Abonneren om te downloaden
1:1 Tower Crane(build your own sandbox tower!)

Hello everybody, after a one-month separation, I'm back now.
I accepted an artwork job and drew it for 20 days. Sorry for make you wait for such a long time.
----
Let's say something about this creation:
It is a realistic tower crane, has a height of 57 metres, with 630 blocks.
You can see there are five storeys on the ground, numbering 1 to 5. Use the tower crane to lift them and make your own sandbox tower!
You can also try to lift other creations. Manually delete the five storeys is strongly recommended. The tower crane itself has only 490 blocks.
Recommended time scale: 50%-80%
----

Controls:

If you know nothing about civil engineering or crane-operating specification, strongly suggest you start with NEWBIE MODE, by pressing key F2.

In newbie mode, everything will be easy. I choose some less popular keys to make sure it won't occupy the control of other machines.

Rotate tower: left/right bracket
Pull hook trolley: F9/F10
Pull ballast trolley: F7/F8 (no need in newbie)
Hook up and down: minus/equals
Grabber: 0
Rotate the hook: back slash
Remember don't drag the hook or cargo when they are suspending in air! You must put the cargo on something or on the ground, then use drag tool to adjust position. In real world there are several workers on your target place. They help you pull the cargo to it's correct position. Same as the drag tool.
Firstly lift the storey with number 1. Put it on the big scaling block which lays beside the tower. Then press key 1 to separate, press 0 and throw the remains.
And no.2 press 2, and no.3,4,5.
Lastly use drag tool, place the top core. Finished!

----

Are you ready for EXPERT MODE?This will be really hard. Press F3 to get start!

In newbie there're pins on the tower and balloons lifting 5 storeys. But no pins or balloons in expert!
Now the tower crane is same as a real one. The five storeys regain their original weight. No.1 is the heaviest, up to 200x ballast weight.
Take care, do everything slowly in expert, and must use F7/F8 to keep ballance. It takes 5 or more minutes to finish the first storey, be patient!

Tips for expert mode:

1.Never drop your cargo from the air! Or the tower falls.
2.Use frequent tapping instead of holding F7 F8 F9 F10 minus equals.
3.Don't try to lay a smaller number storey on a big number.
Good luck!

----
Do you notice that there are three big ballasts on the ground? I call them burden ruler. They help you to import a machine and put it on a suitable place. If a 200x weight machine is further from tower than the 200x ballast, the tower can't lift it.
----
@疯狂的斯大林 - PZKPFW IV D Tank: http://steamcommunity.com/sharedfiles/filedetails/?id=916896073
@StarTark™ EXK Mk.117 - British MBT:Centurion MK 7 Tank: http://steamcommunity.com/sharedfiles/filedetails/?id=872713575
@Salsamage - Volvo ec480c Excavator: http://steamcommunity.com/sharedfiles/filedetails/?id=712006170
@Shadé - Osean Federation Arkbird: http://steamcommunity.com/sharedfiles/filedetails/?id=894590854
@zep - Draconis super car: http://steamcommunity.com/sharedfiles/filedetails/?id=904463486
@Spiderling Studios - Graham: http://steamcommunity.com/sharedfiles/filedetails/?id=821738440
I really don't know why the Graham always breaks my tower when I was trying to import it! I tried 10 times! The Graham did nothing but my tower fell itself!
@Ser Vold - TowerCrane: http://steamcommunity.com/sharedfiles/filedetails/?id=511693929
You bring me an inspiration! Thankyou!