Grim Dawn

Grim Dawn

查看统计:
Black screen, can't run Repair.exe
Been trying for awhile now to get the game to run. Haven't been able to. It doesn't even start. I get a black screen, it hangs, locks up my computer, and I need to logout to get control back. I'd love to run Repair.exe to see if that fixes it, but it says there is an issue with permissions. I don't know what to do.
< >
正在显示第 1 - 15 条,共 23 条留言
arkai4life 2017 年 12 月 22 日 下午 3:30 
I'm currently having the same issue now the the 4.0 patch is out :(
Unicarn 2017 年 12 月 22 日 下午 5:41 
Are you the administrator? If you are, do you have User Account Control enabled?

Try disabling it, restart, then run Repair.exe
Ben Franklin's M2 Browning 2017 年 12 月 23 日 下午 8:36 
引用自 Unicarn
Are you the administrator? If you are, do you have User Account Control enabled?

Try disabling it, restart, then run Repair.exe

I am admin, and it is disabled :/ new ideas though, so that's forward motion. Hopefully I can get this solved.
Nachtmahr 2017 年 12 月 24 日 上午 1:21 
Had the same issue and refunded it. The only game i was interested in this winter...
I could at least run repair.exe but it didn't help. Deleting options.log and video options didn't help either. Reinstall neither
Ben Franklin's M2 Browning 2017 年 12 月 26 日 上午 8:49 
引用自 Noriaki
Had the same issue and refunded it. The only game i was interested in this winter...
I could at least run repair.exe but it didn't help. Deleting options.log and video options didn't help either. Reinstall neither

I've tried all the same. I played the original quite a bit. nearly beat it I think. But when I got the DLC it wasn't working anymore. Honestly, I support the game, and don't mind the money, I think it's spent to support a good game. I'd just like to hear from the devs or someone to get my copy running. I've emailed and heard nothing yet. Really hoping for something.
StreamWhenGuy 2017 年 12 月 26 日 上午 9:15 
Try /d3d9 in launch options.
Ben Franklin's M2 Browning 2017 年 12 月 27 日 上午 9:02 
/d3d9 didn't seem to change anything. I have found at this point but after 2-5 minutes of it hanging, the game will launch, and it appears to take whatever is in my options.txt. But i can't change settings. Still can't run repair.exe. I guess I'm a little closer?
RodHull 2017 年 12 月 27 日 上午 9:54 
Your best bet is to head over to their official non steam forums, devs are a lot more active there and they have dedicated bug reporting part of their forum. Much more likely to find a solution over there, if not from a dev from one of the many very dedicated long term veterans of the game or modders.
最后由 RodHull 编辑于; 2017 年 12 月 27 日 上午 9:55
StreamWhenGuy 2017 年 12 月 27 日 上午 10:18 
That's weird you can't run Repair.exe. My only guess that the problem is lying somewhere around it. May be antivirus or firewall blocks it. Have yout tried to delete the options.txt file as well with steam cloud disabled? Who knows might work.
最后由 StreamWhenGuy 编辑于; 2017 年 12 月 27 日 上午 10:18
Ben Franklin's M2 Browning 2017 年 12 月 27 日 下午 9:01 
引用自 RodHull
Your best bet is to head over to their official non steam forums, devs are a lot more active there and they have dedicated bug reporting part of their forum. Much more likely to find a solution over there, if not from a dev from one of the many very dedicated long term veterans of the game or modders.

I did post on their forum, no luck yet. Currently emailing with a developer, but it's not going too well. Seems like he's trying to help but doesn't quite know whats going on. It's a pain in the butt.
Ben Franklin's M2 Browning 2017 年 12 月 27 日 下午 9:05 
引用自 KamisantaLolz
That's weird you can't run Repair.exe. My only guess that the problem is lying somewhere around it. May be antivirus or firewall blocks it. Have yout tried to delete the options.txt file as well with steam cloud disabled? Who knows might work.

Yes to all. I've tried putting the game and stuff in every whitelist on my antivirus, deleting the options, and i have steam cloud disabled. I also agree that the weirdest thing is the Repair.exe being totally nonfunctional. I've since found out that the first part will state that options.txt is unreachable or whatever, and the last part, for installing runtimes, says it can't find the files. So I'm really clueless on it. I've also since found that it seems the issue has to do with it (the game) not being able to write anything to my computer. If I shut off steam saving in the options.txt and run the game, I can't create a character, so not only does the game not overwrite options.txt when i change options, but it can't even save characters or anything else. It's really really strange. I'm wondering if somehow it's fragmented to hell or something.
The Blazing Moon 2017 年 12 月 27 日 下午 9:17 
I had some similar troubles a while back when a patch hit and borked my game. What fixed it for me was manually installing a few different versions of Microsoft VCRedist. Though, my game wouldn't run at all, and produced a specific error, while it sounds like yours eventually kicks in, just after a lengthy wait.

