PS3 Controller keeps disconnecting by itself HALP MEH

[Gorm]

Hi, my PS3 controller keeps disconnecting by itself. I am using the motionjoy gamepad tool. Suddenly while playing, I get a FPS drop for a few seconds and the controller stops responding.
The strange thing is, when I click "Test vibration" in motionjoy, the controller starts working again. I tried a different cable, a different version of motionjoy, different USB port.. keeps doing it. I have been using this controller for some time and it has NEVER done something like this.

Any help will be appreciated.. I would like to progress through the game but cant because of this. :(

[Erheller]

Try using this driver instead:
http://forums.pcsx2.net/Thread-XInput-Wrapper-for-DS3-and-Play-com-USB-Dual-DS2-Controller

[Mudzie]

This is an old post, but for reference I'll say what worked for me since I had the same problem:

Using Motioninjoy, tune down the vibration for both left & right motors to less than 100%. For me, I kept on experimenting until I realized it needs to be 18% to stop disconnecting. So you need to find your limit. Or just disable the vibration completely if you don't care much about it.

The problem is that the PC USB port does not allow as much current as the vibration motors in PS3 controller drain through, that's why it disconnects for safety.

[daleylife]

Mud, you just saved my life! I've been using motionjoy for a year and a half with no problems. But all of a sudden, I started having this disconnecting issue. I *thought* it was fallout4, because a patch had just been released when this started happening. Anyway, finally found this post and the problem is gone. Whew!

[Gorm]

Praise you MUD! Worked. Love you.

[Sergeant]

Thanks a million, Mud!
I already knew that disconnects were due to a vibration and tried to change it to 50,25,10 percents. I was ready to turn it off completely until I found this thread and yours 18% did the job for some reason. No more disconnects!

[Mudzie]

Publicado originalmente por Boykodev:

Thanks a million, Mud!
I already knew that disconnects were due to a vibration and tried to change it to 50,25,10 percents. I was ready to turn it off completely until I found this thread and yours 18% did the job for some reason. No more disconnects!

Hahah wow that's strange. But I'm glad it worked for you and the others. Happy to be of help ;)

[Many-Named]

mine still disconnects despite trying everything mentionned here...

[Sticky White Stuff]

Publicado originalmente por Many-Named:

mine still disconnects despite trying everything mentionned here...

Your fault for using that crap called MotioninJoy. Good luck removing it from your system. You should inform yourself before buying or connecting any third party gamepads. SCPToolkit is the way to go for DualShock 3 and 4, or if you have a single DualShock 4, then InputMapper.

But if you installed MIJ, i won't waste my time trying to solve the problems you have becuse it would be time consuming. If SCPToolkit doesn't work for you after uninstalling MIJ, then MIJ messed things up. Not to mention there are a bunch of leftovers after the uninstall.

As for the vibration, you can have it to full via front USB or BT 2.0 without any input delay. I mean, it is set to full by default anyway. Also, that necro.

[Mudzie]

Publicado originalmente por Many-Named:

mine still disconnects despite trying everything mentionned here...

I have stopped using Motioninjoy long time ago. Regardless of the extremely overemotional statement by @GLUE ⛧, if you do not know exactly how Motioninjoy works, it will cause some problems because it changes and adds drivers (which give direct access to hardware), and it isn't very easy to get rid of.

I started using SCPServer afterwards. Now in principle, it does the same thing: adds and changes some drivers. And if you want to use Bluetooth to connect DS3 to your PC, SCPSever makes sure you cannot use the Bluetooth with any other device anymore (otherwise it wouldn't work for DS3). With SCP, whether you connect via USB or Bluetooth, vibration causes no problems. SCP is more stable than Motioninjoy, AND you can simply reset your system by removing changes also using the SCP interface. No extra work!

However when restarting the computer, sometimes and only sometimes, the computer does not recognize the DS3 anymore. I remove the drivers and then reinstall them via the SCP interface, and it starts working again.

Here's where you can get it with full instructions by "Scarlet.Crush":
http://forums.pcsx2.net/Thread-XInput-Wrapper-for-DS3-and-Play-com-USB-Dual-DS2-Controller

I hope this will help!

[Gorm]

Set the vibration on both motors to minimum. That helped me.

[76561198813514969]

I am also using scpserver, but my controller still disconnects every 3 minutes. I tried uninstalling and installing again a few times and resetting the controller, but nothing fixes it. What do I need to do?

[BIG BOSS 46]

Guys for fix this problem only solution is open and remove battery...ooyes

[Bob]

This thread was quite old before the recent post, so we're locking it to prevent confusion.