Crazy Machine 3 全成就指南（All Achievements Guide)

本指南将为全成就获得提供一些思路，希望能对完成成就提供一定的帮助。
This guide will provide some ideas for obtaining all achievements, and hope to be helpful in completing the achievements.

序(Preface)

本指南只对成就获取提供简单思路和提示，具体一些关卡通过建议在bilibili搜索视频攻略。
虽然是很老的游戏了，但是指南中并没有中文指南，所以简单写写希望能对需要的玩家有所帮助。

Considering that this is the only guide for achievements on steam, I add an english version of content, aiming to help more gamers who want achievements of this game.
I know that this is an old game. However there would always been new players and it is truly interesting and challenging, I hope you can enjoy this game.
I only provide the general idea and some tricks to get the achievements, but not detailed walkthrough. You can get specific answer of every puzzle on some video sites.

解密战役(Puzzles in Campaigns)

这些成就通过完成关卡即可获得，难度循序渐进，内容一般是在一套联动装置中去掉一部分零件来让你安装。零件有几大类，常会重复出现，也有部分属于某关或某章节特定存在。了解机器的作用是完成关卡的首要步骤，其次是找到联动装置（一关会有一个或多个）的起点和终点（有靶子的地方），然后根据关卡要求分析，大部分关卡都可以不那么容易地完成。实在不行可以参考视频教程，有时会存在零件安放好后却达不到预期效果，重新开始关卡或重启游戏即可解决。

You will get these achievements by passing corresponding levels, The difficulty would gradually increased with your process. Normally you need to accomplish the removed parts of a set of linkages(It is like the Domino Effect). There are several categories of parts, which often appear repeatedly, and some belong to a certain level or a certain chapter.
To go through a puzzle, the first step is understand the use of your gadgets. Then you have to find the starting point and the destination(where there is a target) of the series of linkage devices(there could more than one line). The last step is fill your gadgets to the right places. Sometimes there may be bugs that you put the gadgets in the right place but useless, just restart the game.

机器工坊(Workshop)

自制机器在上方菜单栏“我的机器”中。

You can make your own machines in "MY MACHINES" in the upper menu bar.


打开“我的机器”中的“新的机器”，进入机器制作界面，勾选右上角“高级编辑器模式”，点击左下角“打开目录”，在“打开目录”右侧会出现“组装新的零件”，从左侧栏选择零件随意组装，然后点击右下角“显示机器或部件的属性”，输入部件名称，部件描述，捕获部件截屏，然后点击下方分享将部件上传到steam创意工坊，成就完成后可以删除刚刚上传的创意工坊物品。

Click the "+" of "New Machine" to enter the machine making interface, check "Advanced Editor Mode" in the upper right corner, click the "Open/Close Catalog" on the bottom-left and then the"Create new part" right to it. Select the parts from the left column to assemble at will, and then click "Show/Hide properties of Machine or Part" in the lower right corner. Enter the name, description and capture a screenshot, then click the "Share" to upload it to steam workshop so that you get both achievements. You can delete it on steam after that.


完成零件成就后可通过中间下方的按钮“离开部件编辑器”或重新打开“新的机器”进入机器编辑页面。
机器与零件类似，但需要至少五个零件，打开右侧“显示机器或部件的属性”，输入机器名称，任务文本，截屏等后分享机器即可。

Let's go back to the machine editing page. What you need to do is same as above, the only difference is that a machine required 5 parts.


这个我记得不太清了，应该是在创意工坊订阅一个机器并且运行即可。

To achieve this, you have to subscribe a machine in the workshop and play it.

迷你游戏(Mini Games)

迷你游戏都使用了交互部件，并且大部分游戏的惯性十分明显，导致操作难度较大，这里提供一个降低难度的方法，就是在游戏开始后点击屏幕下方“开始/停止机器”的右边中间的按钮“慢动作 。游戏计时以及部件移动都会十分缓慢，这样可以大幅提高容错率，降低游戏难度。

You have to control a certain part or character in Mini Games (except for "Eye-catcher". These games would be hard to control and has a time limit. Don't worry, there's a shortcut: click the button "Slow Motion" on the right of "Starts/stops machine simulation" at the bottom of the screen.. The timing and movement of parts will be very slow, which can greatly improve the fault tolerance rate and reduce the difficulty of the game.


