Instalar o Steam
Iniciar sessão
|
Idioma
简体中文 (Chinês Simplificado)
繁體中文 (Chinês Tradicional)
日本語 (Japonês)
한국어 (Coreano)
ไทย (Tailandês)
Български (Búlgaro)
Čeština (Checo)
Dansk (Dinamarquês)
Deutsch (Alemão)
English (Inglês)
Español-España (Espanhol de Espanha)
Español-Latinoamérica (Espanhol da América Latina)
Ελληνικά (Grego)
Français (Francês)
Italiano (Italiano)
Bahasa Indonesia (Indonésio)
Magyar (Húngaro)
Nederlands (Holandês)
Norsk (Norueguês)
Polski (Polaco)
Português (Brasil)
Română (Romeno)
Русский (Russo)
Suomi (Finlandês)
Svenska (Sueco)
Türkçe (Turco)
Tiếng Việt (Vietnamita)
Українська (Ucraniano)
Relatar problema de tradução
I'm assuming it's a Gigabyte motherboard or similar?
Their BIOS have a whole bunch of "beep producing" settings under the "PC Health Status" section, including processor max temperature and different fan failures.
Do you know the beep pattern? Such as long. short, short, short... repeat.
Continuous Hi-Lo Beeps = CPU Overheating
It's most likely warning that the CPU fan has failed and/or it can't keep the motherboard cool. Pretty such it's saying, stop what you are doing, save your work, and shutdown so I can cool off and not damage myself.
Under BIOS - you might have temperature alerts setup, you can adjust these or turn them off, but it's best to keep the temps low if possible.
Ensure CPU fan is spinning and there's enough airflow inside the case. Feel around the back of the PC case, is it hot air? Make sure it isn't hot pocketing (recycling around the rear, back into the graphics card area). Have a gap behind the case for the hot air to escape. Avoid having the PC case on carpet, rather have it raised up on a wood/glass panel.
If dust build up around the fans/heatsinks, clean it out with a can of compressed air (you can get from most computer stores pretty cheap and does a great job).
If all else fails, it might be thermal paste on the CPU needs to be redone. This would require taking off the stock cooler. I would suggest getting a third party (better) one while at it. However, leave this for last as it's a bit of work.