DLSS 3 Frame Generation?

[KeFir]

Are there plans to implement DLSS 3 Frame Generation? Generation for FSR 3 is already available, I would like an option for NVIDIA owners.

[Cantoná]

Yeah, I already enabled FG, but it looks bad.
We need FG for 4000 cards

[KeFir]

İlk olarak Cantoná tarafından gönderildi:

Yeah, I already enabled FG, but it looks bad.
We need FG for 4000 cards :menacingduck:

So far Lossless Scaling helps, but with it you can't enable HDR unfortunately

[DaGGeR]

Use Optiscaler to enable FSR 3.1 FG

[KeFir]

İlk olarak DaGGeR tarafından gönderildi:

Use Optiscaler to enable FSR 3.1 FG

This is all different, in the game you can enable FSR FG through the console, but only if you use FSR 3, but I use DLSS, or rather DLAA, and FG from FSR can no longer be enabled with DLSS. It is the FG from DLSS 3 that is needed here

[YT NotAGameAddict]

İlk olarak SV0_KeFir179 tarafından gönderildi:

İlk olarak DaGGeR tarafından gönderildi:

Use Optiscaler to enable FSR 3.1 FG

This is all different, in the game you can enable FSR FG through the console, but only if you use FSR 3, but I use DLSS, or rather DLAA, and FG from FSR can no longer be enabled with DLSS. It is the FG from DLSS 3 that is needed here

How do you enable FSR FG?

[KeFir]

İlk olarak YT NotAGameAddict tarafından gönderildi:

İlk olarak SV0_KeFir179 tarafından gönderildi:

This is all different, in the game you can enable FSR FG through the console, but only if you use FSR 3, but I use DLSS, or rather DLAA, and FG from FSR can no longer be enabled with DLSS. It is the FG from DLSS 3 that is needed here

How do you enable FSR FG?

This will help you
https://www.pcgamingwiki.com/wiki/Silent_Hill_2#FSR_3_Frame_Generation

[Slackerdude74]

İlk olarak SV0_KeFir179 tarafından gönderildi:

Are there plans to implement DLSS 3 Frame Generation? Generation for FSR 3 is already available, I would like an option for NVIDIA owners.

There is only fsr3 so no frame gen in this game. If it had fsr3.1 than it would, but it doesn’t.

[DummeScheißeEinbilden]

Lossless Scaling. Limit fps ingame to 60 and enjoy smooth 240fps

[Lunar Fox]

İlk olarak SV0_KeFir179 tarafından gönderildi:

İlk olarak DaGGeR tarafından gönderildi:

Use Optiscaler to enable FSR 3.1 FG

This is all different, in the game you can enable FSR FG through the console, but only if you use FSR 3, but I use DLSS, or rather DLAA, and FG from FSR can no longer be enabled with DLSS. It is the FG from DLSS 3 that is needed here

yea how?

[KeFir]

https://www.pcgamingwiki.com/wiki/Silent_Hill_2#FSR_3_Frame_Generation

[Dave]

İlk olarak Cantoná tarafından gönderildi:

Yeah, I already enabled FG, but it looks bad.
We need FG for 4000 cards :menacingduck:

Did the below and no option showed up in the game to enable it:
Enable FSR 3 Frame Generation currently not exposed in game's settings

Go to the configuration file(s) location.
Open Engine.ini with a text editor.
Add [SystemSettings] to the bottom of the file, if that section doesn't already exist.
Inside that section, add r.FidelityFX.FI.Enabled=1.
Save the file.
In game, enable FSR 3.0 through graphics options menu for FSR 3 Frame Generation to activate.

EDIT: Ahhh it wasn't a separate thing in options. It shows up under the upscaling as "FSR 3.0" vs 1.0

MUCH better. Cutscenes now run at 60fps vs 30, and I'm getting a nice smooth 144 fps in the game. I don't see any glitches so far with FSR 3.0 FG enabled and on quality.

Running on an rtx 4090 @ 1440p with max settings enabled. I also used the below to kill DOF, film grain, and chromatic aberration

[SystemSettings]
r.DepthOfFieldQuality=0
r.SceneColorFringeQuality=0
r.SceneColorFringe.Max=0
r.FidelityFX.FI.Enabled=1

[KeFir]

İlk olarak Dave tarafından gönderildi:

İlk olarak Cantoná tarafından gönderildi:

Yeah, I already enabled FG, but it looks bad.
We need FG for 4000 cards :menacingduck:

Did the below and no option showed up in the game to enable it:
Enable FSR 3 Frame Generation currently not exposed in game's settings

Go to the configuration file(s) location.
Open Engine.ini with a text editor.
Add [SystemSettings] to the bottom of the file, if that section doesn't already exist.
Inside that section, add r.FidelityFX.FI.Enabled=1.
Save the file.
In game, enable FSR 3.0 through graphics options menu for FSR 3 Frame Generation to activate.

EDIT: Ahhh it wasn't a separate thing in options. It shows up under the upscaling as "FSR 3.0" vs 1.0

MUCH better. Cutscenes now run at 60fps vs 30, and I'm getting a nice smooth 144 fps in the game. I don't see any glitches so far with FSR 3.0 FG enabled and on quality.

Running on an rtx 4090 @ 1440p with max settings enabled. I also used the below to kill DOF, film grain, and chromatic aberration

[SystemSettings]
r.DepthOfFieldQuality=0
r.SceneColorFringeQuality=0
r.SceneColorFringe.Max=0
r.FidelityFX.FI.Enabled=1

I also recommend disabling VRS

r.Vrs.Enable=0

[Jerricky Jebates]

İlk olarak WithdrawingWilli tarafından gönderildi:

Lossless Scaling. Limit fps ingame to 60 and enjoy smooth 240fps

lossless scaling is garbo, looks like garb, i uninstalled that program.

[Stévann]

don't play with lossless, wait an update by nvidia or a mod by puredark, cause the game is dlss 3.5.10 so FG is avaible

[DaGGeR]

İlk olarak SV0_KeFir179 tarafından gönderildi:

İlk olarak DaGGeR tarafından gönderildi:

Use Optiscaler to enable FSR 3.1 FG

This is all different, in the game you can enable FSR FG through the console, but only if you use FSR 3, but I use DLSS, or rather DLAA, and FG from FSR can no longer be enabled with DLSS. It is the FG from DLSS 3 that is needed here

That's what I meant. Optiscaler enables you to use DLSS for upscaling and FSR 3 FG to generate frames while continuing to use DLSS.
Just google Optiscaler (you can find it on GitHub), download the latest release and follow the instructions on GitHub