Scrap Mechanic

Scrap Mechanic

Nincs elegendő értékelés
Dash 8-300
   
Díjazás
Kedvenc
Kedvenc
Törlés
Fájlméret:
Közzétéve:
Frissítve:
1.112 MB
2019. ápr. 10., 10:29
2020. máj. 4., 15:43
8 változásjegyzék ( megnézés )

Feliratkozás a letöltéshez
Dash 8-300

Leírás
******************************
* DASH 8-300 How to fly *
******************************

- Enter via the hole on the left side of the fuselage
- Press 0 (on the numpad) and wait for the startup (~20s)
- Needs sufficient runway and obstacle clearance for takeoff

Controls:

WASD - Pitch / Roll
1 - Engine Power +
2 - Engine Power -
3 - Wheel Brake (Button)
4 - Flaps up
5 - Flaps down (0° - 8° - 16° - 24°)
6 - Gear up / down
7 - Elevator Trim up
8 - Elevator Trim down
9 - Parking Brake (Switch)
0 (Numpad only) - Engine / Systems Master

------------------------------------------------------------

This airplane is designed to feel like a real commercial turboprop. It takes some practice time to get used to, but once you get the hang of it, it provides a satisfying flying experience.

- The engines, like real turboprops, take a few seconds to reach the desired power setting. Handle the throttle with care.

- The props spin at a speed of up to 3000 RPM, any collision when running will likely cause problems with the wing parts.

- Keep the power above 50% in the air, otherwise the plane will stall. Always trim for your current speed (buttons 7 & 8).

- Make sure the power is set to idle before turning off the engines!

Creation by LeftPlaying 2019
2 megjegyzés
JakeThaTanker 2019. dec. 30., 6:51 
i got mods missing...
Kub Pone 2019. jún. 29., 4:01 
love it also most realistic thing ive seen