Instalar Steam
iniciar sesión
|
idioma
简体中文 (chino simplificado)
繁體中文 (chino tradicional)
日本語 (japonés)
한국어 (coreano)
ไทย (tailandés)
Български (búlgaro)
Čeština (checo)
Dansk (danés)
Deutsch (alemán)
English (inglés)
Español de Hispanoamérica
Ελληνικά (griego)
Français (francés)
Italiano
Bahasa Indonesia (indonesio)
Magyar (húngaro)
Nederlands (holandés)
Norsk (noruego)
Polski (polaco)
Português (Portugués de Portugal)
Português-Brasil (portugués de Brasil)
Română (rumano)
Русский (ruso)
Suomi (finés)
Svenska (sueco)
Türkçe (turco)
Tiếng Việt (vietnamita)
Українська (ucraniano)
Comunicar un error de traducción
[]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[] X Protocol Version 11, Revision 0
[] Build Operating System: Linux 3.5.5 x86_64 Gentoo
[] Current Operating System: Linux zlatko 3.6.6 #1 SMP PREEMPT Thu Nov 15 14:02:55 CET 2012 x86_64
[] Kernel command line: BOOT_IMAGE=/vmlinuz ai_net=eth0:10.66.33.2:255.255.255.0: ai_nbd=10.66.33.1:8000 root=/dev/disk/by-uuid/80194b29-da7f-4851-8af2-04325c9b12c4 init=/usr/bin/systemd
[] Build Date: 12 November 2012 12:49:03AM
[]
[] Current version of pixman: 0.28.0
[] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 9 12:43:05 2012
[] (==) Using config file: "/etc/X11/xorg.conf"
[] (==) Using config directory: "/etc/X11/xorg.conf.d"
[] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[] (==) ServerLayout "Layout0"
[] (**) |-->Screen "Screen0" (0)
[] (**) | |-->Monitor "Monitor0"
[] (**) | |-->Device "Device0"
[] (**) |-->Input Device "Keyboard0"
[] (**) |-->Input Device "Mouse0"
[] (**) Option "Xinerama" "0"
[] (==) Automatically adding devices
[] (==) Automatically enabling devices
[] (==) Automatically adding GPU devices
[] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[] Entry deleted from font path.
[] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[] Entry deleted from font path.
[] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[] Entry deleted from font path.
[] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[] Entry deleted from font path.
[] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[] Entry deleted from font path.
[] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[] (==) FontPath set to:
/usr/share/fonts/100dpi/
[] (==) ModulePath set to "/usr/lib64/xorg/modules"
[] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[] (WW) Disabling Keyboard0
[] (WW) Disabling Mouse0
[] (II) Loader magic: 0x5f9f40
[] (II) Module ABI versions:
[] X.Org ANSI C Emulation: 0.4
[] X.Org Video Driver: 13.0
[] X.Org XInput driver : 18.0
[] X.Org Server Extension : 7.0
[] (--) PCI:*(0:1:0:0) 10de:1200:1458:3515 rev 161, Mem @ 0xf8000000/33554432, 0xe8000000/134217728, 0xf0000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[] Initializing built-in extension Generic Event Extension
[] Initializing built-in extension SHAPE
[] Initializing built-in extension MIT-SHM
[] Initializing built-in extension XInputExtension
[] Initializing built-in extension XTEST
[] Initializing built-in extension BIG-REQUESTS
[] Initializing built-in extension SYNC
[] Initializing built-in extension XKEYBOARD
[] Initializing built-in extension XC-MISC
[] Initializing built-in extension XINERAMA
[] Initializing built-in extension XFIXES
[] Initializing built-in extension RENDER
[] Initializing built-in extension RANDR
