Best liquid cpu cooler under 60mm thick?
So yeah i need a good cooler but i don't have much space. I have 60mm max for both the rad and fans.
< >
Zobrazeno 19 z 9 komentářů
What case do you have? Any chance you can mount a fan/rad on the outside and put the tubing through grommets?
frozencpu.com

Don't go less than 25mm thick fans though. It may greatly reduce the effectiveness of the radiator.
I have a 450d. And i don't want to mount anything outside. I want this pc to look good. Thats why i am currently considering either h100i or h110. But i read some bad stuff about corsair coolers and they are a bit old too. Would like something new, reliable and good looking.
Check out the Enermax Liqtech 240 i really like mine very sturdy for an (AiO) cooler.
An aio is nice since it has the pump internally. You can do that with an custom loop.. they're built into rads.. but they're not cheap.

What cpu?
Naposledy upravil bmac1191; 24. pro. 2014 v 11.00
I don't want custom loops. It's too complicated and i only need cooling for the cpu anyway, which is an i7-5930k.
Its really not.. rad, pump/res combo, block, tubing, clamps.. if its your first loop I recommend doing cpu only.

According to corair's website, the h100i is 52mm thick. Should get the job done.
You can fit Corsair H110 into 450D case, nothing wrong with this cooler, better then most competitive closed loops.
Nothing wrong with Corsair Liquid Coolers; anything can have a short life or be DOA, and based off just that, it's kind of a mute issue if that is all you are really referring to.

I'd go H100i
http://www.corsair.com/en-us/hydro-series-h100i-extreme-performance-liquid-cpu-cooler
The "i" models have Windows software (Corsair Link) allowing you to better monitor/control the device and fans connected to it.

If you do have an issue, Corsair has very good support & warranty. But do read the Corsair Forum (or that of what u end up thinking about buying) and know the signs of a bad pump is all I can really suggest.
Naposledy upravil Bad 💀 Motha; 24. pro. 2014 v 22.22
< >
Zobrazeno 19 z 9 komentářů
Na stránku: 1530 50

Datum zveřejnění: 24. pro. 2014 v 4.37
Počet příspěvků: 9