intel I7-12700K and DDR5 at 5200MHZ.Need ASAP help(Tight refund window)

[pagio12000]

I upgrade my MOBO to "GIGABYTE B760M AORUS ELITE AX DDR5" and i got 2x16 Gigs Ram "KINGSTON KF552C40BB-16 FURY BEAST 16GB DDR5 5200MHZ CL40".Anyone with similar setup to tell me if they work?Because the official intel page the say this CPU supports 4800 ddr5.After some research found about that can even get up to 6000MHZ using xms memory profiles.

[404NotFound]

Yup your good

[Monk]

Should work, but hat is VERY slow memory, like, below cheap ddr4 3200 speeds, if its under 6000MHz the CL should be sub 30 really atleast.

[404NotFound]

Originalmente postado por Monk:

Should work, but hat is VERY slow memory, like, below cheap ddr4 3200 speeds, if its under 6000MHz the CL should be sub 30 really atleast.

I agree

[pagio12000]

Thanx for your replies!But from the 2x "KINGSTON KF426C16BB1/16 FURY BEAST 16GB DDR4 2666MHZ"Witch i have now its a good improvement.An i am on tight budget because i also got a Corsair 850W full modular gold+ PSU 1TB nvme kingston ssd (I was on sata 3 Kingston 350MB R\W AND i got a Gigabyte 4080 OC super for 1200 euro-usd i was on gigabyte 3080 OC(The 10GB vram model).I was looking to buy the 5080 model but i change my mind when i saw the actual reviews-Benchmarks and the price witch is 1450 euro-usd for the standar Gigabyte model not the OC version witch i always get."that is 1600 euro-usd"(If your scratching your heads about the prices......Welcome to Greece).And i am aiming for 1440p resolution with dlss "quality-balanced" Medium RT settings,High general settings(I dont mind if i had to drop 1-2 to medium) and 60fps(I dont mind drops in rare heavy scenes).According to my research and experience i will be fine.

[Troll]

Originalmente postado por Bad 💀 Motha:

4800 is just the default.

I'd return the MB and RAM and pick something better.
The Motherboard doesn't even support DDR6 6000; terrible.

While you may not be wrong, you are a very rude person.

[pagio12000]

Originalmente postado por Bad 💀 Motha:

4800 is just the default.

I'd return the MB and RAM and pick something better.
The Motherboard doesn't even support DDR6 6000; terrible.

DDR 6 MOBOS AND DDR6 Ram????!!!!!!!What are you talking about????!!!!!!!There is not such thing..................

[_I_]

the board says it can use upto ddr5 7800
https://www.gigabyte.com/Motherboard/B760M-AORUS-ELITE-AX-rev-1x/sp#sp
it looks good enough, but not great for k cpus
12+1+1 can give the cpu around 300w to its corss

try enabling xmp in bios

or return the ram and get a ddr5 6000-6200 cl30- kit
5200 cl40 is really bad ram

post a cpuz validation link
http://www.cpuid.com/softwares/cpu-z.html
cpuz -> validate button -> submit button
it will open a browser, copy the url (address) and paste it here

[Bad 💀 Motha]

Sorry I meant DDR5 6000 CL30; sometimes don't catch the type-o when I use my phone.
But yea that would be best to get.

[pagio12000]

Originalmente postado por Bad 💀 Motha:

Sorry I meant DDR5 6000 CL30; sometimes don't catch the type-o when I use my phone.
But yea that would be best to get.

Ok

[pagio12000]

Originalmente postado por _I_:

the board says it can use upto ddr5 7800
https://www.gigabyte.com/Motherboard/B760M-AORUS-ELITE-AX-rev-1x/sp#sp
it looks good enough, but not great for k cpus
12+1+1 can give the cpu around 300w to its corss

try enabling xmp in bios

or return the ram and get a ddr5 6000-6200 cl30- kit
5200 cl40 is really bad ram

post a cpuz validation link
http://www.cpuid.com/softwares/cpu-z.html
cpuz -> validate button -> submit button
it will open a browser, copy the url (address) and paste it here

Thanx for your interest but i have disassemble everything and formatted my old disk(I used it as as external "usb 3.2 to sata 3"for my laptop.worst case scenario if i saw a bottleneck from the ram i get better ram in a couple of months.

[_I_]

its very hard to see ram bottleneck
if the cpu cant perform to its fullest, its either the board or ram limiting it, maybe drive

[pagio12000]

Originalmente postado por _I_:

its very hard to see ram bottleneck
if the cpu can perform to its fullest, its either the board or ram limiting it, maybe drive

I will run the same benchmark-stress test for the cpu if the numbers are not the same and are down more than ~5% i will start searching deeper.I really appreciate your interest.I will keep you posted.

[aka]

Make sure to enable XMP in your BIOS settings

You're jolly welcome

[Bad 💀 Motha]

^ Yes that too

[Monk]

5200 cl40 is likely not any faster than your old 2666 sadly.