AIO Conecction Help

[Ahoishot]

Hi. i want to buy this AIO look pick pls, but it seems like i have to connect Fan and PUMP to CPU_FAN...my Mobo doesnt have CPU_OPT i gues the curve should just be at 50% all time and ramp up to 100% over 70C ? Or should i just connect the pump to sata and let it run straight and the fans to CPU_FAN? thx

https://i.postimg.cc/D0Cm0fwN/AIO.png

[Bad 💀 Motha]

It shows that all fans (for monitoring) connect to a single header (CPU_FAN)
Everything gets it's power via SATA power cable.

What CPU are you using?

[Ahoishot]

Originally posted by Bad 💀 Motha:

It shows that all fans (for monitoring) connect to a single header (CPU_FAN)
Everything gets it's power via SATA power cable.

What CPU are you using?

i7 9700 and it doesn't show power via sata... That's an optional rbg controller not?

[Ahoishot]

I gues if the noise isn't to heavy I go for sata on the pump and the fans to the CPU_FAN some recommendations about the curve for the fans?

[Bad 💀 Motha]

Ok what brand + model is this?
Typically an AIO doesn't get any power from the Motherboard as the Pump alone needs a couple amps then around 2-3 amps for the fans. You can't possibly be doing that from Motherboard fan headers

[Ahoishot]

Originally posted by Bad 💀 Motha:

Ok what brand + model is this?
Typically an AIO doesn't get any power from the Motherboard as the Pump alone needs a couple amps then around 2-3 amps for the fans. You can't possibly be doing that from Motherboard fan headers

enermax liqmaxflo 360
The claim the pump needs only 0,43A

There u go, just open the first Q&A from cooling.

https://www.enermax.com/de/faq/category/cooling