Wrestling Empire

Wrestling Empire

Maxwell_Edison 26. juli 2021 kl. 13:56
Game too fast. Super speed
I open game and menus don't work - a single tap on my controller zooms to the end of the menus. I finally managed to get into game and all wrestlers are basically flying around, as if the game speed is COMPLETELY broken. Google and found nothing. What do?
< >
Viser 1-9 af 9 kommentarer
Kenny Grime 26. juli 2021 kl. 22:07 
Crazy, my only suggestion at the moment would be try it in windowed mode and see if it happens there. Hope things work out for you.
FlimFlamMan 27. juli 2021 kl. 9:58 
Is your PC set to force higher locked hertz/vsync? Game speed seems to be tied to framerate and needs to be 30fps. I realized this when I set the game speed in the camera settings to fast it doubled the games speed when at 60fps. Not sure about the controller issue or if that's a different issue or related
Maxwell_Edison 30. juli 2021 kl. 18:36 
Monitor is 144hz. Might be it

How do i force 30? Better question WHY IS IT STILL LOCKED TO 30
Sidst redigeret af Maxwell_Edison; 30. juli 2021 kl. 18:37
General Frost 12. aug. 2021 kl. 22:18 
Oprindeligt skrevet af Maxwell_Edison:
Monitor is 144hz. Might be it

How do i force 30? Better question WHY IS IT STILL LOCKED TO 30
Did you ever fix the issue? I had the same issue and if you have nvidia you can limit it in the control panel. Fixed it for me.
Sidst redigeret af General Frost; 12. aug. 2021 kl. 23:05
Joker 14. aug. 2021 kl. 20:12 
Oprindeligt skrevet af General Frost:
Oprindeligt skrevet af Maxwell_Edison:
Monitor is 144hz. Might be it

How do i force 30? Better question WHY IS IT STILL LOCKED TO 30
Did you ever fix the issue? I had the same issue and if you have nvidia you can limit it in the control panel. Fixed it for me.
Any tips on how to do this?
Mr Deanster 17. aug. 2021 kl. 11:16 
Re posting from another thread.

Oprindeligt skrevet af Rob:
Found the "fix" for anyone else who runs into this go into NVIDIA control panel

1. Click 3D Settings >> Manage 3D settings
2. Click Program Settings tab
3. Click Add
4. Add the demo exe or full game whatever you have
5. Scroll through the settings to "Max frame rate" and select it
6. select on and choose 30
7. Click OK

Rerun the game and it will play "normally"

I think the actual speed is 40 fps but i could be wrong.
Maxwell_Edison 20. aug. 2021 kl. 7:10 
Oprindeligt skrevet af Charls Barkly:
Re posting from another thread.

Oprindeligt skrevet af Rob:
Found the "fix" for anyone else who runs into this go into NVIDIA control panel

1. Click 3D Settings >> Manage 3D settings
2. Click Program Settings tab
3. Click Add
4. Add the demo exe or full game whatever you have
5. Scroll through the settings to "Max frame rate" and select it
6. select on and choose 30
7. Click OK

Rerun the game and it will play "normally"

I think the actual speed is 40 fps but i could be wrong.
Unfortunately I'm AMD and can't find a similar option :/
Maverik770 20. aug. 2021 kl. 11:29 
Oprindeligt skrevet af Maxwell_Edison:
Oprindeligt skrevet af Charls Barkly:
Re posting from another thread.



I think the actual speed is 40 fps but i could be wrong.
Unfortunately I'm AMD and can't find a similar option :/
What Radeon GPU do you have? The newer 5000 and 6000 series Radeon GPUs have an option called "Frame Rate Target Control" located under the Global Graphics -> Advanced area.

However, that is a global setting and will apply to all games. So if you don't want to have to toggle that setting on and off all the time you can control it within each individual game using Radeon Chill.

Go under Graphics and select Wrestling Empire specifically and then under the options for Wrestling Empire you will find "Radeon Chill". You can enable Radeon Chill and then use the Min/Max slider bars to set both to 30 or 40 fps or whatever frame rate you want.

That will force the game to always run at that frame rate.
Sidst redigeret af Maverik770; 20. aug. 2021 kl. 11:30
Maxwell_Edison 22. aug. 2021 kl. 6:57 
Oprindeligt skrevet af Maverik770:
Oprindeligt skrevet af Maxwell_Edison:
Unfortunately I'm AMD and can't find a similar option :/
What Radeon GPU do you have? The newer 5000 and 6000 series Radeon GPUs have an option called "Frame Rate Target Control" located under the Global Graphics -> Advanced area.

However, that is a global setting and will apply to all games. So if you don't want to have to toggle that setting on and off all the time you can control it within each individual game using Radeon Chill.

Go under Graphics and select Wrestling Empire specifically and then under the options for Wrestling Empire you will find "Radeon Chill". You can enable Radeon Chill and then use the Min/Max slider bars to set both to 30 or 40 fps or whatever frame rate you want.

That will force the game to always run at that frame rate.

the FRTC had no options attached to it so I don't even know how I'd make it fix something - I DO think I have access to Chill though so that is a great thing to try, thanks. I'll let you know.
< >
Viser 1-9 af 9 kommentarer
Per side: 1530 50

Dato opslået: 26. juli 2021 kl. 13:56
Indlæg: 9