Install Steam
sign in
|
language
简体中文 (Simplified Chinese)
繁體中文 (Traditional Chinese)
日本語 (Japanese)
한국어 (Korean)
ไทย (Thai)
Bahasa Indonesia (Indonesian)
Bahasa Melayu (Malay) BETA
Български (Bulgarian)
Čeština (Czech)
Dansk (Danish)
Deutsch (German)
Español - España (Spanish - Spain)
Español - Latinoamérica (Spanish - Latin America)
Ελληνικά (Greek)
Français (French)
Italiano (Italian)
Magyar (Hungarian)
Nederlands (Dutch)
Norsk (Norwegian)
Polski (Polish)
Português (Portuguese - Portugal)
Português - Brasil (Portuguese - Brazil)
Română (Romanian)
Русский (Russian)
Suomi (Finnish)
Svenska (Swedish)
Türkçe (Turkish)
Tiếng Việt (Vietnamese)
Українська (Ukrainian)
Report a translation problem

If you are a beautiful strong black woman, someone will put this in your comments.
╚═══════════════════ ೋღ☃ღೋ ══════════════════════╝
Important Chemicals:
70% nitric acid (for best yield and results, use above 70% fuming nitric acid)
98% sulfuric acid (lower concentrations arent usable)
erythritol (found in stores as a low-calorie sugar substitute)
water
ice
ammonium nitrate (optional)
baking soda
Materials:
1 liter beaker
ice bath
stirring rod/magnetic stirrer
1 liter erlenmeyer flask
5 liter beaker
glass/plastic funnel
coffee filter(s)
Procedure:
Start by slowly mixing up the 2 acids in the 1 liter glass beaker (200 mls of nitric acid and 200 mls sulfuric) while the beaker is inside a ice bath to keep it cool.
Do not let the temperature rise above 30C-40C during the mixing of the acids.
ALWAYS add sulfuric acid TO the nitric acid, as the nitric acid has more water in it, adding it to the sulfuric acid will generate more heat.
When the acids are cooled sufficiently, start adding erythritol to it while stirring after each addition.
ADD SLOWLY! Do not let the temperature rise to above 20C to avoid a runaway and risk of detonation.
Personally i was able to get away with adding about a teaspoon of erythritol every 5 minutes, however do watch out for temperature spikes and add SLOWLY, for example half a teaspoon, stir, if temperature stays the same, keep adding slowly.
See what works best for you, dont take risks.
After all erythritol is added, you will notice the mixture thicken up to a very goopy consistency, this is a good sign.
Stir the mixture while its like this for about 5-10 minutes and then leave it for 3 hours (if you have a magnetic stirrer, keep it on during the 3 hours.) Keep it in the ice bath and monitor it every 10-20 minutes to see if anything changes.
Meanwhile, place 3 liters of water in a 5 liter beaker into the freezer, let it cool.
Now grab your 3 liters of icey water, then pour your mixture with the acids into the 3 liters of water. Stir constantly, and if you see a white precipitate in the mixture this means youve done everything correctly.
Keep mixing until its completely mixed with the water, then filter this mixture using coffee filters and a funnel, after youve filtered out the powder in the solution, you can discard the remaining liquid (beware it is still very acidic).
Now, we need to wash our powder while still in the funnel by pouring warm water over it, not too hot, just warm.
Wash it with about 300 mililiters of distilled, clean water, before dissolving about a packet of baking soda in another 300 mililiters of water, and pouring that over the powder aswell, before washing it for the last time with 300 mililiters of distilled water to get the baking soda out.
Now you have clean ETN, ready to be dried and fired up immediately, if youd like to store this explosive youll have to do more to clean it as if it is stored in this state the trace acids inside it will destabilize it and cause it to catch fire (or even explode in large amounts) after a month or two.
Trace acids can be removed thru recrystalization.