Have you tried:
- Right-click the repair.exe and tell it to 'Run as Administrator'?
- Make sure your game files aren't somehow set to 'read only'?
- Use Steam to verify integrity of game files?
- Try disabling/enabling the DLC in Steam?
- Whitelist/add exception for Grim Dawn in your anti-virus/firewall?
- Tried different settings in your computer's graphics card profiles?

(edit*) It really sounds like you don't have administrator priveleges in the folder or disk you are using for the game or Steam, or that something is set to read-only.
最后由 The Blazing Moon 编辑于; 2017 年 12 月 27 日 下午 9:22
lee 2017 年 12 月 27 日 下午 10:07 
引用自 TheBlazingMoon
I had some similar troubles a while back when a patch hit and borked my game. What fixed it for me was manually installing a few different versions of Microsoft VCRedist. Though, my game wouldn't run at all, and produced a specific error, while it sounds like yours eventually kicks in, just after a lengthy wait.

Have you tried:
- Right-click the repair.exe and tell it to 'Run as Administrator'?
- Make sure your game files aren't somehow set to 'read only'?
- Use Steam to verify integrity of game files?
- Try disabling/enabling the DLC in Steam?
- Whitelist/add exception for Grim Dawn in your anti-virus/firewall?
- Tried different settings in your computer's graphics card profiles?

(edit*) It really sounds like you don't have administrator priveleges in the folder or disk you are using for the game or Steam, or that something is set to read-only.
Having the same issue, have tried all of the above, not sure. Just a black screen and windows attempting to force close it.
Ben Franklin's M2 Browning 2017 年 12 月 27 日 下午 10:43 
引用自 ✪ Bot
引用自 TheBlazingMoon
I had some similar troubles a while back when a patch hit and borked my game. What fixed it for me was manually installing a few different versions of Microsoft VCRedist. Though, my game wouldn't run at all, and produced a specific error, while it sounds like yours eventually kicks in, just after a lengthy wait.

Have you tried:
- Right-click the repair.exe and tell it to 'Run as Administrator'?
- Make sure your game files aren't somehow set to 'read only'?
- Use Steam to verify integrity of game files?
- Try disabling/enabling the DLC in Steam?
- Whitelist/add exception for Grim Dawn in your anti-virus/firewall?
- Tried different settings in your computer's graphics card profiles?

(edit*) It really sounds like you don't have administrator priveleges in the folder or disk you are using for the game or Steam, or that something is set to read-only.
Having the same issue, have tried all of the above, not sure. Just a black screen and windows attempting to force close it.

To see if you have the same issue as me, try this: launch the game, press alt tab (it shouldn't do anything) but don't click on the screen at all. If you do it will trigger windows to attempt to shut it down and everything for mine seems to fail at that point. Just launch the game, once your screen goes black, press alt+tab once, and then watch a video or something on your phone or whatever. Give it at least ten minutes. if you end up on desktop, click on the game and it should be running. I'd really appreciate if you try this, and let me know if yours also delays launch, or if yours really does just not launch at all.
Ben Franklin's M2 Browning 2017 年 12 月 27 日 下午 10:48 
引用自 TheBlazingMoon
I had some similar troubles a while back when a patch hit and borked my game. What fixed it for me was manually installing a few different versions of Microsoft VCRedist. Though, my game wouldn't run at all, and produced a specific error, while it sounds like yours eventually kicks in, just after a lengthy wait.

Have you tried:
- Right-click the repair.exe and tell it to 'Run as Administrator'?
- Make sure your game files aren't somehow set to 'read only'?
- Use Steam to verify integrity of game files?
- Try disabling/enabling the DLC in Steam?
- Whitelist/add exception for Grim Dawn in your anti-virus/firewall?
- Tried different settings in your computer's graphics card profiles?

(edit*) It really sounds like you don't have administrator priveleges in the folder or disk you are using for the game or Steam, or that something is set to read-only.

Run as Admin led to no change.
Which game files exactly? my options.txt isn't read only at the very least. Not sure if there are other files I should check on.
Steam verify muliple times, all files there/intact.
Both enabled and disabled DLC. No change I think. Not sure if the waiting thing works with DLC installed, since i don't think i noticed that until after I disabled DLC.
Totally whitlisted.
Possible issue that I will check on. My card might have some OCing set up at the moment, not entirely sure. MSI 1080ti. I think i have the stock OCing turned on. I'll give it a try shutting that off. Might also be worth me messing with a few nvidia side graphics options to override GD's settings. don't expect much, that (in my findings) usually makes things worse, not better, but worth a shot.
< >
正在显示第 1 - 15 条,共 23 条留言
每页显示数: 1530 50

发帖日期: 2017 年 12 月 22 日 下午 1:58
回复数: 23