Subscribe to download
BAIC BJ-212 Offroad Vechile1976 越野车

This is a realistic vehicle inspired by the 1976 Beijing Auto Works BJ-212, complete with simulated transmission components like an engine, gearbox, clutch, forward/reverse gears, differential, and differential lock. Despite being a simulation,don't treat it as a mere showpiece.—it's got great off-road capabilities!

Vehicle Information:

Number of parts: 258
Vehicle weight: 83.62 units
Drive system: Realistic engine transmission
Suspension structure: Leaf spring, without damping
Top speed: 110 KM/H

Operation Buttons:

Movement: I K J L
Differential lock switch: G
Handbrake: T
Engine switch: U
View: O
Release anchor point: P

Note: After starting the simulation, wait for the body to be fixed to the frame before releasing the anchor point.

Vehicle Performance Introduction:

Engine single-cylinder power: 45 units (provided by the Small Fan part)
Transmission ratio: 2:1 (fixed)
Chassis height: 1.8 units
Maximum vertical obstacle clearance: 2.6 units
Maximum gradient angle: 45 degrees
Maximum roll angle: 46 degrees
Handbrake maximum lockable angle: 40 degrees
Approach angle: 54 degrees
Departure angle: 50 degrees

Additionally, this vehicle uses several skin packs. Please subscribe to the listed skin packs to enhance the vehicle's aesthetics.
The skin packs used are:

color-red Artist: UNIONCOMMANDER
LightGrey Artist: Dese-Tsuterikka
12号军绿 Artist: Starry 1237
Offroad Wheel Skinpack 2 Artist: Akahige33
F3's WheelPack2 Artist: Fnom3

I have also listed the required skin packs in the right-hand column, which can be subscribed to directly.

Attention:If after subscribing, when loading the vehicle in the game, there are issues such as parts deforming or breaking, it might be due to environmental reasons causing abnormal part IDs and coordinate data. If this happens, send me a private message and I'll send you the original documents.



这是一辆参考北汽BJ-212 1976年型制作的拟真传动载具，拥有发动机，减速器，离合器，前进/后退档位，差速器/差速锁等仿真传动机构。虽然这是一辆仿真传动载具，但别把它当花瓶，它的越野性能非常好。

载具信息：
零件数量：258
车辆重量：83.62重
驱动方式：拟真发动机传动
悬挂结构：钢板弹簧，无阻尼
车辆极速：110KM/H

操作按键：
移动：I K J L
差速锁开关：G
手刹：T
发动机开关：U
视角：O
解除锚点：P

注意：开始模拟后需等待车壳固定在车架上后再解除锚点。

车辆性能简介：
发动机单缸动力：45力（风扇动力）
传动比：2:1（固定）
底盘高度：1.8单元
最大垂直越障高度：2.6单元
最大爬坡角度：45度
最大侧倾角度：46度
手刹最大可锁止角度：40度
接近角：54度
离去角：50度

另外，这辆车使用了几个皮肤包。请订阅我列出的皮肤包以提升载具美观度。
使用的皮肤包有：
color-red Artist:UNIONCOMMANDER
LightGrey Artist:Dese-Tsuterikka
12号军绿 Artist:Starry 1237
Offroad Wheel Skinpack 2 Artist:Akahige33
F3's WheelPack2 Artist:Fnom3

我也在右边分栏中列出了需要的皮肤包，可以直接订阅。

注意：如果在订阅后，在游戏内加载该载具出现零件变形，断裂的情况，可能是因为环境原因导致零件ID与坐标数据异常。如果有这种情况出现，私聊我，我会给你发原始文档。