H50 mounting bracket

[Prowlcorp]

How the heck do i do this? Im guessing the adhesive is supposed to stick it to the MB? On the same problem piece, which holes do i put the pins in? I have ASUS Z170 Pro gaming

[Wholesome Wych]

The H50 does not support Socket LGA 1151.

[Prowlcorp]

it supports 'LGA 115x' its said to support 1150 and ive seen a lot of people say it supports 1151 thusly

[Wholesome Wych]

Socket Support Intel LGA: 1150, 1155, 1156, 1366[www.corsair.com]

[Prowlcorp]

how much different is 1150 from 1151?

[Wholesome Wych]

Diposting pertama kali oleh Prowlcorp:

how much different is 1150 from 1151?

Upon doing further reading, it seems that 1151 uses the same mounting holes as 1150

Still seems odd that Corsair did not update compatibility on their page

[Prowlcorp]

Which slots do i use on the backplate then? It doesnt label them

[Wholesome Wych]

If it's the same as 1150, then maybe try the holes for 1150?

[_I_]

1156, 1155, 1150, 1151 all use the same mounts

use the mount that fits the board
be sure to install the back plate


this vid is for 1366, but very similar, use the 115x mount
https://www.youtube.com/watch?v=PUxoFiFuS_g

[Prowlcorp]

there are 3 slots each side unlabaled on the backplate and the book. 4 sides. that many combinations. I have 1 attempt when i remove the adhesive. I do not know which is which

[_I_]

http://www.corsair.com/en-us/blog/2011/june/faq-mounting-your-hydro-series-h50-h70-to-socket-1155

test fit before you take the tape backing off

[Prowlcorp]

Ah.....that was one of my problems, exactly square it doesnt need to be

[Wholesome Wych]

Diposting pertama kali oleh Prowlcorp:

there are 3 slots each side unlabaled on the backplate and the book. 4 sides. that many combinations. I have 1 attempt when i remove the adhesive. I do not know which is which

The book does not have dedicated instructions for 115x?

[Prowlcorp]

No