EK-AIO 280 D-RGB Fans ramp up

[Zarginnia]

Have Ryzen 7 5800x
Installed my first ever AIO and when i start the computer the fans ramp up and goes down and from time to time when not doing anything it does that and going to youtube it ramps up and fades away. Do i need to adjust fan curve in BIOS or is it something else? Would ECO mode work to not have the fans ramp up?

[_I_]

make sure the pump is on the cpu_pump header, and bios has that set to 100% all of the time
and fans are on the fan header, set that to 0% at 60c and 100% at 80c

[Zarginnia]

Pump is the one on the CPU should everything be at 100% all 4 nodes in bios fan cruve?

[_I_]

if the mobo does not have a cpu_pump header use a sata/molex to fan header adapter for the pump

[Zarginnia]

İlk olarak _I_ tarafından gönderildi:

if the mobo does not have a cpu_pump header use a sata/molex to fan header adapter for the pump

What i mean is that the pump is on the the cpu chip at the motherboard and that is the pump fan while the cpu fan is the fans on the radiator. correct? that one is on the pump_fan and the fans on the radiators are in the cpu_fan

[Zarginnia]

Are radiators 100% silent or do they make "radiator" noise when theres some kind of load?
When i play i hear this coil whine from the radiator NOT the pump, the radiator that is at the top in the case with fans on. They are plugged in the right headers pump to pump_fan and radiator fans on cpu_fan.

[_I_]

what mobo exactly?

[Zarginnia]

İlk olarak _I_ tarafından gönderildi:

what mobo exactly?

_________My current setup_________

Mobo: MAG X570 TOMAHAWK WIFI
CPU: Ryzen 5800x /w EK-AIO 280 D-RGB
GPU: 6800XT Red Dragon
PSU: Corsair TX750M
RAM: G.Skill Trident Z Neo DDR4 3600Mhz 32GB
SSD: Samsung SSD 870 EVO 2TB (SSD)
NVME: ADATA SX8200PNP
NVME: Samsung SSD 970 EVO 1TB
Monitor: LG 27'' UltraGear 27GP850 QHD Nano IPS 180 Hz