One Day/Night sensor for switching lights on/off?

[Hethu]

Hi guys, as title says I would like to use one day/night sensor to control all nights in my base. I successfully set it up to control my night lights (circuit 10) outside to switch on at night time, but I can't make it switch off my indoor lights (circuit 9) in the bedrooms at the same time. I tried to connect the lights using the "inactive circuit". I also can't manage it with a second sensor; have you successfully set it up and can give me a hand?

[Flin Fredstone]

I never tried that. If i would want the indoor lights to be set separate i would use a switch for the indoor lights.

[Midas]

The sensor detects night, and than activates the choosen circuit. So if you set your Sleeproomlamps on inactive 1 and your outdoor lamps on active 2, and switch EVERY circuit on the corespondense lampüs correct, at night indoorlamps on 2 are off while these on 1 are on. so every lamp must be wired correctly, but its bedder to use a light switch for indoors, cause of two reasons: after a fight, with much medical care, you need light to work efficient. 2. the energy saved from light bulps is not worth your time, one simple wind power can keep a whole of around 20 bulps active, up to 40 without problems.

Hallways to rooms should always be lit, to make walking easier!

[Daucus]

works fine with sensor for bedroom lights, make sure you dont missed some cable somewhere. They must be in the same electric grid.

[Hethu]

All right guys thanks for the very fast answers! makes a lot of sense to me. Had the light switch thing done already, but I am a fan of automating things so I was just wondering if its possible! Considering this solved :)