Logitech MOMO Force Feedback

[schinschi]

Hey,
I recently installed my old steering wheel. So my question is, which settings should I use? in the Logitech Gaming Software and In-Game
Help is appreciated!

[grift71]

Not sure if you still need tips for the MOMO FFB wheel, but if so, here are my in-game settings. I am still tweaking occasionally, so I'd recommend to just play around with these settings until you find something that works for you.

I have no special settings in the Logitech Gaming Software by the way.

In-Game:

Steering Deadzone: 4%
Steering Saturation: 30% (I started at 5%, then tried 10% and am now up to 30%)
Steering Linearity: 25%
Throttle Deadzone: 5%
Throttle Saturation: 10%
Brake Deadzone: 10%
Brake Saturation: 25%

Then for the Force Feedback Options:

Environmental effects: 50% (have had it at 70% as well)
Feedback strength: 70% (have had it at 100%)
Wheel weight: 0% (to be honest, I can't figure out what this does)

I've also set the Controller override to Steering Wheel, but again, can't figure out what that does.

Hope this gives you at least a decent starting point, but again... play around with the settings until you find something that works for you.

[Niemand]

Logitech Profiler global Settings:
Intensity of all effects 100%
spring effect 0%
damping effect 100%
enable centering 12%
allow overide by game
Wheel:
sensitivity 50%
range 100%
Throttle:
sensitivity 50%
range 100%
Brake:
sensitivity 50%
range 100%
disable "Profiler loading at startup" and close the Logitech Profiler.


Never change the sensitivity& range or you lose the linearity of our wheel and throttle/ brake! Avoid setting a deadzone! If you need a deadzone for throttle and brake chang it only ingame in little step's!


INgame:
select custom Controller and set "override the Steering Wheel"
steering Saturation 0% (you need this for a linearity ratio)
steering wheel linearity 0% (you need this for a linearity ratio)
throttle Saturation 0% (you need this for a linearity ratio)
brake Saturation 0% (you need this for a linearity ratio)
FFB:
Environmental effects 10% or 20%
Feedback strength 0% (if you drive without traction control, set it to 10%)
Wheel weight 20% (if you drive without traction control, set it to 0%)

Is the centering force to strong with "Feedback strength 10%" reduce the "Intensity of all effects" to 90%.



HINT- to calibrated your Momo:
Before you start a race, turn your steering wheel fully to the left & right and press brake and throttle :-)

[schinschi]

Originally posted by grift71:

Not sure if you still need tips for the MOMO FFB wheel, but if so, here are my in-game settings. I am still tweaking occasionally, so I'd recommend to just play around with these settings until you find something that works for you.

I have no special settings in the Logitech Gaming Software by the way.

In-Game:

Steering Deadzone: 4%
Steering Saturation: 30% (I started at 5%, then tried 10% and am now up to 30%)
Steering Linearity: 25%
Throttle Deadzone: 5%
Throttle Saturation: 10%
Brake Deadzone: 10%
Brake Saturation: 25%

Then for the Force Feedback Options:

Environmental effects: 50% (have had it at 70% as well)
Feedback strength: 70% (have had it at 100%)
Wheel weight: 0% (to be honest, I can't figure out what this does)

I've also set the Controller override to Steering Wheel, but again, can't figure out what that does.

Hope this gives you at least a decent starting point, but again... play around with the settings until you find something that works for you.

Thanks for your reply, I fixed it somehow and tbh I don't know what wheel weight is too.
I was really suprised when I saw your settings, because they are exactly the same as mine are now ;)

[schinschi]

Originally posted by Artjom:

Logitech Profiler global Settings:
Intensity of all effects 100%
spring effect 0%
damping effect 100%
enable centering 12%
allow overide by game
Wheel:
sensitivity 50%
range 100%
Throttle:
sensitivity 50%
range 100%
Brake:
sensitivity 50%
range 100%
disable "Profiler loading at startup" and close the Logitech Profiler.


Never change the sensitivity& range or you lose the linearity of our wheel and throttle/ brake! Avoid setting a deadzone! If you need a deadzone for throttle and brake chang it only ingame in little step's!


INgame:
select custom Controller and set "override the Steering Wheel"
steering Saturation 0% (you need this for a linearity ratio)
steering wheel linearity 0% (you need this for a linearity ratio)
throttle Saturation 0% (you need this for a linearity ratio)
brake Saturation 0% (you need this for a linearity ratio)
FFB:
Environmental effects 10% or 20%
Feedback strength 0% (if you drive without traction control, set it to 10%)
Wheel weight 20% (if you drive without traction control, set it to 0%)

Is the centering force to strong with "Feedback strength 10%" reduce the "Intensity of all effects" to 90%.



HINT- to calibrated your Momo:
Before you start a race, turn your steering wheel fully to the left & right and press brake and throttle :-)

Thank you too for your reply!