[] Initializing built-in extension COMPOSITE
[] Initializing built-in extension DAMAGE
[] Initializing built-in extension MIT-SCREEN-SAVER
[] Initializing built-in extension DOUBLE-BUFFER
[] Initializing built-in extension RECORD
[] Initializing built-in extension DPMS
[] Initializing built-in extension X-Resource
[] Initializing built-in extension XVideo
[] Initializing built-in extension XVideo-MotionCompensation
[] Initializing built-in extension XFree86-VidModeExtension
[] Initializing built-in extension XFree86-DGA
[] Initializing built-in extension XFree86-DRI
[] Initializing built-in extension DRI2
[] (II) LoadModule: "glx"
[] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[] (II) Module glx: vendor="NVIDIA Corporation"
[] compiled for 4.0.2, module version = 1.0.0
[] Module class: X.Org Server Extension
[] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
[] Loading extension GLX
[] (II) LoadModule: "nvidia"
[] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[] (II) Module nvidia: vendor="NVIDIA Corporation"
[] compiled for 4.0.2, module version = 1.0.0
[] Module class: X.Org Video Driver
[] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
[] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[] (++) using VT number 7
[] (II) Loading sub module "wfb"
[] (II) LoadModule: "wfb"
[] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[] (II) Module wfb: vendor="X.Org Foundation"
[] compiled for 1.13.0, module version = 1.0.0
[] ABI class: X.Org ANSI C Emulation, version 0.4
[] (II) Loading sub module "ramdac"
[] (II) LoadModule: "ramdac"
[] (II) Module "ramdac" already built-in
[] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[] (==) NVIDIA(0): RGB weight 888
[] (==) NVIDIA(0): Default visual is TrueColor
[] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[] (**) NVIDIA(0): Option "NoLogo"
[] (**) NVIDIA(0): Option "MetaModes" "DFP: NULL, CRT: nvidia-auto-select +0+0"
[] (**) NVIDIA(0): Enabling 2D acceleration
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[] (--) NVIDIA(0): Memory: 1048576 kBytes
[] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.02
[] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[] (--) NVIDIA(0): CRT-0
[] (--) NVIDIA(0): CRT-1
[] (--) NVIDIA(0): DFP-0
[] (--) NVIDIA(0): Samsung SyncMaster (DFP-1) (connected)
[] (--) NVIDIA(0): DFP-2
[] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): 165.0 MHz maximum pixel clock
[] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal Single Link TMDS
[] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (WW) NVIDIA(0): No valid modes for "DFP:NULL,CRT:nvidia-auto-select+0+0";
[] (WW) NVIDIA(0): removing.
[] (WW) NVIDIA(0):
[] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[] (WW) NVIDIA(0): "nvidia-auto-select".
[] (WW) NVIDIA(0):
[] (II) NVIDIA(0): Validated MetaModes:
[] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
[] (--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
[] (--) NVIDIA(0): option
[] (--) Depth 24 pixmap format is 32 bpp
[] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[] (II) NVIDIA: access.
[] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[] (II) NVIDIA(0): configuration option may not be set correctly. When the
[] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[] (II) NVIDIA(0): Config Options in the README.
[] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[] Loading extension NV-GLX
[] (==) NVIDIA(0): Disabling shared memory pixmaps
[] (==) NVIDIA(0): Backing store disabled
[] (==) NVIDIA(0): Silken mouse enabled
[] (**) NVIDIA(0): DPMS enabled
[] Loading extension NV-CONTROL
[] Loading extension XINERAMA
[] (WW) NVIDIA(0): Option "TwinView" is not used
[] (II) Loading sub module "dri2"
[] (II) LoadModule: "dri2"
[] (II) Module "dri2" already built-in
[] (II) NVIDIA(0): [DRI2] Setup complete
[] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[] (--) RandR disabled
[] (II) Initializing extension GLX
[] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[] (II) LoadModule: "evdev"
[] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[] (II) Module evdev: vendor="X.Org Foundation"
[] compiled for 1.13.0, module version = 2.7.3
[] Module class: X.Org XInput Driver
[] ABI class: X.Org XInput driver, version 18.0
[] (II) Using input driver 'evdev' for 'Power Button'
[] (**) Power Button: always reports core events
[] (**) evdev: Power Button: Device: "/dev/input/event1"
[] (--) evdev: Power Button: Vendor 0 Product 0x1
[] (--) evdev: Power Button: Found keys
[] (II) evdev: Power Button: Configuring as keyboard
[] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[] (**) Option "xkb_rules" "evdev"
[] (**) Option "xkb_model" "evdev"
[] (**) Option "xkb_layout" "us"
[] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[] (II) Using input driver 'evdev' for 'Power Button'
[] (**) Power Button: always reports core events
[] (**) evdev: Power Button: Device: "/dev/input/event0"
[] (--) evdev: Power Button: Vendor 0 Product 0x1
[] (--) evdev: Power Button: Found keys
[] (II) evdev: Power Button: Configuring as keyboard
[] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[] (**) Option "xkb_rules" "evdev"
[] (**) Option "xkb_model" "evdev"
[] (**) Option "xkb_layout" "us"
[] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event9)
[] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[] (**) BTC USB Multimedia Keyboard: always reports core events
[] (**) evdev: BTC USB Multimedia Keyboard: Device: "/dev/input/event9"
[] (--) evdev: BTC USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[] (--) evdev: BTC USB Multimedia Keyboard: Found keys
[] (II) evdev: BTC USB Multimedia Keyboard: Configuring as keyboard
[] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/input/input9/event9"
[] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 8)
[] (**) Option "xkb_rules" "evdev"
[] (**) Option "xkb_model" "evdev"
[] (**) Option "xkb_layout" "us"
[] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event10)
[] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[] (**) BTC USB Multimedia Keyboard: always reports core events
[] (**) evdev: BTC USB Multimedia Keyboard: Device: "/dev/input/event10"
[] (--) evdev: BTC USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[] (--) evdev: BTC USB Multimedia Keyboard: Found keys
[] (II) evdev: BTC USB Multimedia Keyboard: Configuring as keyboard
[] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.1/input/input10/event10"
[] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 9)
[] (**) Option "xkb_rules" "evdev"
[] (**) Option "xkb_model" "evdev"
[] (**) Option "xkb_layout" "us"
[] (II) config/udev: Adding input device DELL Laser Mouse (/dev/input/event11)
[] (**) DELL Laser Mouse: Applying InputClass "evdev pointer catchall"
[] (**) DELL Laser Mouse: Applying InputClass "evdev pointer catchall"
[] (II) Using input driver 'evdev' for 'DELL Laser Mouse'
[] (**) DELL Laser Mouse: always reports core events
[] (**) evdev: DELL Laser Mouse: Device: "/dev/input/event11"
[] (--) evdev: DELL Laser Mouse: Vendor 0x461 Product 0x4d51
[] (--) evdev: DELL Laser Mouse: Found 9 mouse buttons
[] (--) evdev: DELL Laser Mouse: Found scroll wheel(s)
[] (--) evdev: DELL Laser Mouse: Found relative axes
[] (--) evdev: DELL Laser Mouse: Found x and y relative axes
[] (II) evdev: DELL Laser Mouse: Configuring as mouse
[] (II) evdev: DELL Laser Mouse: Adding scrollwheel support
[] (**) evdev: DELL Laser Mouse: YAxisMapping: buttons 4 and 5
[] (**) evdev: DELL Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input11/event11"
[] (II) XINPUT: Adding extended input device "DELL Laser Mouse" (type: MOUSE, id 10)
[] (II) evdev: DELL Laser Mouse: initialized for relative axes.
[] (**) DELL Laser Mouse: (accel) keeping acceleration scheme 1
[] (**) DELL Laser Mouse: (accel) acceleration profile 0
[] (**) DELL Laser Mouse: (accel) acceleration factor: 2.000
[] (**) DELL Laser Mouse: (accel) acceleration threshold: 4
[] (II) config/udev: Adding input device DELL Laser Mouse (/dev/input/mouse0)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event4)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event5)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event3)
[] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[] (**) Eee PC WMI hotkeys: always reports core events
[] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event3"
[] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[] (--) evdev: Eee PC WMI hotkeys: Found keys
[] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input3/event3"
[] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[] (**) Option "xkb_rules" "evdev"
[] (**) Option "xkb_model" "evdev"
[] (**) Option "xkb_layout" "us"
[] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[] (II) No input driver specified, ignoring this device.
