Armstrong Powerhouse Class 321 EMU

[Scouser888]

Does anyone else own this? If so, please help. I have thoroughly read the manual, and I believe I have 'set up the driver's cab correctly, Followed the driving guide and I am mindful of the keyboard controls. But, I can't get the darn thing moving. The pantograph light is lit, but to be sure, i checked the outside view and it is raised. Any ideas anyone? I am obviouly missing something here and/or doing something wrong.

[ajheneghan]

Turn off the DRA in the front of the cab. that makes it move

[Scouser888]

Originally posted by PhilaSimulation:

Turn off the DRA in the front of the cab. that makes it move

Thanks, but setting up the driver's cab in the manual says to press 'F' on the keyboard, which I did, but I have also turned it off manually in the cab, but to no avail.

[Gerrit Doevenz #77]

Press the left arrow,and turn on the guard to close the doors,It wont move if the doors are open,it defaults Driver operated doors...or just close the doors,there is a button in the cab,

[Motorhomegirl14 [UK]]

If it's the DRA press Y, that will turn it off, if it is the Doors press R, that will close the doors, if your not moving after that, I have no idea, really sorry. Hope that helps.:)

[Scouser888]

Thanks everyone for their input and help. I still can't get the dreadful thing moving, so I have contacted AP support.

[peterpunter1000]

you have to set the destination on the onboard computer press the cab view (down arrow) it shows the computer and the destination codes ie London Liverpool St 5500 set it and im sure you'll be moving .It took me ages to work it out

[guizotia]

I have the same "problem" and glad I looked here. I will try setting the destination. It's the only thing I didn't do because I assumed it was optional.

[Axe]

Was this ever confirmed as the actual answer to the problem?

[GogetaTenks]

Is your reverser set correct?

[sslacko]

HI
I have the 312.
Here is my way of getting it moving
Press DRA yes then put the reverser to forward , then the reset button or Q then with the mouse bring the reverser back just a fraction, you will hear a slight click
release brakes and push the throttle fwd. It works for me.