How to speak like Working Joe

[The Working Joe]

Good day!
I have noticed that some people were interested in speaking like a Working Joe, or creating their own custom voice lines.
I thought that I could be of service.

For this you will need to download Voxal Voice Changer software from their official website: https://www.nchsoftware.com/voicechanger/index.html
Then proceed to download and import the preset I have made: https://dl.orangedox.com/workingjoevoxal
If you are concerned, you can perform a virus check here: https://www.virustotal.com/gui/home/upload

You can then perform a check by clicking the "Preview" button in the Voxal.
If you are not satisfied with this preset, you can always change it by clicking on the "Edit" button in the Voxal. I recommend changing Voice Pitch Shifter's Pitch to your liking.

If you need any help, ask me in the comments below.

[knoxvilles_joker]

How did you do the voice change? I want to get it adapted to arduino on this project for use in a mask:

https://learn.adafruit.com/wave-shield-voice-changer/building-it

[NinthElement]

Lol, the preset gives me a much deeper voice but I don't really sound much like a working joe, still too human. Nicely explained introduction to a very interesting piece of software though.

Edit: "Pitch shifter" makes it a bit more robotic for me if I put it lower.

[knoxvilles_joker]

These are the voice settings in that voxal profile:

3band equalizer
gain 100hz 12db
gain 900hz -46db
gain 2500hz 12 db
voice pitch shifter
50%

amplify
gain percentage 400%

distortion
degree 78%
level -10db

compressor
threshold -10db
ratio 1.00
attack time 100ms
limit 4db
release time 500ms