Instalează Steam
conectare
|
limbă
简体中文 (chineză simplificată)
繁體中文 (chineză tradițională)
日本語 (japoneză)
한국어 (coreeană)
ไทย (thailandeză)
български (bulgară)
Čeština (cehă)
Dansk (daneză)
Deutsch (germană)
English (engleză)
Español - España (spaniolă - Spania)
Español - Latinoamérica (spaniolă - America Latină)
Ελληνικά (greacă)
Français (franceză)
Italiano (italiană)
Bahasa Indonesia (indoneziană)
Magyar (maghiară)
Nederlands (neerlandeză)
Norsk (norvegiană)
Polski (poloneză)
Português (portugheză - Portugalia)
Português - Brasil (portugheză - Brazilia)
Русский (rusă)
Suomi (finlandeză)
Svenska (suedeză)
Türkçe (turcă)
Tiếng Việt (vietnameză)
Українська (ucraineană)
Raportează o problemă de traducere
Make sure the PSU is not connected to any device when testing.
Just google/online search "pc power supply jumper bridge".... & "pinout 24 pin atx bypass switch".
Also, when you get the new PSU, disconnect everything else that doesn't require it to post.
Only run the new PSU with the motherboard (ram, video card, k&m) and of course monitor.
If it boots and shows BIOS on screen, you know that those components are good..
Then power it down and connect all the other devices; hard drives, etc..
Good Luck!
I actually had a mobo fail, and thought at first that it was my PSU, because the entire PC & the PSU didn't do anything.
So I tested the PSU alone with a Jumper Bridge and it started up, then I put the PSU on a different PC and it worked. I figured out later that the motherboard was the one that took a dump(must have shorted out somewhere somehow), fortunately all the other components survived.
PC problems stink!
figured it out after i'd ordered a new psu and was disassembling the old one to look for the short.
The electron goo, you are suppose to bonk puppet pal mitch not your psu
well, it looks like it's a psu problem after all.