Performance Issues

[Isoflurane]

Hi all,

Is anyone else struggling to get more than 10 FPS on relatively well specced systems? Im running a 7800x3D, 3070TI, 64gb RAM - game installed on NVME SSD

FurMark and other benchmarks work fine, GPU definitely selected in game menu, I found that when the game launches my fans on my GPU would stop, manually set them to 100% with no fix.

Can not even run windowed at 1080p on low (3440x1440 native) GPU pegged at 100% but cannot identify cause

[Sagranda]

Performance for me is fine for the intro mission and partly on the battle barge, but as soon as I get into the first mission there's a lot of stuttering and low FPS (sub 30).
Shortly tapping out and back in fixes it for a few seconds, but then it's back.
On the battle barge it gets worse as soon as I use any form of menu (tab, squad customization, settings, etc.) Tab out, it's mostly fine until I use one again.
I have tried some of the different settings and a re-install, but it's not working so far (will try more after my shift).
Running a 7600x, a 7900XTX, M.2 NVME and 32GB of RAM. Drivers are up to date.

[Barmyowl]

Originally posted by Sagranda:

Performance for me is fine for the intro mission and partly on the battle barge, but as soon as I get into the first mission there's a lot of stuttering and low FPS (sub 30).
Shortly tapping out and back in fixes it for a few seconds, but then it's back.
On the battle barge it gets worse as soon as I use any form of menu (tab, squad customization, settings, etc.) Tab out, it's mostly fine until I use one again.
I have tried some of the different settings and a re-install, but it's not working so far (will try more after my shift).
Running a 7600x, a 7900XTX, M.2 NVME and 32GB of RAM. Drivers are up to date.

I get same but with the 7900xt I think the games just strenuous on cpus

[Skullkeeper2]

Having a Laptop with AMD Ryzen 9 5900HS, 24Gb of RAM and a RTX3060 i expected it to run smoothly, but even on the LOWEST of graphics configurations has a lot of downframing, even without tons of enemies on screen. Do you think it is an optimization issue?

[Rem NL]

Originally posted by Isoflurane:

Hi all,

Is anyone else struggling to get more than 10 FPS on relatively well specced systems? Im running a 7800x3D, 3070TI, 64gb RAM - game installed on NVME SSD

FurMark and other benchmarks work fine, GPU definitely selected in game menu, I found that when the game launches my fans on my GPU would stop, manually set them to 100% with no fix.

Can not even run windowed at 1080p on low (3440x1440 native) GPU pegged at 100% but cannot identify cause

100% GPU usage doesn't mean its running at maximum capacity though, check if you are getting the expected clockspeeds and or wattage

Your gpu might be sitting on ~500 Mhz instead of 1.700
power draw should be around 250/300 watts

[Steve Harvey, Vampire Hunter]

I can't even watch the opening cutscene...

[Antus_Manus]

Originally posted by Isoflurane:

Hi all,

Is anyone else struggling to get more than 10 FPS on relatively well specced systems? Im running a 7800x3D, 3070TI, 64gb RAM - game installed on NVME SSD

FurMark and other benchmarks work fine, GPU definitely selected in game menu, I found that when the game launches my fans on my GPU would stop, manually set them to 100% with no fix.

Can not even run windowed at 1080p on low (3440x1440 native) GPU pegged at 100% but cannot identify cause

My system is worse than yours and i get 60-100 fps consistantly. Update your drivers.

[Baron]

Howdy folks, some things to try. The first one helped me with the black screen and pegged graphics.

1) (This fixed the issue for me), exit the game, temporarily disable your Anti Virus (this includes windows defender) and launch the game again to see if it runs fine. If it does, you can make an exception for the game folder so the AV leaves it alone as a permanent fix.

2) Ensure anything that might be creating a Overlay on the game is disabled. This includes the Steam, Discord, or Overwolf overlays if you use those.

3) Ensure the game is installed on your SSD if you have one.

4) Ensure everything is updated. Windows Updated. CPU drivers? Updated. GPU drivers? Updated.

If those do not work, there is a guide being maintained with more common fixes here: https://steamcommunity.com/sharedfiles/filedetails/?id=3325253230

[fher]

Originally posted by Steve Harvey, Vampire Hunter:

I can't even watch the opening cutscene...

sameee :(

[Saratoga]

Originally posted by Steve Harvey, Vampire Hunter:

I can't even watch the opening cutscene...

Same problems too. I have an i5 and 1650 super and can run games like Tarkov, squad, and rust pretty well.

[unanswered ¿]

Hi my spec is 16 ram 4060 5600x

Ultra settings 70+ fps, but when swarm - drops to 40 fps
Dlss working bad in this game.
Dlss quality - fps drop from 90 to 40
Taa quality - fps drop to 50/55

And i have another big problem - when i change graphic settings sometimes i have a huge fps drops to 10 fps

Change ultra at low - 10 fps lol. Can fix that only if i restart game from main menu

[Wartoyz]

still can't play without constant game freezing, sound cutting out, constant disconnects from my brothers game, game doesn't load be back to areas I've already cleared. Not touching the game till they patch this ♥♥♥♥. its getting ridiculous.

[𝕁𝕒𝕔𝕜𝕝𝕖]

i get 80 fps on medium settings using dynamic resolutions on 1080p on my 3060ti. i suggest to people when they get a computer they dont get the weird offbrand ''7600x3DOMEGA'' yada yada stuff. get the regular intel cores, rtx, regular ol windows, normal stuff.

[Lynx Khaos]

Originally posted by Prince Vegeta:

i get 80 fps on medium settings using dynamic resolutions on 1080p on my 3060ti. i suggest to people when they get a computer they dont get the weird offbrand ''7600x3DOMEGA'' yada yada stuff. get the regular intel cores, rtx, regular ol windows, normal stuff.

This is the most braindead response I've ever read...

[gloth]

After the patch that 'fixed cpu performance' I am getting this bizarre behaviour:
1) If I use dlss performance the game just... breaks. I m having 3 fps, struggling to click on settings to change it back :)
2) When using dlss quality or balance the game runs fine. Few enemies, massive hordes, everything is ok. Until I get to a part that has a cinematic - for example the bridge explosion on the hive tyrant - then the game just drops to 3 fps again. At that point If I go to settings, change graphic settings to anything and then back to what I previously had, everything goes back to normal.

7900x / 2080

[Lazarus]

I had no problems till now. I experienced stuttering and loss of input recognition.
I'm running a 4060ti, 5800x3d and 32gb of RAM.

Restarting my GPU driver worked for me. (ctrl+shift+win+B)

Worked for me, hope I could help.

For the Emperor!