Ryzen 7 7800X3d temps with Noctua NH D-15

[L.o.D.]

I had to do a reseat of the chip, but ran out of Noctua's paste and used an old syringe of Coolermaster's paste. But what temps should I see with this cooler when just browsing/idling?
Coretemp shows it at 43 degrees cel atm.
This is in a Fractal Design Torrent compact case with 2 140s on the bottom as well.

[C1REX]

Publicado originalmente por L.o.D.:

Temp in the 40s seems a bit high to me.
Is there no way to manually control the fan speeds with the Fractal case?

40C for this CPU is not high. You could go a bit lower with a bigger case and 420 AIO + offset bracket but not by much.

Here are my temps: https://ibb.co/XktgQXV

My case + cooling: https://ibb.co/P1xFdvm


If you wish to push for lower temps you may get like 2 degrees better results if you get Noctua's offset bracket, turn the CPU cooler fans up and maybe (I don't have any experience with that) underclock your CPU.

I just don't understand why would you push for better idle temps when they are meaningless for any other reasons than bragging rights. If bragging is the goal then custom water cooling, cpu delidding, direct die, liquid metal and other terms is what you need. But again - why would you do it to yourself?

[L.o.D.]

C1REX, your pics don't load.

I did find an app that can individually control each fan, if it finds that sensor has speed control.
It's simply called Fan Control. https://getfancontrol.com/
If you have daisy chained fans, it won't register completely.

[JohnMars78]

Publicado originalmente por L.o.D.:

Temp in the 40s seems a bit high to me.
Is there no way to manually control the fan speeds with the Fractal case?

What's your ambient temp, though?
If it's 10 degrees, your cooling is not good enough.
If it's 30 degrees, your cooling is great.
Context matters.

Publicado originalmente por L.o.D.:

10 cel hotter than my i7 7700k. Both systems are like 5 feet apart.

I doubt that cooling and enclosures are the same on both systems.

At an average 15-20 ambient, both CPUs are doing great, actually.

[spicy little monkey]

Publicado originalmente por Stacked:

Publicado originalmente por SuKI:

47 to 50 degrees C idle

84 degrees C max load

Using air cooling. I run my fans very quiet, so barely audible until the CPU reaches 75*c. This avoids the fans constantly ramping up in speed and slowing down.

My temps with multiple browser tabs open and video playing. Same cooler, no turbo boost.
https://imgur.com/a/nRonJPl

yeah but what's your ambient temp? how many pc fans do you have? how fast are the fans on the cooler running?

So many variables.

[L.o.D.]

Publicado originalmente por JohnMars78:

What's your ambient temp, though?
If it's 10 degrees, your cooling is not good enough.
If it's 30 degrees, your cooling is great.
Context matters.

It's 24cel in my 1 bedroom apartment.

[JohnMars78]

Publicado originalmente por L.o.D.:

Publicado originalmente por JohnMars78:

What's your ambient temp, though?
If it's 10 degrees, your cooling is not good enough.
If it's 30 degrees, your cooling is great.
Context matters.

It's 24cel in my 1 bedroom apartment.

Publicado originalmente por JohnMars78:

At an average 15-20 ambient, both CPUs are doing great, actually.

[Zef]

Publicado originalmente por L.o.D.:

Temp in the 40s seems a bit high to me.
Is there no way to manually control the fan speeds with the Fractal case?

You're Joking right?

New gen AMD cpu's run hot and can easily run at 90° daily without worry.

[L.o.D.]

Publicado originalmente por Zef:

Publicado originalmente por L.o.D.:

Temp in the 40s seems a bit high to me.
Is there no way to manually control the fan speeds with the Fractal case?

You're Joking right?

New gen AMD cpu's run hot and can easily run at 90° daily without worry.

Brand new build that I just set up last night.

[spicy little monkey]

Publicado originalmente por L.o.D.:

Publicado originalmente por Zef:

You're Joking right?

New gen AMD cpu's run hot and can easily run at 90° daily without worry.

Brand new build that I just set up last night.

It's normal. The 3d vcache runs hot

[L.o.D.]

I have got the temp down a bit after installing Fan Control and not using the Torrent's fan hub.

[spicy little monkey]

Publicado originalmente por L.o.D.:

I have got the temp down a bit after installing Fan Control and not using the Torrent's fan hub.

What were the temps under load now? What did you use to test cpu under load?

[L.o.D.]

Publicado originalmente por SuKI:

Publicado originalmente por L.o.D.:

I have got the temp down a bit after installing Fan Control and not using the Torrent's fan hub.

What were the temps under load now? What did you use to test cpu under load?

No real loads yet as I haven't moved my game drives over yet.

[Carlsberg]

Publicado originalmente por Wynters:

Do NOT USE Ryzen Master...

Use good thermal paste. Silver-based or graphene-based but NEVER silicone-based crap.

I would NOT TRUST CoolerMaster paste at all.

Don't believe the hype, I have a 7000 series Ryzen and just used some Stainless Steel Anti-sieze paste. It just needs to conduct heat, nothing special.

[spicy little monkey]

Any thermal paste / compound is sufficient for 7800x3d.

[L.o.D.]

Publicado originalmente por Carlsberg:

Publicado originalmente por Wynters:

Do NOT USE Ryzen Master...

Use good thermal paste. Silver-based or graphene-based but NEVER silicone-based crap.

I would NOT TRUST CoolerMaster paste at all.

Don't believe the hype, I have a 7000 series Ryzen and just used some Stainless Steel Anti-sieze paste. It just needs to conduct heat, nothing special.

I'm using coolermaster paste that was sitting around for years and my temps are low/mid 40s cel.