Steam installeren
inloggen
|
taal
简体中文 (Chinees, vereenvoudigd)
繁體中文 (Chinees, traditioneel)
日本語 (Japans)
한국어 (Koreaans)
ไทย (Thai)
Български (Bulgaars)
Čeština (Tsjechisch)
Dansk (Deens)
Deutsch (Duits)
English (Engels)
Español-España (Spaans - Spanje)
Español - Latinoamérica (Spaans - Latijns-Amerika)
Ελληνικά (Grieks)
Français (Frans)
Italiano (Italiaans)
Bahasa Indonesia (Indonesisch)
Magyar (Hongaars)
Norsk (Noors)
Polski (Pools)
Português (Portugees - Portugal)
Português - Brasil (Braziliaans-Portugees)
Română (Roemeens)
Русский (Russisch)
Suomi (Fins)
Svenska (Zweeds)
Türkçe (Turks)
Tiếng Việt (Vietnamees)
Українська (Oekraïens)
Een vertaalprobleem melden
If your computer is running fine but you are unable to turn it off because you mouse isn't working or whatever, you should instead hit the power button once, this will make it do a normal shutdown.
Cases that don`t have separate reset button usually have function of doing the reset by pressing and holding down the on/off button.
Windows does not fully shutdown anymore, it sleeps to enable it to start faster and uses whats called a hibernation file to store system state during the 'shutdown'. By using the reset button you have forced a full boot.
Resetting the machine while running will not physically harm it but it can harm the OS, not shutting windows correctly can lead to file corruption which over time will lead to various issues.
Personally I have fast start and hibernation disabled to prevent this kind of error, (if your running with ssd's then fast start is really not needed because they are fast already).
PS; Disabling hibernation will also reclaim around 12gb of disk space on your boot drive that it uses.
Thanks!
I do not recommend connecting the Reset Case Button to your Motherboard, to avoid it ever being presses by accident. As you can do the same thing by holding down the Power button for 5-secs. to force the PC off. Then wait a few secs and turn it back on again. But this as well as the reset button are a last resort measure. Users should not be using those methods on a regular basis. Doing so could result in your OS drive getting corrupted; or any connected drive for that matter.
Just simply holding the power button down, unplugging, turning the switch off; those are all considered unsafe ways to recover.
Reset is not any safer means.
holding power (til shutdown) and tapping it again, is no difference from hitting reset
unplugging or the psu power switch could damage some components i fits a poor psu
If it was writing data to this disk it stops immediately as there is no more operating system telling the hardware what to do.