Scrap Mechanic

Scrap Mechanic

Nedostatek hodnocení
Class 91 Train LNER Locomotive
   
Ocenit
Přidat do oblíbených
Oblíbeno
Odebrat z oblíbených
Velikost souboru
Přidáno
Aktualizováno
214.341 KB
21. srp. 2019 v 14.37
22. srp. 2019 v 10.49
Poznámky ke změnám (2) – zobrazit

Klikněte na „Odebírat“ pro stažení položky
Class 91 Train LNER Locomotive

V 1 kolekci od uživatele RossB
Trains by RossB
27 položek
Popis
Hi, this is my new train creation, based on the BR Class 91 Locomotive, in the LNER (Ex-VTEC) livery. This locomotive is powered (in real life) by overhead lines, and the creation features a controllable pantograph and line-voltage indicator to simulate this.

Features of the class 91:
-Fully operational interior and exterior lighting
-Operational pantograph
-2 bogies, each with 4 wheels and suspension
-Powered through thrusters
-Working wipers on rear cab windows
-Cab setup procedure, featuring AWS self-test*
-Locomotive can be driven from either end (2 cabs), the rear cab is not normally driven from and can be connected to mk4 coaches

Cab Setup Procedure for 91:
1. Turn the masterkey (key 7). This will initiate a 3-second AWS self-test sequence. (In real life, this has to be acknowledged, however in game wait 3 seconds and the alarm will stop).
2. Setup lighting in both cabs as desired (key 4 = headlights, key 5 = tail lights, key 9 = cab lights)
3. Set reverser to desired direction (key 3) (ON = Forwards, OFF = Reverse)
4. Raise the pantograph (key 6 (toggle)). Once raised, the white line voltage light will light.
5. Control the train using throttle and brake (keys 1 and 2 respectively), and the horn using key 8.
6. Wipers can be activitated (in the rear cab only) using key 0.

When exiting a cab of 91:
1. Ensure throttle and brake are off and the train is stationary
2. Lower the pantograph (optional)
3. Turn off lights (or leave tail lights on)
4. Turn off the master key
5. Turn off the cab lights (optional)
6. Wait at least 3 seconds before entering a cab again (due to AWS* logic)

Controls of 91:
1. Throttle
2. Brake
3. Reverser (ON = FORWARD; OFF = REVERSE)
4. Headlight switch
5. Tailight switch
6. Pantograph Toggle Switch
7. Master Key Toggle
8. Horn
9. Cab Lights
0. Wipers (Rear cab only).

Note(s):
-There are two unassigned switches on the left side of each cab which can be used to control passenger doors if coaches are connected.
-You can connect more thrusters (provided in centre of loco) to increase speed.

Link(s):
-First Class Mk4 carriage: https://steamcommunity.com/sharedfiles/filedetails/?id=1844316811
-East Coast liveried class 91: https://steamcommunity.com/sharedfiles/filedetails/?edit=true&id=1844988075

Enjoy!
---
*AWS (Automatic Warning System) only operational during start up.
Počet komentářů: 13
Czorny 7. kvě. 2020 v 4.17 
@RossB Thanks
RossB  [autor] 6. kvě. 2020 v 6.13 
@Black Arrow - Try Again Now, I have added another mod
Czorny 1. kvě. 2020 v 3.35 
i dowlanded every single mod and i can't spawn it
RossB  [autor] 20. lis. 2019 v 5.05 
Hi. I think you should just search for train tiles on workshop then make a custom map
AzzaMods.com 20. lis. 2019 v 2.08 
What map do you suggest to use this on?
RossB  [autor] 23. říj. 2019 v 3.05 
I could create the DVT, but there would be too much lag to connect them together so I don't see much point
Cam 30. zář. 2019 v 7.38 
what about the DVT
NotanA330 1. zář. 2019 v 12.57 
What mods do I need?
Gratiskatze 30. srp. 2019 v 10.18 
The amout of mods you used blows my mind. Looks awesome!
RossB  [autor] 26. srp. 2019 v 9.30 
Not sure. Just search on workshop. I may have some basic tiles ..