Need old AT PSU for Pentium 233 MMX and Voodoo 3 3000 card.

[Costa Rica's Army]

Title say all xD

Just doing and old gaming PC and I found out that yesterday I was using the PC for a good long time with the fan of the PSU being dead, not spinning at all... That old PSU seems to be a good one: It didn't blow, catch fire or did anything wrong to the PC. I wonder if can get a better one but I'm totally out dated about this, any recommendation would be appreciated. The old PSU is a 200w.

Thanks!

[_I_]

if the board is atx with the 20pin power plug, any current power supply will work

if its the at 2x6pin connectors, then you will need an at power supply

pentium mmx will be near when they switched between them

[Costa Rica's Army]

Автор сообщения: pike

http://forums.guru3d.com/forumdisplay.php?f=8

thanks for the link! I will check it out.

Автор сообщения: _I_

if the board is atx with the 20pin power plug, any current power supply will work

if its the at 2x6pin connectors, then you will need an at power supply

pentium mmx will be near when they switched between them

It's a AT PSU. But I don't know to much about those old PSU. There are a few on Amazon and Newgg, but I don't know if they are the cheaps ones.

[_I_]

i would recomend an atx-at power supply adapter
http://www.newegg.com/Product/Product.aspx?Item=9SIA0ZX2C31911

just make sure the case has a power switch that locks on/off


for a decent cheap atx power supply, cx430 is currently $40/20ar
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026

[Costa Rica's Army]

Автор сообщения: _I_

i would recomend an atx-at power supply adapter
http://www.newegg.com/Product/Product.aspx?Item=9SIA0ZX2C31911

just make sure the case has a power switch that locks on/off


for a decent cheap atx power supply, cx430 is currently $40/20ar
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026

Woooow that is aweome. I didn't know about those adaptors. Yepe, the case is also old, with that kind of button, lol, it has the turbo button too.

Thanks for the help!

[Costa Rica's Army]

Hey I have a question but first: I ended up buying an old new AT PSU. It has the four cables to attach to the pwoer switch, a friend helped me to attach them in the corect order. Now, the pwoer supply has a fifth cable, green one with a yellow line, I assume that is the ground cable. Now my question is: ¿Where should I attach it? I assume to the case but, ¿will not that cable send electricity to the case and electrocuted me?. May sound a little silly but better safe than sorry.