Scrap Mechanic

Scrap Mechanic

Pas assez d'évaluations
Dash 8-300
   
Récompenser
Ajouter aux favoris
Favoris
Retirer des favoris
Taille du fichier
Publié le
Mis à jour le
1.112 MB
10 avr. 2019 à 10h29
4 mai 2020 à 15h43
8 notes de changement ( voir )

S'abonner pour télécharger
Dash 8-300

Description
******************************
* DASH 8-300 How to fly *
******************************

- Enter via the hole on the left side of the fuselage
- Press 0 (on the numpad) and wait for the startup (~20s)
- Needs sufficient runway and obstacle clearance for takeoff

Controls:

WASD - Pitch / Roll
1 - Engine Power +
2 - Engine Power -
3 - Wheel Brake (Button)
4 - Flaps up
5 - Flaps down (0° - 8° - 16° - 24°)
6 - Gear up / down
7 - Elevator Trim up
8 - Elevator Trim down
9 - Parking Brake (Switch)
0 (Numpad only) - Engine / Systems Master

------------------------------------------------------------

This airplane is designed to feel like a real commercial turboprop. It takes some practice time to get used to, but once you get the hang of it, it provides a satisfying flying experience.

- The engines, like real turboprops, take a few seconds to reach the desired power setting. Handle the throttle with care.

- The props spin at a speed of up to 3000 RPM, any collision when running will likely cause problems with the wing parts.

- Keep the power above 50% in the air, otherwise the plane will stall. Always trim for your current speed (buttons 7 & 8).

- Make sure the power is set to idle before turning off the engines!

Creation by LeftPlaying 2019
2 commentaires
JakeThaTanker 30 déc. 2019 à 6h51 
i got mods missing...
Kub Pone 29 juin 2019 à 4h01 
love it also most realistic thing ive seen