DLSS+Framegen for NVIDIA 30 series

[orange]

Unlike Ghost of Tsushima the game does not allow NVIDIA 30 series owners to enable DLSS + FSR3 Frame gen, I was able to get it working just fine with the next simple steps tho, no more ghosting and artifacts from FSR upscaler

1. Download the DLSSG to FSR mod (https://www.nexusmods.com/site/mods/738?tab=files) - download the Universal option
2. Copy both dlssg_to_fsr3_amd_is_better.dll and version.dll files from "dll_version" file to your ...\Steam\steamapps\common\BlackMythWukong\b1\Binaries\Win64 folder
3. That's it, you should be able to enable framegen with DLSS in a NVIDIA 30 series :)

I'm getting an avg of 100fps playing on Very High, DLSS on 50 with frame gen on my 3090 (ray tracing off)

[Pharmakokinetic]

Publicado originalmente por MrHollyw00d:

Publicado originalmente por MrHollyw00d:

Dang I can't get this to work moving it to those folders you mentioned. I have followed the steps and have done this before for Cyberpunk but it aint working for me with this game </3

Never mind... I need to learn to read better...

I got the specific universal version you mentioned and copied those files in and it worked like a charm! went from under 40 in some spots to 60-70fps!

can you share a screenshot or describe what you did? I took both dll files from the version.dll folder, and dropped it into the folder where the other DLSS files for Wukong normally are... I thought I was misreading something too but I clearly am missing a critical step here, can't get it to work

[Nyah]

just use TSR + Frame generation

[Simulacrum111]

Publicado originalmente por Grognak:

or use this with any card in any game:
https://store.steampowered.com/app/993090/Lossless_Scaling/

If a game has direct support for upscaling and frame generation then you should not use Lossless Scaling because the in game implementation will always have fewer artifacts. Only consider Lossless Scaling as an alternative to forcing upscaling and frame generation through your graphics driver.

[Eclisis]

Publicado originalmente por iiTzMythic:

Publicado originalmente por Grognak:

or use this with any card in any game:
https://store.steampowered.com/app/993090/Lossless_Scaling/

This software is terrible and i will never recommend it

Software is great what are you talking about, I have a 4080 and use it on games that don't have frame gen just to get locked 120fps

[Dyna]

Publicado originalmente por orange:

Unlike Ghost of Tsushima the game does not allow NVIDIA 30 series owners to enable DLSS + FSR3 Frame gen, I was able to get it working just fine with the next simple steps tho, no more ghosting and artifacts from FSR upscaler

1. Download the DLSSG to FSR mod (https://www.nexusmods.com/site/mods/738?tab=files) - download the Universal option
2. Copy both dlssg_to_fsr3_amd_is_better.dll and version.dll files from "dll_version" file to your ...\Steam\steamapps\common\BlackMythWukong\b1\Binaries\Win64 folder
3. That's it, you should be able to enable framegen with DLSS in a NVIDIA 30 series :)

I'm getting an avg of 100fps playing on Very High, DLSS on 50 with frame gen on my 3090 (ray tracing off)

I have copy paste this in here as the file location on this topic was incorrect.

This game pretty much requires Frame Generation so you might want to get the FSR3 Frame generation mod on Nexus and you need the files named: dlssg_to_fsr3_amd_is_better.dll and the version.dll from the dll_version folder. (Universal mod version)

These 2 files must be in these folders below if you want decoupled FSR3.1 Frame Generation running with DLSS Upscaling.

\BlackMythWukong\Engine\Plugins\Runtime\Nvidia\Streamline\Binaries\ThirdParty\Win64

\BlackMythWukong\b1\Binaries\Win64

There is no registry key or anything that need to be installed just the files needed in the 2 locations. (both files in each location)

There is also FSR3.1 in the game as it is, but it looks horrible when comparing image quality sadly. I had hoped the FSR3.1 FG would have been decoupled as it should be, but Nvidia have to sell the 40 series somehow and i am not going to make speculations.

As an alternative there is Lossless scaling if you want to experience the game at x3 or x4 Frame Generation instead of 1:1 that DLSS and FSR3.1 FG offers.

I personally prefer using the Decoupled FSR3.1 FG with DLSS Upscaling because the FSR3.1 FG have a slightly better image quality compared to Losless Scaling.

But if i wanted full pathtracing enabled and all maxed the Lossless Scaling x3 or x4 option suddenly becomes mandatory for 120 fps or above.

You should be able to enjoy this game on Medium RT quality on the 3070 with the setting from hardware unboxed.

Watch the Vram usage though as that will destroy performance, but i will add that the developer kept the usage pretty low on this title so that is a good thing.

Their video is here:
https://www.youtube.com/watch?v=DuGQTsq3YNU

Getting around 80 FPS with RT on medium and hardware unboxed quality settings on my good old 3090 and 7950x3d with DLSS and FSR FG enabled in the starting area so far.

[Warbreaker]

Starting with FSR 3.1, frame generation was decoupled from it (so you can use FSR FG with DLSS for example), but it seems Wukong is using FSR 3.0 instead of 3.1, what a shame, I see this a lot, newly launched games using very outdated versions of DLSS and FSR.

[big100]

couldnt get the link open and i didnt find that mod in the site

ok so i find the link and did everything but still i cannot active the fg with dlss i have 3060 ti

ok nvm i downloaded the wrong version tnx OP its working

[BentoBoui]

It worked! Thanks.

[Felipeta]

Publicado originalmente por orange:

Unlike Ghost of Tsushima the game does not allow NVIDIA 30 series owners to enable DLSS + FSR3 Frame gen, I was able to get it working just fine with the next simple steps tho, no more ghosting and artifacts from FSR upscaler

1. Download the DLSSG to FSR mod (https://www.nexusmods.com/site/mods/738?tab=files) - download the Universal option
2. Copy both dlssg_to_fsr3_amd_is_better.dll and version.dll files from "dll_version" file to your ...\Steam\steamapps\common\BlackMythWukong\b1\Binaries\Win64 folder
3. That's it, you should be able to enable framegen with DLSS in a NVIDIA 30 series :)

I'm getting an avg of 100fps playing on Very High, DLSS on 50 with frame gen on my 3090 (ray tracing off)

much appreciated! Game is now running smoothly :)

[Noop]

Publicado originalmente por Grognak:

or use this with any card in any game:
https://store.steampowered.com/app/993090/Lossless_Scaling/

Do not waste money on ♥♥♥♥ you can get for free. The person behind that is a scammer. All he does is put things that are freely available behind a paywall and idiot dad gamers who don't understand how the internet works give him money for it.

Huge L my friend.

[NEKTAR]

Yeah I'm getting at least 15 to 20 more fps with the mod. I have a 3080. Highly recommend it.

[MrSoul]

Publicado originalmente por ele:

Publicado originalmente por Kishinfoulux:

This gives extra frames, but it also ♥♥♥♥♥ up the visuals by having a constant like distortion/hissing effect on the sides of the screens and the characters. Looks awful.

Yeah 'cause it's just fake frames created by AI. Never worth having on, just turn the settings down.

Yeah. FSR, DLSS etc. all smoke and mirrors. All looks like janky crap.

Just set the game to run at what your card can feasibly run the game at natively.

[ioneepj]

it helps me with with performance a LOT + finally can play 4k with all high setings with DLSS wich looks much better to me than FSR in this game
(3080mobile with only 8gbVram and able to play in 4K with 60fps, just great)

[Relax Gaming]

If you use Geforce Experience, it will force the option ON for you. I just do that and fix other settings afterward.

[tavo901028]

Thank you. Awesome tip.