New PC Compatibility check

[Vault Hunter 101]

Hey I'm thinking about buying a new PC and wanted to ask if these components are compatible, I tried using various websites but some say they are, some say they aren't and I'm stumped, i'm particurarly interested in Mobo compatibility.

CPU: Intel® Core™ i3-13100F Processor [ark.intel.com]
GPU: GTX 1650 4GB (taken from old PC)
Mobo: ASRock B760M-HDV/M.2 Micro ATX [www.asrock.com]
RAM: Kingston Fury Beast, DDR5, 16 GB, 5600MHz, CL36 [www.kingston.com]
PSU: MSI MAG A650BN 650 W [www.msi.com]
CPU cooler: Endorft Spartan 5 [endorfy.com]
Case: Natec Armadillo G2 [natec-zone.com]
HDD/SSD: (Taken from old PC)


If you have any suggestions regarding upgrade/part switch im welcome to all possibilities, please know that I have a very tight budget


Thanks for your time <3

[Cathulhu]

Yeah, airflow wise, this looks absolutely terrible.

[Zef]

Also..an I3?

Try to go for I5 at least or even better AMD equivalent.

If you're on a tight budget you're better off buying second hand parts compared to everything new.

[Miki mac fiddlement]

引用自 Vault Hunter 101：

Hey I'm thinking about buying a new PC and wanted to ask if these components are compatible, I tried using various websites but some say they are, some say they aren't and I'm stumped, i'm particurarly interested in Mobo compatibility.

CPU: Intel® Core™ i3-13100F Processor [ark.intel.com]
GPU: GTX 1650 4GB (taken from old PC)
Mobo: ASRock B760M-HDV/M.2 Micro ATX [www.asrock.com]
RAM: Kingston Fury Beast, DDR5, 16 GB, 5600MHz, CL36 [www.kingston.com]
PSU: MSI MAG A650BN 650 W [www.msi.com]
CPU cooler: Endorft Spartan 5 [endorfy.com]
Case: Natec Armadillo G2 [natec-zone.com]
HDD/SSD: (Taken from old PC)


If you have any suggestions regarding upgrade/part switch im welcome to all possibilities, please know that I have a very tight budget


Thanks for your time <3

Decent build, but yeah I would highly recommend you getting a decent case with good airflow, if your budget is a bit tight try checking Antec NX292 case, if it is available in your area.

But other than that, congratulations on your new upgrade!

[Vault Hunter 101]

Hey hey!
Thankyou all for your replies, I really appreciate them, now to answer some of your concerns

引用自 Zef：

Also..an I3?

Try to go for I5 at least or even better AMD equivalent.

If you're on a tight budget you're better off buying second hand parts compared to everything new.

Sadly where I live secondhand parts for newer models don't really exist, it's very hard to find used CPU above 10th gen, everyone sells either as new or demands same price (or sometimes even higher!) as a new part, as for AMD

引用自 Miki mac fiddlement：

Decent build, but yeah I would highly recommend you getting a decent case with good airflow, if your budget is a bit tight try checking Antec NX292 case, if it is available in your area.

But other than that, congratulations on your new upgrade!

I looked at the Antec NX292 case however it is 3x more expensive than the Natec one I posted, I cannot afford it sadly :/

引用自 smallcat：

All is compatible but get a better case , if possible ! In the future you ll upgrade the GPU and you ll need better air flow .

引用自 Cathulhu：

Yeah, airflow wise, this looks absolutely terrible.

I don't really know much about airflow and cases so I don't know what to look for but could you please look at these cases and see if any of them are better?


Akyga AK939BL [www.akyga.com]

Akyga AK995BK [www.akyga.com]

Akyga AK13BK [www.akyga.com]

Modecom Harry 3 [www.modecom.com]

Deepcool Smarter [www.deepcool.com]

Natec Cabassu G2 [natec-zone.com]

Aerocool CS-1102 [aerocool.io]


Thankyou again for all your replies and suggestions, I really appreciate them all <3