Εγκατάσταση Steam
Σύνδεση
|
Γλώσσα
简体中文 (Απλοποιημένα κινεζικά)
繁體中文 (Παραδοσιακά κινεζικά)
日本語 (Ιαπωνικά)
한국어 (Κορεατικά)
ไทย (Ταϊλανδικά)
Български (Βουλγαρικά)
Čeština (Τσεχικά)
Dansk (Δανικά)
Deutsch (Γερμανικά)
English (Αγγλικά)
Español – España (Ισπανικά – Ισπανία)
Español – Latinoamérica (Ισπανικά – Λατινική Αμερική)
Français (Γαλλικά)
Italiano (Ιταλικά)
Bahasa Indonesia (Ινδονησιακά)
Magyar (Ουγγρικά)
Nederlands (Ολλανδικά)
Norsk (Νορβηγικά)
Polski (Πολωνικά)
Português (Πορτογαλικά – Πορτογαλία)
Português – Brasil (Πορτογαλικά – Βραζιλία)
Română (Ρουμανικά)
Русский (Ρωσικά)
Suomi (Φινλανδικά)
Svenska (Σουηδικά)
Türkçe (Τουρκικά)
Tiếng Việt (Βιετναμικά)
Українська (Ουκρανικά)
Αναφορά προβλήματος μετάφρασης
I use a Xonar DGX, and on Ubuntu I get about four or so different sound output selections as well as the on-board sound. Unlike in Windows, where only two outputs appear and the normal speaker output is selected by default. When I first installed Ubuntu, I had to perform speaker tests on each output to find the right one(the speaker output was actually labeled as "Headphones 2").
(just trying to cover a basic problem, this may not be your issue but even people who are great with computers can overlook things)
Hello,
I don't see my Xonar Essense STX listed under Sounds Settings. In the list, there are only these following sound devices:
- HDMI Digital output ( this came from my R9 270x & my LG 23", both connected by a HDMI cable).
- Corsair Vengeance 1500 ( my USB Headset. It's connected to my rig )
- CM88 somthing something ( this is probably represent my motherboard's sound chip )
On my Ubuntu 13.04, my Xonar Essense STX sound device is detected & listed under Sounds Setting, it works fine but not in steam os :(
Cheers.
Hello,
Thanks for your reply. I would try out your suggestions later and would post here the result.
Cheers.
CMI8788 is actually the PCI audio processor chip on your card that ASUS has renamed to AV200.
In alsamixer everything is unmuted.
Booting my daily drive with ubuntu 12.04 everything works fine and dandy.
Is it possible to not use pulse-audio? I'd much rather just use alsa.
I've tried every single one both in steamos settings and in desktop mode settings and there's absolutely no sound.
I've been trying to get alsa to work but shutting off pulse causes freezing.