarianclan]

I think this is what you wanted ??

[OldAlaskaGuy]

Originally posted by yarianclan:

I think this is what you wanted ??

Yep, let me digest it for a while. This is the entirelog, correct?

[OldAlaskaGuy]

The issue is with a .bin file. I can't isolate it from this log. I do not know how many add ons/modifications you have but a clean installation may be your solution. You would need to manually delete your entire Railworks file then do a file verify or reinstallation. I have no other solutions at this time. In the future I would recomend an external backup of your entire Railworks folder. It makes it easier to recover from these issues.

[OldAlaskaGuy]

Originally posted by yarianclan:

I think this is what you wanted ??

PM me please

[yarianclan]

[RunTimeError 16:38:01] Trace mdump.cpp : 422 = error handlers have been set
[Content 16:38:01] Trace cBlueprintLibrary.cpp : 417 = Blueprint set not found : Kuju, RailSimulatorCore
[Content 16:38:01] Trace cBlueprintLibrary.cpp : 448 = Blueprint set not found for: Cameras\EditCamera001.xml
[Content 16:38:13] Trace cEntity.cpp : 1272 = Missing blueprint "Editor\Gizmo\Scenario Markers\Tutorial Scenario Marker.xml"
[Content 16:38:13] Trace cBlueprintLibrary.cpp : 417 = Blueprint set not found : Kuju,
orCore[Content 16:38:13]
[Content 16:38:13] Trace cBlueprintLibrary.cpp : 448 = Blueprint set not found for: Editor\Gizmo\Scenario Markers\Standard Scenario Marker.xml
[Content 16:38:13] Trace cBlueprintLibrary.cpp : 417 = Blueprint set not found : Kuju,
orCore[Content 16:38:13]
[Content 16:38:13] Trace cEntity.cpp : 1256 = Missing blueprint set "Kuju\
orCore"[Content 16:38:13]
[Content 16:38:13] Trace cBlueprintLibrary.cpp : 266 = Blueprint set not found : Kuju,
orCore[Content 16:38:13]
[Content 16:38:13] Trace cBlueprintLibrary.cpp : 417 = Blueprint set not found : Kuju,
orCore[Content 16:38:13]
[Content 16:38:13] Trace cBlueprintLibrary.cpp : 448 = Blueprint set not found for: Editor\Gizmo\Scenario Markers\Standard Scenario Marker.xml
[Content 16:38:13] Trace cEntity.cpp : 1272 = Missing blueprint "Editor\Gizmo\Scenario Markers\Standard Scenario Marker.xml"
[RunTimeError 16:38:14] Trace mdump.cpp : 381 = Dump taken