[] (II) This device may have been added with another device file.
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] [mi] Increasing EQ size to 512 to prevent dropped events.
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x586256]
(EE) 1: /usr/bin/X (mieqEnqueue+0x26b) [0x5677bb]
(EE) 2: /usr/bin/X (0x400000+0x49a82) [0x449a82]
(EE) 3: /usr/lib64/xorg/modules/input/evdev_drv.so (0x7f80a43b0000+0x6008) [0x7f80a43b6008]
(EE) 4: /usr/bin/X (0x400000+0x72977) [0x472977]
(EE) 5: /usr/bin/X (0x400000+0x9bdc8) [0x49bdc8]
(EE) 6: /lib64/libpthread.so.0 (0x7f80a998c000+0x10410) [0x7f80a999c410]
(EE) 7: /usr/lib64/xorg/modules/drivers/nvidia_drv.so (0x7f80a4a09000+0xf11bf) [0x7f80a4afa1bf]
(EE) 8: /usr/lib64/libpixman-1.so.0 (0x7f80aa590000+0x103bf) [0x7f80aa5a03bf]
(EE) 9: /usr/lib64/libpixman-1.so.0 (0x7f80aa590000+0x16a0e) [0x7f80aa5a6a0e]
(EE) 10: /usr/lib64/libpixman-1.so.0 (0x7f80aa590000+0x1e048) [0x7f80aa5ae048]
(EE) 11: /usr/lib64/libpixman-1.so.0 (0x7f80aa590000+0x4f072) [0x7f80aa5df072]
(EE) 12: /usr/lib64/libpixman-1.so.0 (pixman_image_composite32+0x459) [0x7f80aa59af89]
(EE) 13: /usr/lib64/xorg/modules/libwfb.so (wfbComposite+0x1d8) [0x7f80a49fbc38]
(EE) 14: /usr/lib64/xorg/modules/drivers/nvidia_drv.so (0x7f80a4a09000+0x536e87) [0x7f80a4f3fe87]
(EE) 15: /usr/bin/X (0x400000+0x10f989) [0x50f989]
(EE) 16: /usr/bin/X (0x400000+0x108864) [0x508864]
(EE) 17: /usr/bin/X (0x400000+0x353d1) [0x4353d1]
(EE) 18: /usr/bin/X (0x400000+0x2410a) [0x42410a]
(EE) 19: /lib64/libc.so.6 (__libc_start_main+0xfd) [0x7f80a8cfb4bd]
(EE) 20: /usr/bin/X (0x400000+0x23c69) [0x423c69]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
[] [mi] Increasing EQ size to 1024 to prevent dropped events.
[] [mi] EQ processing has resumed after 97 dropped events.
[] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.
[] (WW) NVIDIA(0): WAIT (2, 8, 0x8000, 0x0000212c, 0x00002bc8)
[] (WW) NVIDIA(0): WAIT (0, 8, 0x8000, 0x00002bc8, 0x00002bc8)
[] (WW) NVIDIA(0): WAIT (0, 8, 0x8000, 0x0000e184, 0x0000e184)
[] (WW) NVIDIA(0): WAIT (2, 8, 0x8000, 0x0000e19c, 0x0000e274)
[] (WW) NVIDIA(0): WAIT (0, 8, 0x0000, 0x0000e274, 0x0000e274)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (WW) NVIDIA(0): WAIT (2, 8, 0x8000, 0x00003be4, 0x00004680)
[] (WW) NVIDIA(0): WAIT (1, 8, 0x8000, 0x00003be4, 0x00004680)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
[] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[] (II) NVIDIA(GPU-0): 3D Vision stereo.
[] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[] (**) NVIDIA(0): has been enabled on all display devices.)
