Tutte le discussioni > Discussioni di Steam > Off Topic > Dettagli della discussione
"Screw in with confidence" meme?
What is that meme about? From my understanding, some guy on The Verge made a video showing how to build a PC, but it's apparently disastrous and completely inaccurate?
< >
Visualizzazione di 1-15 commenti su 20
Something like that. Also I think it can be a message to do not be afraid "to use the screwdriver" on your PC. But I think its a bad idea if u aint got knowledge about it :steamfacepalm:
Ultima modifica da Catnip; 2 dic 2020, ore 15:35
If your asking if the Verge build was disastrous and inaccurate.

Then, Yes

The build was atrocious.

-PSU was out in so the fan was choked off.

-Poured thermal paste all over the CPU

-Put memory in side by side, so no dual channel support.

-Puts a rubber band around their wrist and calls it an “Anti-Static Bracelet”

-Forgot to put fans on their AIO water cooler, then uses the long bolt and goes all the way through the radiator.

-Says it doesn’t matter what slot you put your graphics card into

That’s just the few that I remember off the top of my head

Here is a super cut of builders reaction to it

https://youtu.be/M-2Scfj4FZk
The one thing I remember my IT friend told me about building computers, is that you should never screw in the standoff screws of your motherboard too tight. Otherwise the heat would cause it to expand too much and crack.

"Screw in with confidence"? Yeah, no. Not that tight.

Unless he told me something that's false. Kind of hard to know what's truth and what's fiction. Makes sense to me though.
There's a redundant preposition in that sentence.
Ultima modifica da Radene; 2 dic 2020, ore 16:09
I screwed in a motherboard once with confidence, and then I was greeted by plasma and the smell of ionized air as I forgot the posts. LMAO
OMG. LMAO! I just watched that reaction video. Like, I'm not even a PC builder (I've always bought pre-built and just put in new parts in the right place if I wanted better performance and higher settings) but even I would know the most basic ♥♥♥♥ on what goes where and how to align them. Who the hell did Verge hire to make that PC and how have they not been sued for misinformation?!! lol "Take this brick". IT'S A PSU, YOU UNCULTURED SWINE!!!
Messaggio originale di Iggy Wolf:
OMG. LMAO! I just watched that reaction video. Like, I'm not even a PC builder (I've always bought pre-built and just put in new parts in the right place if I wanted better performance and higher settings) but even I would know the most basic ♥♥♥♥ on what goes where and how to align them. Who the hell did Verge hire to make that PC and how have they not been sued for misinformation?!! lol "Take this brick". IT'S A PSU, YOU UNCULTURED SWINE!!!

Think about how many people that video went through before they published it to their YouTube. You think the editor or someone would have caught that.
Messaggio originale di Still Frozen:
Messaggio originale di Iggy Wolf:
OMG. LMAO! I just watched that reaction video. Like, I'm not even a PC builder (I've always bought pre-built and just put in new parts in the right place if I wanted better performance and higher settings) but even I would know the most basic ♥♥♥♥ on what goes where and how to align them. Who the hell did Verge hire to make that PC and how have they not been sued for misinformation?!! lol "Take this brick". IT'S A PSU, YOU UNCULTURED SWINE!!!

Think about how many people that video went through before they published it to their YouTube. You think the editor or someone would have caught that.

I'd think an "or someone" did, and said "Publish it; this'll get us so many clicks."

Remember, every time you view a "stupid" video, "as a joke", or "just to laugh at it"; you're still giving them money and the feedback that they should make more such videos.

So you either stop watching them, or admit your hypocrisy. Either works.
Messaggio originale di Still Frozen:
Messaggio originale di Iggy Wolf:
OMG. LMAO! I just watched that reaction video. Like, I'm not even a PC builder (I've always bought pre-built and just put in new parts in the right place if I wanted better performance and higher settings) but even I would know the most basic ♥♥♥♥ on what goes where and how to align them. Who the hell did Verge hire to make that PC and how have they not been sued for misinformation?!! lol "Take this brick". IT'S A PSU, YOU UNCULTURED SWINE!!!

Think about how many people that video went through before they published it to their YouTube. You think the editor or someone would have caught that.
Editors don't exist anymore, as everyone realised that quantity of content was what got them paid, not carefully curated and well-edited content
Ultima modifica da pants; 2 dic 2020, ore 17:06
Never screw in with confidence. Always check to make sure you aren't putting the long screw in the short hole.

Also read the motherboard manual so you know what speed your PCI slots are and what your memory channels are.

As for the orientation of the PSU - how??? The screw holes should only fit one way.

The anti-static wrist band isn't a big deal. Just touch the bare metal of the case before you touch any components. What you need to be afraid of is a static zap like if you shuffled your feet on carpet. If you don't feel a zap after touching metal you're fine.

The pea-sized blob on the CPU is a little OCD. I like to use a toothpick to spread my thermal paste on the CPU. Modern day CPU's have bigger die sizes than in the old days and I've found I need to use almost 2 pea-sized blobs to get an even spread all the way to the edges. I spread because if you just use the pea in the middle method when you smoosh it down it might not smoosh all the way to the edges and then you get hot spots on the CPU.

Now granted I only use non-conductive thermal paste. If I was using a metal-based thermal paste I might be a little more OCD about it.
Was the guy at Verge being serious though? It could be a masterful troll video.
Bitwit has been using that tag line for ages.

It predates the Verge video.

https://bitwit.tech/shop/screw-with-confidence-triblend-black

He even joked about the video...

https://mobile.twitter.com/bitwitkyle/status/1109855275727482880

:qr:
Ultima modifica da cSg|mc-Hotsauce; 2 dic 2020, ore 17:54
Found an article about Vox, the Verge's parent company issuing fair use takedowns against reaction videos to this:

https://arstechnica.com/tech-policy/2019/02/the-verge-briefly-censored-youtubers-who-mocked-its-bad-pc-building-advice/

Which is hilarious.

It sort of sounds like they were taking the build seriously.
< >
Visualizzazione di 1-15 commenti su 20
Per pagina: 1530 50

Tutte le discussioni > Discussioni di Steam > Off Topic > Dettagli della discussione
Data di pubblicazione: 2 dic 2020, ore 15:19
Messaggi: 20