Install Steam
login
|
language
简体中文 (Simplified Chinese)
繁體中文 (Traditional Chinese)
日本語 (Japanese)
한국어 (Korean)
ไทย (Thai)
Български (Bulgarian)
Čeština (Czech)
Dansk (Danish)
Deutsch (German)
Español - España (Spanish - Spain)
Español - Latinoamérica (Spanish - Latin America)
Ελληνικά (Greek)
Français (French)
Italiano (Italian)
Bahasa Indonesia (Indonesian)
Magyar (Hungarian)
Nederlands (Dutch)
Norsk (Norwegian)
Polski (Polish)
Português (Portuguese - Portugal)
Português - Brasil (Portuguese - Brazil)
Română (Romanian)
Русский (Russian)
Suomi (Finnish)
Svenska (Swedish)
Türkçe (Turkish)
Tiếng Việt (Vietnamese)
Українська (Ukrainian)
Report a translation problem
Wire a camera together on both sides of the door, then connect one of the cameras to power, the second to a switch, and then connect the switch to the door. Now you have to open the door by hand every time, but it closes automatically.
It only closes the doors on both sides with your "solution"
set up everything how you want it to be. and now here's how you wire them and achieve the "AUTOMATIC". Connect the camera wires directly to the generator, then connect another wire to the switch, and finally connect a wire from the switch to the "AUTOMATIC" door, this setup will trigger the function of the camera to turn on the switch whenever it "sees" you, thus supplying power to the "AUTOMATIC" door, opening it. it then will automatically close, when the power trips off the moment the camera no longer "sees" you. the only tricky part is the position of the camera, so to speak.
here's the simplified circuit of my "AUTOMATIC" door
Generator----->Camera------->Switch------->"AUTOMATIC" door
no no it doesn't it works but only for one door, you clearly set it up wrong but if you want another for more than 1 door here, make two cameras on two doors (however many doors you have) connect both cameras to the same switch and same exact power/pylon connect the switch to both doors(only one switch).. thats for outside now make a camera inside that has the main power(power for everything) connected directly to it, run the camera to a switchable pylon and then connect said switchable pylon your other circut/ pylon - pylon. then turn on only outside switch on( the one for the outside not pylon switch) and there ya go... all doors will open when you open one, and then all doors will close/cut power when you hit the camera inside. hit the camera one more time whence already inside to open all doors again. they will both close on the way out no matter what door you walk out.
to simplify for example 2 doors:
outside door 1: camera in middle of door, camera to same switch, switch to door 1, camera to pylon (non switchable) thats not powered yet
outside door 2: camera in middle, camera to same switch, switch to door 2, camera to same unpowered pylon (non switchable)
now inside: solar panel to camera that sees everywhere in house/ all exits, camera to switchable pylon, switchable pylon to normal pylon powering outside, then turn on only outside switch(not the pylon switch) and walk into your doors.
this doesnt work, only opens/closes the door from the outside, ive found a way to open and close doors from both sides if you want to read my most recent comment