Processor Information:
Vendor: GenuineIntel
Speed: 3300 Mhz
4 logical processors
2 physical processors
HyperThreading: Supported
FCMOV: Supported
SSE2: Supported
SSE3: Supported
SSSE3: Supported
SSE4a: Unsupported
SSE41: Supported
SSE42: Supported
Network Information:
Network Speed:
Operating System Version:
Linux (64 bit)
Kernel Name: Linux
Kernel Version: 3.6.6
X Server vendor: The X.Org Foundation
X Server release: 11300000
Video Card:
Driver: NVIDIA Corporation GeForce GTX 560 Ti/PCIe/SSE2
Driver Version: 4.3.0 NVIDIA 310.19
Desktop Color Depth: 24 bits per pixel
Monitor Refresh Rate: 59 Hz
VendorID: 0x10de
DeviceID: 0x1200
Number of Monitors: 1
Number of Video Cards Not Detected
Primary Display Resolution: 1920 x 1200
Desktop Resolution: 1920 x 1200
Primary Display Size: 20.39" x 12.76" (24.02" diag)
51.8cm x 32.4cm (61.0cm diag)
Primary Bus: PCI Express 16x
Primary VRAM: 1023 MB
Supported MSAA Modes: 2x 4x 8x 16x
Sound card:
Audio device: VIA VT1708S
Memory:
RAM: 3940 Mb
Miscellaneous:
UI Language: English
LANG: none
Microphone: Not set
Total Hard Disk Space Available: 386373 Mb
Largest Free Hard Disk Block: 101670 Mb
Installed software:
Recent Failure Reports:
There are several ways to test that theory:
- Run at lower settings.
- Use VSync and/or gfx_iMaxFPSActive to limit the framerate (beware, in case you are using that, you should make sure that powersaving is disabled, otherwise the governor can decide to downclock the CPU causing even worse issues.
- Open the case and blow a domestic desktop fan into the motherboard/GPU.
- Reducing the performance settings from (CPU,GPU,Memory)=(Ultra,High,High) to (Medium,Medium,Medium) *does* seem to completely fix it.
- Limiting the frame rate using gfx_iMaxFPSActive (to 40 or even 20fps) does not fix it or even make it less frequent. Without limit, in the most affected place (tunnels in Silent Riddler) the FPS is around 80. I did disable CPU powersaving (cpufreq-set -r -g performance).
- The desktop fan doesn't help, even after it's been blowing for 15 minutes.
- The Xorg options don't help (I put them in Device section not Screen, figured that's where they need to go. I've verified in the Xorg log they were indeed picked up by the driver).
Content/SeriousSam3/Config/GPU-QL3.cfg
Content/SeriousSam3/Config/GPU-QL4.cfg
Most probable are those variables that are toggles or choices (i.e., where settings are 0/1/2/3, etc). Those that adjust some floating point numbers or texture/buffer sizes are less likely to be of issue here, but I wouldn't completely discount those.
On Ubuntu 12.10 (x64), I used to encounter this bug once in a while but the game have been running pretty much flawlessly since the couple last updates.
Both Ubuntus are on the same machine, using the same game files, on Ubuntu 13.04, I've also tried the 313 Nvida driver and running the game in OpenBox.
I'd also like to point out that I tried running the latest version of Unigine benchmark and it hung with pretty much the same symptoms (image freeze but sound continues in the background) so this may not be related to Serious Sam 3 (the fact that SS3 runs very well on 12.10 seems to confirm this). I also doubt it's related to demanding to much to the GPU because I've been playing a lot of RAGE on 13.04 (using Wine) without a single crash.
Even if it's probably not related to Serious Sam, there is still a severe bug keeping the game from being played on the soon to be released Ubuntu version. If I can provide more info to help fixing this, please ask.
Edit : Screenshot of artefacts are visible in my screenshot gallery (game running in lowest quality)
http://steamcommunity.com/id/strycore/screenshots/
UPDATE: Turns out my power supply wasn't delivering enough power for my GPU. I unplugged some hard drives and I didn't experience any freezes since then.