气垫船操作难度不高（慢动作),地图上的障碍会随着分数增加而提高，注意躲避障碍和自己的其他车就行，不过金牌还是需要耐心的。

Hovercraft action is easy (Slow motion), you should pay attention to the obstacles and your other cars in case that they colliding with each others. Gold medals requires patience.


夺眼球难度同样不高（慢动作），但需要注意几点，
1.点击眼球时从球会有些许延迟再消失，但音效会立即响应，不要连续多次点击同一个眼球；(可能发生在配置比较低的电脑上）
2.点击一个眼球后需要等到音效消失后再点第二个才会计入分数，不要过快的连续点击；
3.分数是按连续正确点击眼球数叠加的，所以不要点错颜色。
综上，打开声音，跟着音效点击眼球，可以轻松获得金牌。

"Eye-catcher" is also not hard. Pay attention to the flow points:
1.(may occur on computers with relatively low configuration)When the eyeball is clicked, there will be a slight delay from the ball and then disappear, but the sound effect will respond immediately, do not click the same eyeball multiple times in a row;
2.After clicking one eyeball, you need to wait until the sound effect disappears and then click the second one before it will be counted into the score. Don't click continuously too quickly;
3.Scores are superimposed by the number of consecutive correct clicks on the eyeballs, so don't click the wrong color.
To sum up, turn on the sound, click the eyeball with the sound effect, and you can easily get the gold medal.


大理石地图首先熟悉地图，注意切换视角（数字键123），之后就可以随意操作了，主要注意在边缘移动别掉下去就行。

In the Master of marble game，you have to familiar with the map first, and change the viewpoint with number key 1,2,3. Just start your game after the two preparations. Don't fall off the edge.


昆虫馆也就是打飞机游戏，操作还算顺手，主要躲避激光，拿金牌也许要多打几次。（我也挺菜的）

Insectarys is the typical airplane game, it would be easy under slow motion, but take care of the laser.


圣诞老人小助手的操作手感也是差的不行，从左下角取货，右边三个轨道哪个亮灯就把哪个颜色的包裹送过去，只需要躲避炸弹不被炸死就行，不过需要预判，有时候炸弹追着你跑。金牌非常需要耐心。

Santa's little helper is the hardest game in my opinion, you have to get right color gift from the bottom left and send it to the corresponding conveyor belt. The only thing to do is dodging bombs,but it could be hard, you need some predict its trajectory. You have to be patient to achieve the gold medal.



跑和跳就是一个普通的2d横版闯关收集星星的游戏，除了垃圾的手感，需要稳一点，同时速度要快，否则分数很难达标。

Jump'n'Run is an ordinary 2D horizontal version of the game to collect stars. It's not very easy to control, you need to be stable and fast, otherwise the score will be difficult to achieve.

[应是天河将倾覆]

好

[josida]

迷你游戏里面，“跑和跳”、“圣诞老人小助手”建议用正常速度，手感熟悉了就好过，慢动作玩反而折磨。然后其他的迷你游戏慢动作就比较容易。

[pakka]

好

[先出三把圣剑]

好

[蓦然回首]

好耶

[Wangswik]

谢谢大佬！现在只剩跑和跳了

[Gwyndrich]

@Wangswik 我一开始也是这样，steam论坛上大家都反映这样，反正多试试几次应该可以的。开上加速器，起码你得连得上创意工坊。机器构成不用复杂，随便拼凑几个也算数的。

[Ice]

@Wangswik 不好意思手抖把你评论删了

[Ice]

可以看看这个
https://www.bilibili.com/video/BV1Vx411M7ZH?p=1

[Ice]

@Wangswik 开个加速器试试？